Freaking sweet ! I like that simple way of making good leather sheaths . Sometimes you can over think it when making sheaths, wasting time and leather .
Amazing work. Reminds me of an expert flintnapper I saw once. A hunter, desiring three identical (size and weight) stone arrowheads, for an future deer hunt. It is hard enough to make one from good Edwards County chert, but when he was through there was a set of triplets. Weight was within a few grains and the edge faces were razors.
Hi Richard, here is my website where the knives are available makencreate.net, shipping is free. If you'd like additional info on the knives you can send me an email to makencreate@outlook.dk Thank you
Ser sgu godt ud ven! Har du prøvet at lave nogle sakse før? Er frisør så det kunnet være fedt at se, bruger flere tusinde på en enkelt saks, og får den slebet til den ikke kan mere
Nice work, but $320. I could send that design to a blade Smith Nepal, & including shipping too Ireland have that in a week for $80 total, and they make knives with very few modern tools. Not putting your skills down or your years of doing it. But $320 for, what a 4 ½ inch blade. Come on. That's a steep. $150 at most. You do realise if you braugh your prices down, everything on your website would be sold out. Which is beet everything sold out, at a reasonable price, or a full website with over the top prices. I bet there's a ton of people who would love to buy any of your work & I've looked, and they look fantastic, until the see the price tag. I got two 10.5" Khukris & two 5 5" bushcraft knives, one of each had water buffalo handles & two with wood handles. 5 days $370 all in, too my door.
Bit more on the pricey side as bog oak is a very expensive wood. However I'll be making some budget ones soon of the same design for about half the price :)
I miss the older style of video you used to make, new stuff misses so many steps, can't see the metal due to camera histogram blowing out the picture so badly it's just a gigantic glow. Not sure why the change but the newer videos are much less enjoyable to watch compared to old stuff like the Skyrim dagger or even the folded axe from 6-8 month ago.
If you're interested in a knife similar to this one but a bit more budget friendly, very similar ones are now up at makencreate.net. Thank you!
bin gerade über deine webseite gestolpert, feine arbeit!!! deine preisangaben sind inkl. steuern und die währung ist dänische kronen?
@@axt_messer_survival Thank you. No. Canadian dollars.
@@MakeNCreate canada OK, dann wird der versand nach europa massiv teuer
@@axt_messer_survival I'm in Denmark so it's fine.
Tool Worthy !!! Absolutely Beautiful work . Bless you for showing your talent without a single word
Thank you mate!
And this is what you call a masterpiece
Average really, his tattoo is a masterpiece though 😜
Thank you very much :)
I really like these. Just about as simple as it gets, but will out perform anything else.
Couldn't have said it better myself, thank you liam :)
great video. thanks for sharing with us. greetings from turkey.
You're very welcome, thank you for watching :) greetings from Canada!
Freaking sweet !
I like that simple way of making good leather sheaths . Sometimes you can over think it when making sheaths, wasting time and leather .
Your work does your ancestors proud. Very well done indeed. No detail left unworked.
These are outstanding knives...still use the one I was able to get my hands on the last time they went up for sale...keep up the great work
Thank you Todd. Glad you like it :)
Beautiful, all three. If I were to guess, I'd have to say groomsmen gifts.
Always impressed to watch you temper by color in the forge. Skill, for sure.
Superb workmanship, exquisite in the simplicity of their design.. A masterpiece of tool craft elegance.
Thank you for the very kind words :)
Muy bonitos cuchillos.
Se nota que te gusta trabajar el cuero y la forja. 👍👍
OOOO BABY A TRIPLE
Nice work bud as always
Thanks mate :)
They look great. I have some hang ups about a handle without some mechanical attachment though. Epoxy (probably is but) doesn’t seem like enough
A good working knife is versatile, simple and reliable. As always, excellent and professional work! 👍🤝
Couldn't agree more :) thank you man!
Outstanding workmanship!
Very nice work. I have two hand made knives and they’re my favorite knives.
Brilliant Job Mate Love the final finish of the Overall Knifes 👍
Beautiful work. You can tell the glue you use on the cable. Grateful.
Glue !! That's it !! Money or art, one or the other.
Beautiful knives. Loved the bevels. Leather sheath look cool👍👍🔥🔥
Thank you!
Kæft et godt stykke arbejde. Bliv endeligt ved med det fantastiske arbejde.
Mange tak skal du have :)
I have to admit tattooing a tape measure on your arm is genius
Hey bro, i am from Russia🇷🇺, so good video, like like like like!!!!!!! Master !!🔥
Thank you man:)
Nice job, and too interesting blacksmithing tool.
20:42 this thing Eats wood like no ones business realy Great job Could you make a pipe tomahawk 👍👏
Indeed it does, 36 grit belts rock! Definitely, been wanting to make one for a while :)
@@MakeNCreate Great man looking forward
Great job brother.. like your works
They look amazing!
