Hammerhead Mudhead / GT80 Drive Belt Replacement Instructions

Please see an instructional video for replacing a drive belt on the Hammerhead Mudhead buggy. The process will also be very similar for the older Hammerhead GT80model.
Basic tools required:
1 x rubber mallet or similar
Cross head screw driver
8mm socket or spanner
13mm / 14mm socket or spanner
**Very Important**
The drive belt has a flat edge on one side and a slightly tapered (angled) edge on the other side.
When fitting the new drive belt, ensure that the flat edge is fitted so that it faces away from you on the engine side.
It is easy to feel for the flat / tapered edge if you run your fingers gently along the edge of the drive belt before it is fitted.
Should the belt be fitted incorrectly it will wear down VERY quickly!

[@kingdanielbeatsz3403]

What's the belt numbers?

[@big4932]

The belt when I put it on is rubbing against the side at the top what should I do?

[@storm_buggies]

Please email us a video and we can take a look. Please also ensure that you are using a genuine replacement belt. Thank you.

[@MSJHTJohnson]

How do you tighten/loosen/adjust the belt? Thanks!

[@StormBuggiesUK]

There is no adjustment on the belt.

[@Droplip]

Saved my life this video. Thank you!

[@tommywimberly8379]

Can you make video of how to change the oil?

[@coffey1718]

THANK YOU!!!!!!!!!!!

[@donrobinson5662]

Excellent video!!

[@JoseGonzalez-ig4do]

How can know the year or my hammerhead go cart?

[@stormbuggies4975]

If the go kart is a genuine Hammerhead product it should have a VIN plate. If the year is not on the VIN then the supplying dealer should be able to confirm the year by checking the VIN. Hope that helps and have a great weekend.

[@garyburbank8895]

Same torque Converter they use on the Manco Dingo Buggy same setup they use on Honda Oddeysee FL350 same setup they use on The Polaris Ace , RS1 , RZR

[@pullupboy5463]

Thanks for video brother

[@matthewgilbert8273]

Thank u!

[@BillyRay501]

What’s the part number for the bely

[@storm_buggies]

Hi, The part number for this item is - 9.110.018

[@BillyRay501]

Thanks buddy

[@antoniaolivas6843]

what kinda belt did u use

[@stormbuggies4975]

West Olivas - We use the standard 725 belt from Hammerhead.

[@bell30012]

Just what I needed to make this job simple. Thanks for the video.

[@stormbuggies4975]

Southern Dad - Thank you for your positive feedback! If you get a minute, we’d be very grateful if you also left us a positive Google review for Storm Buggies 😊

[@PedroHernandez-yz2ip]

Where can I order from

[@StormBuggiesUK]

Storm Buggies UK!