Fabricating/Welding on a Flange
Вставка
- Опубліковано 6 жов 2024
- Today we are doing some fabrication, welding on a 16” flange with 1/8-6010 5p+ for the roof, 3/16-8010 Arc 80s all the way out!
Follow us on instagram for more content!
@loya.12
@baylie_bicole18
~STAY BLESSED~
Im about to graduate welding school and your channel popped up on my feed! Love the videos man. You just earned a subscriber 😎
What school bro I just finished myself?
@@martychapel6629 Northwest Technical Institute in Springdale, Arkansas
I finished up Tulsa in Jacksonville,Florida. You plan on welding pipe?
@@martychapel6629 I found a local job aluminum tig welding but I plan on gaining more expierience then busting out with my little brother who also went to school with me.
I cant wait for this lifestyle
Older brother gots the bad side but he gives the better side to the carnal. He take care of you👌🏻. Good to see los dos carnales welding side by side, that’s a true blessing 💪
His rig was kind of on that side.... it’s for sure a blessing to weld side by side!
Luis.... really enjoyed your video. I pipelined back in the 80's and 90's.... Keep up the good work...
Nice job on that huge pipe spool! I used this video to show my students what a day out in the yard may look like...they enjoyed the video.
Is this what you call fabrication, let's see you fab a stair case multi landing,
You are truly Blessed to be able to work with family and do it so smoothly, Cheers
Great videos! Props to both you and your girl for being able to do this for us and keep up the good work! Blessings to both!!👍🏽👍🏽
Thank you! 🙏
@@Luisloya.12 where you get the vest with the fire flap zipper?
Most fitting to fitting will always have a bigger bevel than pipe to pipe...Kool video...30 years + here...👍
If you don’t go all the way to the bottom center of the pipe it’s called what?? Couldn’t hear well. Btw love your videos this style is perfect. No music in the background, right angles and great tips. I’m 19 and in welding school and your vids motivate me! 🇲🇽
We are looking into microphones to get better sound! It is call “short arming”!
I see your south coast welding sticker. I watch a lot of there videos. It would be awesome to see you collab with them and make a video. Your an awesome welder bro.
Y'all are awesome. My husband and I watch them all. Great welder and helper to
Always wanted to be a pipe liner, mad skills Luis you guys are kickin ass.all the best from an old retired Ironworker.
lmao, i couldn't see the other side of that tee for a while... was like wtf you guys two-holing the flange for? wicked tag team, lookin good.
Hah me too
I enjoy watching and may I say your an inspiration to the young people out there and I can't leave out your helper. Keep it going and God Bless you both.
Must be pretty awesome brother inlawing with ur brother bro.
That’s what makes it great bro! Our kids will be watching this one day!
And homie has his chick as a helper, that’s bread and head
Great video, be good to see some more inside shots of the bead while you guys are hot passing and hot filling, much love from
BC Canada!
Thanks for the advice! Will definitely be trying to get more of that!
@@Luisloya.12get sum arc shots bro put that camera under a hood... Still a good video
@@Luisloya.12 awesome content all around I always look forward to seeing your videos!
Speaking as a member of the unemployment truck (aka xray) your welds are textbook sir. Keep up the good work!!!
You& Your team do good work bro! I admire that you film it. Takes alot🔥 keep up the good work
Well done
Good job
Willing to chilling
Goodluck for bright future Growthes
I’ve always been curious, as pipeline welders are you guys doing any sort of bead weave pattern or just dragging the puddle straight in a stitch type movement?
Just drag, if you’re weaving, you’re getting too hot..
Luis, really like your videos, thank you so much for making and sharing....Cheers....Paul in Orlando
Great video! Luis & Bailey! Feel like I’m right there stay blessed 💯🦅
Thank you!!!
Luis i like your rig and watching you weld im not a pipe fitter i did do welding and fab thanks for sharing mark
We can’t wait for more videos of welding ur awesome keep up the hard work ! ✌🏼
Awesome work
Fab days are nice, beats layin in the mud all day
I think that red face is out performing ur brothers Miller, or maybe ur just the better welder lol. Awesome video man.
Great welding skills!! I bet you could make me a bad ass bbq pit!! Keep up the great videos! God bless you two.
Pretty good work.