Nice work bro 👍😊
Thank you mate :)
Awesome knives
Great attention to detail!
Thanks :)
Impeccable work
Best vidéo of making knife 👏
Amazing work. Reminds me of an expert flintnapper I saw once. A hunter, desiring three identical (size and weight) stone arrowheads, for an future deer hunt. It is hard enough to make one from good Edwards County chert, but when he was through there was a set of triplets. Weight was within a few grains and the edge faces were razors.
Always wanted to try getting into flintknapping, done some very basic shapes but never any arrowheads. Thank you mate :)
@@MakeNCreate It is an art, reading stone. I tried and failed, but as well as you read steel, you should do OK.
Excellent knife! Very nice!
Thank you very much :)
@@MakeNCreate you are welcome :)
I love your stuff man! Since your in Canada now, you should make a Montreal pattern axe!
Thank you man. Sounds like an idea ;)
Wonderfool! Gretings from Montenegro!
Отличная работа!
Nice job dude, there some good looking knives
Thank you very much!
Great vid!
Thank you!
Excellent! 👍👍😉
Amazing knife
Thank you!
Nice. Good temper.
As an Scandinavian i do aprove :)
Dansk?
@@MakeNCreate svensk :)
Good stuff bro.
Hi , nice work! But i would like to know , what coal do you use ? :)
Looks like an old hickory forge hammer too...
an amazing job!
Thank you!
Nice work
hi quick question what the powder you put in the epoxy?
Excellent and looks fantastic and the finish. Thank you. I am interested in buying one for your knives. How do I contact you.
Hey all the information can be found in the description, homepage, email, social media etc :) have a great day.
Hi Richard, here is my website where the knives are available makencreate.net, shipping is free. If you'd like additional info on the knives you can send me an email to makencreate@outlook.dk
Thank you
That swage has been become a very well used chisel plate.
It's been way before I started using it haha :)
@@MakeNCreate Oh, for sure. I mean, if you see a swage with a perfectly clean spot on it that isn't used it's going to become a chisel plate!
Nice work. ;DDD ♥♥♥
Powered forged, pneumatic hammers. What are we in the future or something?
Yes ;)
Ты сделал красивые ножи
COOL
I want the one with his hair on it...
good job
Thank you!
Can you make a shovel? :3
Wow hope it will b given away
Nice death grips shirt
Ser sgu godt ud ven! Har du prøvet at lave nogle sakse før? Er frisør så det kunnet være fedt at se, bruger flere tusinde på en enkelt saks, og får den slebet til den ikke kan mere
Mange tak :) lavede nogle meget små middelader agtige sakser men ikke et par moderne. Projekt til fremtiden :)
@@MakeNCreate Fedt! Hvis det bliver til noget produktion engang køber jeg gerne ;)
Ok but can it *baton*?
I know it can, just gotta ask lol
Do you do custom work and if so could I send something for you to incorporate in my blade
Sure thing. Send me an email and we can talk further :) makencreate@outlook.dk
goog
where can i buy your knives at what is your website?🤩🤩🤩🤩
Makencreate.net :D
Du skulde prøve at smede en sgian achlis det ville være fedt men godt arbejde 👍
Laver en sgian dubh inden så længe i traditional stil da jeg har moseeg nu :) tak skal du have!
Qyero compra uma faca dessas,como faço, endereço
How much do you want for this knife? ;P
Price is on my website :) makencreate.net
@@MakeNCreate 😉
Did you change shops?
Yes i did. I moved to Canada so I'm renting myself a spot in a very nice shop :)
ah yes soumi knives
How i can buy that
Right here! makencreate.net
Красава
Nice work, but $320. I could send that design to a blade Smith Nepal, & including shipping too Ireland have that in a week for $80 total, and they make knives with very few modern tools. Not putting your skills down or your years of doing it. But $320 for, what a 4 ½ inch blade. Come on. That's a steep. $150 at most. You do realise if you braugh your prices down, everything on your website would be sold out. Which is beet everything sold out, at a reasonable price, or a full website with over the top prices. I bet there's a ton of people who would love to buy any of your work & I've looked, and they look fantastic, until the see the price tag. I got two 10.5" Khukris & two 5 5" bushcraft knives, one of each had water buffalo handles & two with wood handles. 5 days $370 all in, too my door.
This knife must be very expensive.
Bit more on the pricey side as bog oak is a very expensive wood. However I'll be making some budget ones soon of the same design for about half the price :)
@@MakeNCreate good luck to you in your work!
Hola cómoHola cómo te llamas hola cómo te llamas hola cómo te llamas
I miss the older style of video you used to make, new stuff misses so many steps, can't see the metal due to camera histogram blowing out the picture so badly it's just a gigantic glow. Not sure why the change but the newer videos are much less enjoyable to watch compared to old stuff like the Skyrim dagger or even the folded axe from 6-8 month ago.