I build one of this router folowing your steps. The difference is a support to a circular saw and manual move (without electric motor) Thank you for the great idea!
You did a nice job. It looks like you made it with a channel to hold water. I have a small CNC plasma cutter and I put a water table under it and the water really helps to keep the steel cool. I mostly work with thin steel. It looks like it will work great for straight line cutting. At first I did not know how you were doing the track and basically it is just like my machine. Good idea; I can not cut a straight line by hand even if I use a guide. It looks like it took some time to make and I hope that it will serve you for a long time to come. 😀😀😀😀😀😀😀😀😎
workshop from scratch nice job it turned out great! I have also seen Made in Poland plasma track, good work. Now you guys probably have not seen my plasma track but it’s also pretty neat, I went with a different approach, it works more like a chop saw with a back stop, and instead of moving the metal you can just move the cutting head from 90 to 45 and you can also tilt the plasma head, I wired up limit switchs as well. The video is called DIY plasma torch cutting track 👍 I got a smaller channel so it’s not had many views over the last year. Thanks for posting and making cool videos guys!
@@karolmarcinek665 Nie mamy tylko polskich odbiorców, więc aby było dla wszystkich zrozumiałe to co robimy staramy się posługiwać językiem angielskim, który jest bardziej uniwersalnym językiem dla odbiorców, a nawet jeśli nie to w dzisiejszych czasach przetłumaczenie zdania trwa ułamek sekundy:) pozdrawiam
Great Job on the design and execution of your idea! I like the reused drill motor for the gantry drive. 😎😎😎 I could not be sure but did you make the speed adjustable to cut at the best speed for different thicknesses of metal?
How useful is a one axis cutting table? Ok, you can make straight cuts better then with oxy/ace. But can you control a straight cut well, which ends in the material? Like the material has a width of 100cm and you only need a 20cm piece.
Very professional! Are you building these machines for your own shop or for resale? What country are you from? They are so professionally build and finished, all new material, wow!
Thanks man this is very helpful ❤ I want to make one, but I'm afraid there will be a gap between the iron rod and the bearing.what do you think bro? Can I replace the ones sold in the market with these?
I tried that slider style and it didn't work! The 1 1/4" x1 1/4" square tube was slightly too narrow for a tight fit between the bearings no matter what i did ? I used exactly what it looks like your using for all the material. Maybe your washers are thinner then mine which are 1/16" thick, but where whould i find thinner washers ive looked!?
Jasne że polecam jestem z niej bardzo zadowolony, Cormak BS 128hdr, kąty trzyma wiadomo że po wymianie taśmy trzeba kalibrować ale wydaje mi się że tak jest w każdej pile taśmowej :)
hi i want to do the same but have 18 volt motor from old dewalt can you say me what power controler motor power i need and what power supply 18 volt ? my tool have 250/300 watt ! thank you for answer !!
A really great build! You design and workmanship are to be commended! Incredible!
Thank you :)
I build one of this router folowing your steps. The difference is a support to a circular saw and manual move (without electric motor) Thank you for the great idea!
Brother, you are a fabricating genius!!! Excellent build my friend.
👍Jay 👍 GREAT JOB!!!
Thank you very much :)
What gets me with all these wonderful projects is the high price of the material's used.
Just for a peace of 12x50x1meter 30 pounds.
Nice job.
Make the travel nut half cut, so you can move fast by hand to re-position. Overall: 9.9/10
Thank you for the advice :) Regards :)
You did a nice job. It looks like you made it with a channel to hold water. I have a small CNC plasma cutter and I put a water table under it and the water really helps to keep the steel cool. I mostly work with thin steel. It looks like it will work great for straight line cutting. At first I did not know how you were doing the track and basically it is just like my machine. Good idea; I can not cut a straight line by hand even if I use a guide. It looks like it took some time to make and I hope that it will serve you for a long time to come. 😀😀😀😀😀😀😀😀😎
I don't have words to express your talent. except awesome mate.
Thank you 😄
I have to admit, it's better than mine :D
Thanks: D Your better ;)
workshop from scratch nice job it turned out great! I have also seen Made in Poland plasma track, good work. Now you guys probably have not seen my plasma track but it’s also pretty neat, I went with a different approach, it works more like a chop saw with a back stop, and instead of moving the metal you can just move the cutting head from 90 to 45 and you can also tilt the plasma head, I wired up limit switchs as well. The video is called DIY plasma torch cutting track 👍 I got a smaller channel so it’s not had many views over the last year. Thanks for posting and making cool videos guys!