Awesome welding Bro... I would like to see some Purge Welding SOON
One more Like from Brazil! 👍
Alright Luis, that's a big ass spool piece. Great job, I never had to run 8010,but 7010 hyped. Thanks for sharing.
Thank you sir for watching!!
In the older welding encyclopedias one welding rod that was touted to be one of the best of the best best best root pass welding rods was a 6013 1/8 welding rod to do downhill route passes it puts out a smooth bead like a 7018 drag rod does and it isn't very deep with its penetration therefore you don't have to worry about having blow throughs or ark blow from the end of your rod when putting a root pass it's really a good rod nowadays they just disdain it a little bit and call it a farmers welding rod but the 6013 is a good rod for putting in root passes if you going to use rods I still think the welding industry ought to take the advancement of MiG welding like Chevron oil company does with their inland pipe welders their welders get to put all the root passes downhill with mig but a lot of other industry still want their welders to put in the root pass with a stick which is much slower and even when it's put in right it just don't seem to look as good as a smooth mig rod does for that root pass but that makes too much sense and I have found that the direction that industry is going in today when it comes to the welding industry it seems like anything that makes sense is just tossed out the back door and they put people over welders that are not welders themselves and they don't have a clue of how long it takes to weld up something and that's why they exspect the impossible to be done in a few minutes which normally is going to in all actuality take a few hours to weld it's so backwards it's unreal and it's so depressing for welders to have to weld under supervisors who really don't know nothing about welding
Always been into welding and working out in the field. God willing I'll be starting welding school the next coming semester. Ran across your channel and y'all got some good content, brother. Keep it up and God Bless y'all!
P.s. your channel is gonna blow up!
Very good
Grande loya...muy grande....si señor..!
..sl2 desde galicia...spain...🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸
You are awesome. My guess your weld mask is 200deg cooler than a full face hood.
Nice job bubba stay blessed and not stressed love u and bailey bother
Thats what we try to do! Thanks for supporting us man!
@@Luisloya.12 it's all love bubba
Good Job 👍👍👍
Awesome video btw
Broooo! You should get a dark shade for your camera so we can actually see the puddle manipulation ! It would make a world of difference ! Much love and peace dude
Beast mode on a 500 wall!
Do you have or can you make a video on your grinder rack, building one myself and haven’t seen one like yours till this video
Mad respect for the Loya brothers man. Fucken bad ass welders. 💪🏿✌🏿🤙🏿👍🏿💯👊🏿🍻🍻🍻
Super awesome video man!!! 🔥
Good job fantastic videos tutorial next time brother 👍👍👍
great video, hope one day we can link up to give me some tips, i stay in dallas
keep it up 💯💯
Videos are awsome keep it up
Nice work bro!! Saludos from OKC!!..
Once again an amazing video.
Kaapai e hoa ma,..ngawari hoki te mahi - maatai mahi hai whaka tika..bmw o Aotearoa..'tuu-meke'.. kia ora ✌️👍
Same model Empire torpedo levels that I use - in Australia.
Love these type of videos keep up the great content!
In Chattanooga years ago when I welded for Aerisyn the cone structures of these large windmills where each windmill would generate enough electricity for 650 homes those pipe type structures were large enough to drive cars down the middle of them and sometimes I would have to repair the sub arc welding Welds and I would run downhill mig beads that would be 30 and 40 ft long in with that 0.035 wire or r 0.045 wire when doing it right all those beads would look so beautiful and smooth and you could actually weld up large pipe structures like that so quick and fast with mig and but yet you see a lot of times, likethe flange being welded now that's going to take a while to weld that up it's going to take a while even to put a root and a hot pass in but if they would just hang a little tent over him and let him use a MIG welder oh within 5 minutes he can have the root pass in and then another 5 minutes he can have the hot pass in of course some welders are going to say what's the hurry nobody's rushing this why should we rush the longer we stay and drag out the job the longer we have a job to put money in our pocket so that's what you face with today they hold back good technology that would put in better looking beads quicker and faster all because they want to drag these jobs out
He put in a good root pass
This is great
Great video buddy 👍!! Hey I was just wondering if you still had the footage of the 2 live streams? I couldn't watch it all due to work.
