You truly have the most in-depth and informal reviews on audio equipment that I’ve yet to find on the whole platform. Thanks for the time/work out into the videos!
Properly, the U3 can be used as a console output as it is the one that has the design (and selector) to work with Line level signal. Although it is striking that there is no selector on the transmitter to differentiate.
Doing some research on there two systems, I see that the NUX B3 is about $100+ more than the Xvive U3, and it seems the NUX B3 feel a bit cheaper in build quality. If I wanted the XLR to TRS wire, I can get one from the same country these are made for under $10, so that does not account for the large price discrepancy. The lack of line level on the B3 tells me it would be harder to use them as a wireless speaker due to the higher volumes that Mic level outputs. Meaning on your mixing board, you may really have to watch your volume levels working with the B3. Ultimately, as a DJ/KJ I have gone with the Xvive U3 and have never looked back. They seem to me to be geared more towards anything a DJ could want and not as single purposed as the NUX B3. Your mileage may vary.
The xvive is to wide to go into a xlr out reverb pedal. And most gigs are around 4 hours. So they need to make the batteries longer lasting. Or u will be short of your gig. But good video
Can anyone help me? I wanna try something different. I have the Mixstream Pro Go (it can run on battery only) so I wanna walk around the bar at my next gig while mixing but I need both speakers to receive music from the transmitter on my controller but it only comes with 1 receiver. Suggestions welcome! Thanks in advance!
These are a bit chunky, on my canon c100 mark ii I'd want to use 2 of these at once but they won't fit side by side, would 2 of these still work if I plugged the receiver into a 0.5m xlr cable, then plugged that into my camera?
Hi. I would like to connect my microphone to a vocal processing unit from TC Helicon. Will this work? The wireless unit connected to the pedal and then I wired connection from the vocal pedal to my mixer?
One set of transmitter+receiver replaces one xlr cable. So, when you use two xlr cables for a pair of active speakers (left and right), you'l need two sets.
Too much emphasis on cosmetics and not a lot on electronics. How long the unit is, packaging, lights etc, aren't really important. What is the recharge time for the batteries? What sort of battery is used AA? AAA? How long does a charge last? Distortion figures? Is plastic or metal used for the housing - i.e. durability? Onboard controls? etc
I have the nux and the joyo, they sound different to me. The joyo sounds more clear but i have to crank the gain. do you have the joyo? do you have the same experiance?
You truly have the most in-depth and informal reviews on audio equipment that I’ve yet to find on the whole platform. Thanks for the time/work out into the videos!
Pro tip: you can watch movies on Kaldrostream. Been using them for watching all kinds of movies lately.
@Gideon Jonathan Definitely, have been watching on kaldroStream for months myself :D
@Gideon Jonathan yea, have been using kaldroStream for since december myself :D
@Gideon Jonathan Yea, I have been watching on KaldroStream for since november myself :)
A thought. If you don’t like the way they (the X-Vive) fit sideways into a consul, you can always use a 1’ mic cable.
Properly, the U3 can be used as a console output as it is the one that has the design (and selector) to work with Line level signal. Although it is striking that there is no selector on the transmitter to differentiate.
For References after asking them: B3 cannot support condenser mics since it has no phantom power while U3c can do.
Doing some research on there two systems, I see that the NUX B3 is about $100+ more than the Xvive U3, and it seems the NUX B3 feel a bit cheaper in build quality. If I wanted the XLR to TRS wire, I can get one from the same country these are made for under $10, so that does not account for the large price discrepancy. The lack of line level on the B3 tells me it would be harder to use them as a wireless speaker due to the higher volumes that Mic level outputs. Meaning on your mixing board, you may really have to watch your volume levels working with the B3. Ultimately, as a DJ/KJ I have gone with the Xvive U3 and have never looked back. They seem to me to be geared more towards anything a DJ could want and not as single purposed as the NUX B3. Your mileage may vary.
The xvive is to wide to go into a xlr out reverb pedal. And most gigs are around 4 hours. So they need to make the batteries longer lasting. Or u will be short of your gig. But good video
Can i combine it with behringer p2 for wireless iem?
Respective battery lives please?
i saw using this nux b3 on behringer pm1 as wireless in ear monitor.
Do these units last 8 hours with continuous audio? My XVIVE lasts 3 hors then dies rapidly. Thanks
Can anyone help me? I wanna try something different. I have the Mixstream Pro Go (it can run on battery only) so I wanna walk around the bar at my next gig while mixing but I need both speakers to receive music from the transmitter on my controller but it only comes with 1 receiver. Suggestions welcome! Thanks in advance!
Can these be used with a rodecaster pro?
NUX B-3 - Wireless 6 channel Transmitter/Receiver for Microphones (2.4GHz) How many hours can be on charge both ? And which one channel is best use ?
So are you saying that the NUX B3 can also be used to send line level audio from your mixer to the speakers?
By any chance did you get an answer to this question?
I have the same question because there is no line option that is in Xvive U3. Please some one provide an answer.
These are a bit chunky, on my canon c100 mark ii I'd want to use 2 of these at once but they won't fit side by side, would 2 of these still work if I plugged the receiver into a 0.5m xlr cable, then plugged that into my camera?
Yess
Hi.
I would like to connect my microphone to a vocal processing unit from TC Helicon. Will this work? The wireless unit connected to the pedal and then I wired connection from the vocal pedal to my mixer?
Yeah... I used to use a Voicelive 3 Xtreme with mine...
Ik this is a little late... But still.
Hopefully this helped ☺️
It certainly should!. I'll be doing this in a few days so I'll confirm
How to buy this wireless system ?
Could you please tell me if these devices would work with a Movo LV4 XLR Lavalier??
If i want to connect a condensor mic, do they get phantompower from the transmitter ?
does NU X need phantom power ?
No, they are rechargeable at most plug in the USB for longer use.
I have two DBR10 speakers. Would I need two transmitters and two receivers?
One set of transmitter+receiver replaces one xlr cable. So, when you use two xlr cables for a pair of active speakers (left and right), you'l need two sets.
Can you try this with a wireless battery speaker?? I don’t no wires when I DJ. Can I charge them into the wireless speaker?
My Xvive U3 works with my wireless Boss S1
Looking for wireless speaker connections
can you use multiple of the B3s at the same time
Can you use 1 transmitter and 4 receivers on 4 speakers or will I need to get 2 transmitters to run 4 receivers to run on each speaker?
By any chance did you get an answer to this question ?
Yess
The xvive are to wide to connect to a vocal pedal
Thanks
Signal intermittent is the most problem of xvive
B3 & U3 looks similar and also the packaging lol
Too much emphasis on cosmetics and not a lot on electronics. How long the unit is, packaging, lights etc, aren't really important. What is the recharge time for the batteries? What sort of battery is used AA? AAA? How long does a charge last? Distortion figures? Is plastic or metal used for the housing - i.e. durability? Onboard controls? etc
I WANT ONE 👍👍👍👍👍
the wireless NU X wireless i mean
Superb
This review barely touches on the tech side...They don't have the same delay, not the same charge lasting length etc etc. Poor review.
Its way to long too be comfortable.... Some other brands like Joyo , made a smaller , better unit for same money
I have the nux and the joyo, they sound different to me. The joyo sounds more clear but i have to crank the gain. do you have the joyo? do you have the same experiance?
If u have a 4 hour gig the battery will go flat so total useless
This version is really disgusting, especially the signal interference.
100th
Xvive is disgusting