DJI RC Antenna MOD - NO drilling/cutting etc. ALFA APA-M25
Вставка
- Опубліковано 1 тра 2024
- LINKS BELOW!
DJI RC Antenna modification, replace two standard antennas for two directional ALFA Network APA-M25. The modification uses only existing holes to route the antenna wires for external Alfa antennas.
DJI Mini 3 Pro
Bracet STL file: www.thingiverse.com/thing:660...
Antenna wire (10cm RP SMA Female to U.FL IPX) pl.aliexpress.com/item/328061...
Antenna 2x Alfa Network APA-M25 www.amazon.com/Alfa-APA-M25-d... - Домашні улюбленці та дикі тварини
LINKS FOR PARTS IN DESCRIPTION
Great mod! Clean!
Do you perhaps know how to change the batteries? I cannot find any information whatsoever anywhere on this. Thanks!!
If you’re asking about the battery in an RC controller, it’s quite easy. The batteries are connected by small plugs, so you simply need to disconnect them. The plugs are under small black pieces of fabric 1:44. After that, cut the wires from the old battery and solder them to the new one. You can purchase cells with pre-welded nickel plates for easier soldering, similar to the ones available here: tinyurl.com/bdhkfej7. The original battery has a capacity of 2600mAh.
@@moskil2 Thank you! I did open the RC. There are 2x 18650 2600 mAh 3.6V batteries with special connectors. So no special controllers. Batteries can be switched between each other so they are not paired to the BMS and could be replaced I think. But DJI has a bug there and they must know about it. If you have an issue with quick battery drain (despite RC 1 year old), when you disconnect the batteries at 0%, they show around 70%...you drain them back to 0%, disconnect again and they show around 25%...you repeat that around 3 more times until they are really at the lowest and the RC cannot be turned on. You charge them back to 100% in 3 hours (took around 30 minutes before) and they last as new. This means they get, after some time, discalibrated and the BMS is not able to get proper 1 - 100% limits. This information is not mentioned at any of the forums yet.
Hello, I would like to purchase alfa network apa-m25+bracket. Please give me the purchase link.
There are links in description, u can buy all stuff and print bracket.