We decided to make most of them private after we end the live man! Just something we kind of agreed on
Is rig pipeline welder and pipeline welder the same? Sorry if this is an dumb question just an junior high school student looking into an good career that I always loved..... Welding
None of my business guys but boiler makers don't weld down hand. That's why we take a 6 G welding test.
During the root pass. Was that a quick look to make sure you are wearing wranglers?!😂😂
Baylie was holding the camera and reached next to her to turn my heat down we finally got an action camera so its easier to mount
Great job.
Great video can u give info on how to get into this industry
asome job
Ive been in welding school doing pipe for about a month now and in my class we only do uphill roots but I see alot of people doing it downhill when I watch people welding pipe why is that? Is it just faster? Also love the videos good work
New sub here brother! Trying to learn some welding ⚡️
nice teamwork
Nice to see we have the same style of welding, I too like to commute with my bow to get a good view of the burn-in. Additional advantage is that any contamination can come up, and you can go a little higher in amperage. When watching videos like this, I like to hear the details of the work, and the variables you are dealing with. If I may advise, don't speed up the recording when editing, if someone finds it takes too long, they are not a professional idiot. Have you subscribed 👍
What is commute with my bow ?
Sorry but that was translated too literally from Frisian to English. What I actually meant by commuting the bow? Working the arc forward and backwards.
@@frisianweldaholic okay right on understood
Badass work
it’s awesome job, i like it 💪
Killa video guys
And gal
When you doing the horse shoe method, do you head it quickly or slowly? I like your videos bud. Keep them coming
Still surprises me none of you guys roll out these easy welds haha. Up here ( canada ) we would be run off position tag teaming a flange lol! Would be in a roller sith 5/32 bead then jump up to 1/4" 7018 to hot pass all the way to cap.
We do things a little different down hea in the south
What's up with all the root grinding, if you are gonna hot pass with 10 anyway?
@@KevinSmith-kx3ks preference
great video!!!!!!!!!!!!!!!! keep it up bro
What bush league are these guys playing in???
Here in 'Berta that big flange would have been roll welded and the final possy would have been the smaller branch of the spool.
Straight 🔥🔥
Amazing..good job.. my form indonesia..👍👍👍
Slick...how about show us how to do a clean tie in on the bottom when u cap it.....at times we get it sometimes it dont......thanks primo from navajo nation
when you tie in overlap a bit accelerate progressively quicker and flick the rod forward to break the arc
stops teaspoon crater and worm holes
How did you start off? As a helper I assume but did you have your own rig or did you just ride with your welder?
Good content a skills guys ✌
Yeah that zetronix camera glasses would help on not having to hold a camera around. Still get HD videos.
I’m getting one for the action camera we got is that the one?
@@Luisloya.12 ah don’t think so. Cause this one has a HD camera in the center of the glasses. Pretty cool. This one guy used it back then on his channel called “bad ass welding video” something like that.
Excellent video any connections out here in Arizona?
Great video 💯
Thanks man!
What happened to the pipeliners that I used to know that what carhartts instead of a hoodie
Love the videos keep it up👍
Thank you!!
Where did you get your arm guard from? I remember you showcasing it in one of your vids but can't find it.
Heat up the flange to avoid cracks and arc blow
Hey man if you can do a video on a 12in pipe 6g with 8010
I like that single cab!!! Any chance your selling
que chingon mi amigo
Runnin 3/16s on 5/32 temp that’s why that pinhole came out
Do you have a video on how you got started, I’m interested but I don’t know anyone In The field I’d love some tips on how to get into the trade. I have no experience
Why you weld down hill on a big bore pipe. I also wanted to ask this question. I'm not sure if it a good one
Damn buddy where’d you get them gloves from
Why two-hole if it was prefab? Quick question
NV didn’t see the outlet on the side 😂
For the root you use electrodes thinner?
Kick ass video's 💵
Looks like you will have some undercut double step up hill it bro come on
No undercut weld was xrayed almost two weeks ago now shot 100%
Excelente video👍
Gracias!!!
Much due respect. 🌱
Saludos Werders
I want to get into welding just basic steel what welder do you suggest?
Do you all wear ear plugs?.. Especially when grinding?
I'm new to the page, been watching for like an hour now 😂 you union or non union?
Non union man!