How to Replace Outside Door handle 96-04 Nissan Pathfinder
Вставка
- Опубліковано 28 лип 2024
- Buy Now!
New Exterior Door Handle Set from 1AAuto.com 1aau.to/ia/1ADHS01474
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off Exterior / Outside door handle. This video is applicable to the 00 Nissan Pathfinder
For More Info visit us at 1aau.to/h/Vj/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Thank you! These instructions worked well for my 2004 Frontier! I found that I did not have to disassemble the door much as you did - I was able to work around the window track and only peeled back the barrier fabric about 1/4 way. Cracked the old handle after an ice storm glazed the doors shut this past winter. Followed this video as a guide of what to look for / where on the Frontier. Love that I only needed a Phillips head screw driver, a pry bar and a 10mm socket to do it all! Took all of 20 minutes. Thank you, again!
Great video. Couldn't have done it without your help. Just needed how to put the window channel back into place as you didn't include that in the reinstall.
Great instructional video! Worked perfectly on a 99 pathfinder. Give this man a raise! Extra kudos for explaining the bracket attached to the outer door handle bolt - I didn't see it and was wondering where in the heck it came from?! Also, dont forget to reinstall the window guide before resealing the vapor barrier (small potatoes).
Excellent job. Thank you. The best DIY vids on You Tube. Concise and to the point with great camera coverage!
+Sir Miles Thanks for the feedback!
Great video. I have a 98 Pathfinder that is in perfect condition. Besides the broken handle. But after watching this video I’ve decided to sell
This has got to be the most uselesz comment on all of youtube
Says the guy commenting on the most useless video on UA-cam
I used this to change the handle on my 2004 Xterra, worked perfectly. Thank you so much!!!
Thanks for the vid. Worked great !!
Thanks 1A Auto, huge help cheers👍🏾
Thanks for the video, just bought a handle from you out of appreciation.
Thank you. Just saved me $411 dollars and a few hours time at the dealer, minus the price of your trim kit and the handle.
FWIW: I had a speaker, hood, and fuel door switches. The speaker stayed in the door, and the other switches came out with the door panel.
I didn't take the inside handle off
Awesome video! Thanks for sharing!!!
Should you disconnect the battery negative cable first?
Thx super great video!!
My Pfinders handle broke right off during the winter. Piece of junk plastic handles.
I just wish Nissan didn’t make it so that it’d take a lil over an hr to replace a stinkn door handle.
Thanks again! Great vid!
Got a video like this for a 2005 3rd gen Pathfinder?
My locks are fine and I can open the door from the inside but not the outside of my door.
+@krazytyler3366 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
@@1AAuto Thank you!
Anyone know if this same process would apply to 2002 Nissan Xterra ? do they have same design?
+masjoun We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task.
Yes!!just worked on my husbands door handle and that what he has. Unfortunately, the rod is missing. Gonna hit you the local picknpull to see if we can get our hands on one. Your comment was a year again did you ever attempt the replacement?
Very helpful video. One omission, though. The video didn't show how to re-install the window channel after the door handle was in.
+Timothy Holland Thanks for the feedback!
That's nice if I was asking for a 2000 but I was asking how to replace one on a 1993 outside door handle
I’ll leave it broke my lord that’s a bunch of bs
How is this OUTSIDE door handle? This is the inside handle...complete opposite of what I needed and what the title of the video states.
+Tim Smith Thanks for checking us out! In order to gain access to the outside door handle, you must go through the inside in order to get the mounting bracket off to remove the handle itself. 1AAuto.com
You obviously didn't watch the whole video haha
Awesome vid! Thank you. Was able to follow it for a 02 Nissan Xterra. Knocked out the hatchback door handle as well. Don’t know why they were made so flimsy. Way to easy to break but at least the replacement process is much easier