How to Replace Rear Brakes 1999-2003 Toyota Solara
Вставка
- Опубліковано 20 лип 2024
- Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS00889
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 1999-2003 Toyota Solara.
Check here for more videos on the 1998-2003 Toyota Solara • Toyota Solara 1st Gene...
This process should be similar on the following vehicles:
1999 Toyota Solara
2000 Toyota Solara
2001 Toyota Solara
2002 Toyota Solara
2003 Toyota Solara
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 12mm Socket 1aau.to/oa/1AXAA00015
• 14mm Socket 1aau.to/oa/1AXAA00015
• 21mm Socket 1aau.to/oa/1AXAA00043
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels 1aau.to/oa/1AXSS00035
• Rust Penetrant
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
Subscribe: / @trq
Check out our playlist:
Toyota Solara 1st Generation 1998-2003: • Toyota Solara 1st Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
If you plan on keeping your car for a long time .... this video explains the right way to change brakes
My 02 has drum brakes on the back
My 2002 has compound rear brakes the drum brakes are used for the ebrake and then the regular pads are used for normal operation. First time I’ve seen both in one.
Thank you so much bro 😎.
If one could ask, please stop skipping the lug nut removal part. I really like the sound of the air gun lol.
Ok. I see.. the emergency brake handle pulls all the way up and doesn't really hold well at all. ; but when i look at the pads, they look alright. Is it because the e-brake is different from the regular brakes, right? So, if i take that little rubber plug out and turn that little adjuster in there , can i tighten the e- brake to make it more effective?
Also, i think i need to clean and lubricate everything because sometimes after driving, it smells like ive been driving around with the brakes on. Maybe something's hanging up? ; not disengaging correctly? (2001 solara)
Thank you for doing these videos.
- Jesse
Except you skipped over showing the process of cleaning the mating surface.
They replaced the wheel bearing assembly. That's why the the mating surface looks new because it is new.