Macie identyczny styl. Już widzę oczami wyobraźni jakie rzeczy moglibyście tworzyć gdybyście razem pracowali, normalnie rozumielibyście się bez słów.
Czemu piszecie do siebie po angielsku?
@@karolmarcinek665 Nie mamy tylko polskich odbiorców, więc aby było dla wszystkich zrozumiałe to co robimy staramy się posługiwać językiem angielskim, który jest bardziej uniwersalnym językiem dla odbiorców, a nawet jeśli nie to w dzisiejszych czasach przetłumaczenie zdania trwa ułamek sekundy:) pozdrawiam
How about on all of the electronics a full descriptive parts/item/manufacture/where purchased list?
do so please
Ingenious, well thought out and inspiring. Well done and Thank you
Regards Dave
Thank you :)
Pretty impressive work, dude! Fantastic! 😮
Really well done!!! 😃
Thank you :)
I admire people that can think something like this through and make it become a reality
Красавец! Крутая идея, лайк!)
One word says it all QUALITY 👍
Thank you 😁
Very nice. I think I would add some limit switches, but otherwise a very useful tool.
add another axis, sensors and make a cnc out of that! it looks awesome!
When it comes to CNC, I need to train myself a bit :) Thank you :)
Nice idea and good work ! 👍 👍
Thank you 😁
Хорошая мысль, завтра сделаю
Сделал?
Great work, can you tell me whether you did anything beyond black spray paint on the rails to get that powder coated look?
Просто нет слов - одни эмоции! Все очень здорово получилось! Спасибо!
That is a great build excellent designing hands-down the best I’ve seen. Where did you get your threaded rod &And your guides?
Great Job on the design and execution of your idea! I like the reused drill motor for the gantry drive. 😎😎😎
I could not be sure but did you make the speed adjustable to cut at the best speed for different thicknesses of metal?
Thank you. a rotation regulator is mounted, thanks to which I set the feed speed to the thickness of the material :)
Beautiful project!
Thank you :)
Parabéns irmão pelo trabalho!!!!👏🏼👏🏼
Отличное исполнение ,буду себе такой же делать.👍
ten człowiek jest geniuszem!!
Dzięki 😁
Класс. А еще на регулятор скорости метки нанести соответствия толщины металла и оптимальной скорости коретки.
Классная установка получилось. Молодец. Направляющий профиль 30-й ?
GREAT JOB!!!👍
Great idea !
Is that a 775 12vDC motor ? How did you attach it to a drill chuck ?
Very creative work
👍👍👍
Thank you :)
@@WorkshopFromScratch
Just add 2 limit switch
👍👍
good work, but dont speed up your video, play it at normal speed make you look more professional
Nah. If he did not speed it up, then the video could have been an hour long lol.
Just play the video at 0.5 speed if you want to see it slower.
Thank you for your great videos! Where do you got the thread rod, the bearings and the posthole driller? Cheers!!
Internet
Смотрю ради кайфа от звука молотка! И сварочный звук не плох!))) А рельс с кареткой можно купить.))
Perfect!!! Amazing job
Good job,would like to have one myself. Do you guess on were your cutting line is or have a measuring method.
Отличная работа, ты реально крут чувак!
Wow!! I understand most of the build but how are you turning on the torch ???
That's what he plugged in to the hand peice he bypasses the trigger and mounted the off on to the panel.
Correct me if I'm wrong please.🤔
Does it work with plasma cutters that don´t have pilot arch?
Also a complete wiring diagram for the beginners.
HI GREAT WORK, but what is the little box you put in there to control the speed and direction, I love yours as it runs off 110v or 230 v
Good job .. i would like if you put the links of some items which you are using
Концевые выключатели надо поставить. Или на редукторе шуруповерта убавить момент затяжки до минимума
Молодець.Золоті руки.дякую.
How useful is a one axis cutting table? Ok, you can make straight cuts better then with oxy/ace.
But can you control a straight cut well, which ends in the material? Like the material has a width of 100cm and you only need a 20cm piece.
Only thing I would personally change is the all-thread and get more travel speed with less motor rpm. That rig could easily be cutting way faster.
Very professional! Are you building these machines for your own shop or for resale? What country are you from? They are so professionally build and finished, all new material, wow!
Thank you :) I build machines because I like to build, and thanks to the UA-cam platform I can show you the whole construction process :)
Très jolie travail, je pense que vous avez les compétences pour fabriquer une CNC.
Thanks man this is very helpful ❤ I want to make one, but I'm afraid there will be a gap between the iron rod and the bearing.what do you think bro? Can I replace the ones sold in the market with these?
БРАВО !
МОИ АПЛОДИСМЕНТЫ !
