How to Replace steering column clock spring on VW Golf 2016 and coding control unit using AutelUltra
Вставка
- Опубліковано 2 жов 2024
- PROCEDURE:
1). Back up the coding from old steering column control unit (steering clock spring).
2). Ignition on and disconnected the battery negative terminal.
3). Remove the drive side airbag with pulling two metal clips behind the steering wheel through the open area.
4). Remove two connectors for airbag.
5). Straight the steering wheel and remove the M12 bolt.
7). Mark the steering wheel and column with marker or puncher.
8). Then remove the steering wheel.
9). Remove both steering column trims.
10). Remove the steering clock spring connectors.
11). Remove the T20 three bolts and take out the steering clock spring.
Dónde estas ubicado
Hi is Autel MX808 Bi-Directional Control Diagnostic Tool a good scanner to do the data back up thank u
Hi Ayman, Thank you for the message. I have to honest with you. I have only experience with Autel Ultra diagnostic scanner. On this tablet I have done many data backup for coding on bmw, audi, and Mercedes. They work pretty well. I believe ms808 has same functionality. It’s good idea to check with Autel dealer or website before buying it.
Thank you
Hi, why do you backup the codes? Why not just replace the clockspring and then wipe the errors? I’m not a car person so I don’t understand
Cheers
Hello With which program can the cruise control be activated for the passat b8 trendline? I think vcds is not enough for this job
Hello, in my 2015 tiguan, the little metal part goes down but it stays there and it doesnt come out
Hi, I want to replace my normal steering wheel with a multifunction steering wheel. my gateway is the right model ( is it a high model). Can you hel me to undersand if I have to change also the steering control unit?
I'm sorry I haven't done that before. Thank you
Great job for the clock spring replacement, what autel diagnostic model are you using?
Thank you for the comment. Autel ultra
Hi great vidéo, i have a question. I have a 2016 tiguan. I did not undestand the coding part. Is IT mandatory to do that ?
Thank you for the info.
Very good thank you
Welcome 😊