Kick butt build, I hope my comment pushes you over the top of youtube algorithm, and you channel blows up. If everyone did a little we would see more channels that we respect
Bro nice project I dig it. Fyi that repair stuf u mix up its liquid fix it steel shit works great. Wipe with alcohol like u did then glue it with that stuf which names evscaping me
where did you get the gears for the stepper motors ? I wanted to use steel gears was looking at the same place you got your gear rails from.I need a 8mm inner bore for my stepper motors.
I know CandCNC.net makes a kit that supplies all the electronics and computer but doesn’t supply a table to put them on. If you are looking for a kit that comes with everything and you just have to assemble it, check out avidcnc.com or a lower cost option would be langmuirsystems.com.
If Langmuir was a choose back before I started building this table, I probably would have bought it instead. It’s got all the features my table has but better electronics and a community to support troubleshooting.
Dude, this is the second video I see you posting the same thing....big whoop, you have an Everlast plasma cutter. We get it. Also that's one step above the cheap ebay cut50 cutter. Nobody is gonna be like wooooow.
Good lord you can buy a cnc plasma table for $1500. Just add $400 non Hf plasma cutter and you have a complete system for less than $2000. It's only 24x33" though.
That is an option for sure. And I won't lie, I thought about buying one. my biggest concern with those machines is reliability and technical support. also, the cut size was smaller than I was looking for.
Kick butt build, I hope my comment pushes you over the top of youtube algorithm, and you channel blows up. If everyone did a little we would see more channels that we respect
This is the coolest and best video for me video I have seen on UA-cam. Honest. Thank you
Wow man! Thank you! Thanks for watching!
Wow! Super impressive!! Definitely more content of this! Great job!!! ❤️🐞
خوش کلدئ
Do you have problems with candCNC controller?
Awesome work for a day. A lot of cable chain can open up with flaps on each link. But sometimes, its less work to fish. ;)
Ryan MacEwen hahaha true. Closed cable can keep the inside of the chain a little cleaner.
What tipe of motors? Nema34? Thanks
I like to do made stuff like this , simple and cheap , thank you for your video.
No problem, thanks for watching
Bro nice project I dig it. Fyi that repair stuf u mix up its liquid fix it steel shit works great. Wipe with alcohol like u did then glue it with that stuf which names evscaping me
Hi
that very good setup could you please list the items you bought i want build one .
thanks you
More please !!!! Nice work !!!
Cathal O Mealoid thank you! I have videos on this machine coming soon
More cnc stuff please
Nice job!!
😂 If i had a nickel for every time I left my gantry rack at home...
where did you get the gears for the stepper motors ? I wanted to use steel gears was looking at the same place you got your gear rails from.I need a 8mm inner bore for my stepper motors.
The gears I’m using came with the gantry kit I bought off of eBay. They no longer sell this kit so I’m not sure where you can buy them.
The Off Road Corner I found one it looks the same on eBay for 200.00 and it has the z axis with it
The Off Road Corner I was looking to see if you had done videos on the frame build up but couldn’t find anything on UA-cam on your post
John Thompson that’s a pretty good deal. I think I spent that much without the z axis.
Can something like this be bought as a whole kit?
I know CandCNC.net makes a kit that supplies all the electronics and computer but doesn’t supply a table to put them on. If you are looking for a kit that comes with everything and you just have to assemble it, check out avidcnc.com or a lower cost option would be langmuirsystems.com.
I was eyeing Langmuir. Thinking that may be a good entry point for me and see if it grows into a need for something bigger
If Langmuir was a choose back before I started building this table, I probably would have bought it instead. It’s got all the features my table has but better electronics and a community to support troubleshooting.
Good work bro, I will like to learn from you
That’s awesome to hear. Show what I’ve learned so far and and hope it helps others is my goal. Thanks for watching!
Can I find out the size of the gear rack?
I'm using 16 pitch 14.5 degree pressure angle gear rack. here is a link to what i bought on Mcmaster carr.
www.mcmaster.com/6295k233
@@TheOffRoadCorner thanks
Nice work...
Gosh do I ever want a cnc table for my everlast plasma cutter.
Dude, this is the second video I see you posting the same thing....big whoop, you have an Everlast plasma cutter. We get it. Also that's one step above the cheap ebay cut50 cutter. Nobody is gonna be like wooooow.
IT'S HAPPENING!
Jon Hart haha! One step closer to cutting out your bumper
👍🏻
Good lord you can buy a cnc plasma table for $1500. Just add $400 non Hf plasma cutter and you have a complete system for less than $2000. It's only 24x33" though.
That is an option for sure. And I won't lie, I thought about buying one. my biggest concern with those machines is reliability and technical support. also, the cut size was smaller than I was looking for.
In weld
$4800!? Why?🤣🤣🤣
too expensive tho
It's a pretty expensive investment for sure
ya now a days you can buy a nice table for what he spent
Yeah. In the 8 year it took me to build it CNC table became cheaper hahaha