Nice work...very creative
Thank you :)
Excelente trabajo amigo, lo felicito!!!
Good Luck bro
Con ganas Perfecto !!! Muy util para diversos cortes seria genial hacer una como un tipo pantografo !!! Hacia los 2 ejes
👍👍👍отличная работа
I assume this is a high frequency plasma cutter? I read somewhere that low frequency ones don't work with cnc's
Very neat great job
Mass produce I'll buy it. Lol. Quality work. 👍
Thanks :)
Cool stuff! 👍
que rodamientos usaste? 6000?
a windshield wiper motor would work very well also, 5 amp pwm with reverse at amazon to control motor is less than $10.00 good vid thanx
What are the materials that you used and how did you do to make your lazer cut from that box and how did you connect it hehe
Great stuff. I've never used plasma cutter before. What are the most used cases where you would use Plasma cutter more often?
Most metal that dan not be cut with Oxy/Acl gas for example stainless steel,copper, aluminium.
Can not
@@petrusliebenberg3915 thank you
Well done 👍☺️
Thanks :)
Keep Up The good work :-)
Good job 👏
Вы сделали половину ЧПУ станка. Осталось немного.
A można wiedzieć jakie wymiary ma profil stalowy po którym jeździ ten wózek i jakiej średnicy są łożyska?
Very nice😎👍
Do you design first or just improvise?
If your going to go that far should have just made a full cnc plasma table
I tried that slider style and it didn't work! The
1 1/4" x1 1/4" square tube was slightly too narrow for a tight fit between the bearings no matter what i did ? I used exactly what it looks like your using for all the material. Maybe your washers are thinner then mine which are 1/16" thick, but where whould i find thinner washers ive looked!?
You might try fender washers or shims....
Use linear rails and bearings ballscrews as well cheap on Bangkok ect.
언제 보아도 감동 ... 희망입니다
Do you have the parts and material list also a blueprint I would love to make this myself
Use your eyes and brain everything he uses can be estimated this is why there's no one talking.
the broken drill, was it 12v or 18v? Thanks.
12 v
@@WorkshopFromScratch Thanks!!!
Не подскажите что за подшипники использовали для коретки? внутр. 10 внеш 22 примерно?
Do you have plans or drawings for this project? Like the cut list for the tubing and flat stock.
I have no plans, but when you decide to build, write to me and I will give you the dimensions :)
Jak się sprawuje tą tasmowka ładnie tnie? Kąty trzyma? Polecasz? Jaki to model.,
Jasne że polecam jestem z niej bardzo zadowolony, Cormak BS 128hdr, kąty trzyma wiadomo że po wymianie taśmy trzeba kalibrować ale wydaje mi się że tak jest w każdej pile taśmowej :)
Dobra robota 👏👍😁
So next step is CNC cutting machine :)
Does the plasma have pilot arch?
Yes, this plasma has a pilot arc
Добрый день, здорово смотрится. Основная труба-квадрат какого сечения? Спасибо
do you have a technical drawing of the machine
Witam,
robi wrażenie, chciałbym sprawić taką dla siebie, czy mają Panowie jakieś plany/rysunki, czy też spis zwymiarowanych elementów?
Хороший станок👍
Parabéns pelo vídeo. Mais infelismente nem todos brasileiros tem acessos as ferramentas que você usou para construir. 😭
Ganz Genial !!!!!! einfach Klasse 👌👌😎👍👍👍👍😉
Danke :)
Great idea thank you
Чувак что это такое, что это, мы не знаем что это такое, всё ровно держи лойс
Мы лойса не держим)) Мастерам достаточна сама идея!))
Estimado espectacular su trabajo
Puede publicar las medidas atento a comentarios
Saludos
If two 'stop' buttons are placed at the ends of the rail, the problem of having to watch for the end of the mechanism's travel is solved.
Limit swtches
Welche rohre benutz du?
Exelente bro asi se hace esta a otro nivel sooooolo bueno te felicito buentoque
How do I buy this product ?
So good😆👍👍👍👍
can you tell me what type of motor did you use?
The motor comes from a 12v cordless screwdriver.
hi i want to do the same but have 18 volt motor from old dewalt can you say me what power controler motor power i need and what power supply 18 volt ? my tool have 250/300 watt ! thank you for answer !!
Good job
Amazing
nice job
Да у этого мужика золотой цех. не у каждого такие инструменты есть.
Ну да посмотрел сегодня пойду сварганю.Зачем такое выкладывать если у 99 % народа в наличии дрель болгарка и тески и то не у всех мать вашу
Этому чуваку просто можно станки выпускать.
I am impressed.
Thank you :)