The nabalis G10 has bearings and could last longer keeping the handle gap. The screw does get loosened after months of use but it comes with extra screws and once the screw get loosened, you can screw it out and assemble it back with some threadlocker to make it work again. Not very perfect but I think it's good enough for this price.
@@nabalis9626 I got a new one from Amazon. I love the accessibility of the knife it’s a great stater option. And believe it or not on my new one a tang pin is loose. I have terrible luck with tang pins. Anyway I love this product keep up the good work.
Follow the instructions in this video and there will be no problem. At the same time, generally, the problems of butterfly knife can be maintained by replacing parts or adjusting. So don't worry too much about this problem. If you have any questions, contact me and I will help you!
Do not try to take it apart, the holes for the screws are poorly made and you can’t get the long ones back in all the way, so the plastic will not be attached correctly
@@nabalis9626 sorry if it came out as rude. But when I went to take the latch off, the screws were in fine, but now they won’t go back in. I’m pretty sure it’s just the holes in the blue reflective plate aren’t big enough
Hey I’ve had my nebalis for about a week now, dropped it a couple times and now one of the bearings in the handle is making a noise when I move the handle almost like a clicking noise. Does this mean the beating is broken?
@@nabalis9626 my tool that cane with the trainer lost some of the spokes while i was trying to unscrew the latch. This caused my tool to lose some teeth and the screw doesnt have any grip points anymore wich means i cant unscrew the latch anymore
The torx screwdriver that came with my balisong seems to be too small on the long end for the smaller pins they can't screw them out
can you make a video on your new g10 releases?
Very Good Tutorial Thank you :D
does it matter wich side up the bearings are put on?
i think so but im not 100% sure
It doesn't matter.
Hi there, firstly, love this! Secondly, I threaded the screwhead trying to do this and cant get it out, any tips?
Hold the handle tightly and screw it hard！
Can u show how to change the shiny reflective plates please
ua-cam.com/video/oC-qysPigQ8/v-deo.html It's been
@@nabalis9626 hey, can i modify your product to have washers/bushings instead of bearings or would that not be possible?
@@boywithbali3830 It's impossible.
Where did you get the black one?
amazon
does the nabalis keep the handle gap or does it break like other cheap knives to the point where the latch wont close?
The nabalis G10 has bearings and could last longer keeping the handle gap. The screw does get loosened after months of use but it comes with extra screws and once the screw get loosened, you can screw it out and assemble it back with some threadlocker to make it work again. Not very perfect but I think it's good enough for this price.
The g10 was great but a tang pins fell out after a week. Can you make one with zen pins?
Did you try to install it back? Contact our customer service through email and he will give you the answer.
@@nabalis9626 I got a new one from Amazon. I love the accessibility of the knife it’s a great stater option.
And believe it or not on my new one a tang pin is loose. I have terrible luck with tang pins. Anyway I love this product keep up the good work.
Y’all screwed mine in so tight, that when I tried the screws stripped. Any solutions?
My spring latch would stick and it gets annoying, whay do I do???
Great Tutorial! Thanks
I have tried possibly everything and the middle screw won’t come out. It’s kinda annoying
I recieved my nabalis a few days ago and wanted to remove the latch however 1 of the little screws is stripped i cant get it out what should i do...
Same issue mate idk what to do
Does this work with the new model
Yes!
Thanks for the quick reply on such an old post
oh you lift the handle up I just tore the spring out
same lmfao, I messed something up while doing that so in the end I still had to open it up D:
😂
Same lol
Hey, the nabalis you sent me had really bad hardware to the point where I cant put it together again. Can you please send replacement hardware?
Sure, please contact me, nabalisong@outlook.com.We will give you a satisfactory sevice
@@nabalis9626 Just contacted your email
@@skippin Yea, he sent me new hardware !
@@skippin He was very nice
@@raxzorii9382 Thanks, i was wrong about him since he just replied to my email.
The bearings of my blade loosen themselves to the point where i feel my blade will fall off after 5 minuets of flipping what should i do.
Loctite the screws
@@egribikayt5518 Yes! Loctite it with the blue loctite
I can't get the second screw to turn no matter how hard I try and I'm afraid I'll strip the screws. Any advice?
@Daxo Nope, I never did
Since I have thread locked the hardware would doing this currently cause any damage to the pieces in my balisong?
Follow the instructions in this video and there will be no problem. At the same time, generally, the problems of butterfly knife can be maintained by replacing parts or adjusting. So don't worry too much about this problem. If you have any questions, contact me and I will help you!
Thanks👍
My second screw won't come out no matter how hard i try to turn, am I doing something wrong?
Do not try to take it apart, the holes for the screws are poorly made and you can’t get the long ones back in all the way, so the plastic will not be attached correctly
If your problem cannot be solved, you can contact us for replacement!
@@nabalis9626 sorry if it came out as rude. But when I went to take the latch off, the screws were in fine, but now they won’t go back in. I’m pretty sure it’s just the holes in the blue reflective plate aren’t big enough
same thing with me
I stripped my screwes plz help
just got it yesterday but my screws wont budge
when you remove the spring latch?
How do you put the latch back on?
The same operation as shown here: ua-cam.com/video/POfJxkDfpO8/v-deo.html
Can you show us how to remove bearings
You just need to remove the head screws.
Ok but it can’t tighten
@@whatyoumean3750 This is impossible. It may require more patience. Did you reinstall it with Loctite?
Yea I got it now thanks
why is my 2nd screw so hard to unscrew?
Because when you remove the first screw, the nut of the second screw cannot be fixed. So you may need to loosen both screws at the same time.
@@nabalis9626 Oh, thanks, eventually i got it out
My screw stripped what do I do
Add screw Loctite and screw it back, this is a small matter
can someone please tell me why removing the latch is so important?
It is not important but it makes better sound when you flip
@@kubak.4092 oh
ok
Hey I’ve had my nebalis for about a week now, dropped it a couple times and now one of the bearings in the handle is making a noise when I move the handle almost like a clicking noise. Does this mean the beating is broken?
There may be something drop into the bearing and you need to clean the bearing. 😀
i love how my screwdriver broke after trying to gently remove the screws....
Buy a new one and you'll get two screwdrivers!😃
@@nabalis9626 dont want the second one to break aswell...
@@thisismy3rdacclol655 What happened? I think I can help you!
@@nabalis9626 my tool that cane with the trainer lost some of the spokes while i was trying to unscrew the latch. This caused my tool to lose some teeth and the screw doesnt have any grip points anymore wich means i cant unscrew the latch anymore
@@thisismy3rdacclol655 Small screws use T6 screwdriver. Many trainers on Amazon are equipped with such a T6 screwdriver, maybe....
Are we just going to ignore how long his finger nails are?😂😂😂
bro i cant get my shit to open ong
Could you tell me more information?
@@nabalis9626 my main screws is in really tight
My screw stripped lmao
It can be repaired. Tell me the specific situation and I will give you the method.