How To Install A SAAS Pillar Pod With Gauges!
Вставка
- Опубліковано 5 січ 2018
- Hey Everyone in this video I show you how to install the SAAS pillar pod with Gauges going through the install to a working unit.
Check out my Store on 4x4 Camping And Adventures www.bonfire.com/store/4x4-cam...
/ 4x4campingandadventures
4x4campingandadventures@gmail.com
Subscribe for more great how-to videos
Want me to review your gear well send it to.
PO BOX 1869 Esperance w.a 6450
Att 4x4 Camping and Adventures - Авто та транспорт
My power wire (2015 MN) was in the same place but it was Red & Black.
You can tap into the light wire in the lower dash panel just above the power socket/Cigarette lighter for illumination. It only works when you switch on the lights.
There are a couple of good earth points, one is the fuse rack bolt on the left side of the fuse rack & there is another just below the right hand pillar & behind the kick pannel (it's the easiest- just a 10mil bolt.
Ordered the same SAAS pillar mount today. Keen to Chuck it in the ute. Boost gauge & Volts to monitor the duel battery setup 🤘
Thanks for sharing, I was just looking to add that same (Nissan) SAAS pillar pod to my car so very helpful to see how it looks. Also, I was wondering where I was going to get into the ign wire - remove shroud and go from switch! Cheers mate.
Love your videos brudda i dont own a triton but enjoy your videos i own an nm 3.2 turbo deisel pajero 👍
+RT Skinner same brand mate 😂😂 its all good Im glad you like them.
True im looking at fitting an egt gauge soon but Will have to tap out probe hole as i got the stock Mitsubishi exhaust
+RT Skinner yeah mate pretty easy to thought should be simple
Bloody brillent when installing my own, made it easy. Now i have got to install a snorkel in my mn. Lol hit me up if you want to do it cause i sure as shit have never do it lol. On the serious note i need to get to the blanks to put the switch in for my spotties and the plastic isnt coming off. Any tips?
Looking forward to the battery setup, cheers.
Steve Slese its going to be a good one mate!
Hi, I have a problem with my boosts gauge, it rising really slow when I step on the gas. I followed every procedure like u did on this video 😞
G’day mate, where did you connect you positive and negative wires to? Straight to your battery or did you tap into something in your dash ?
What colour wire is the lights for the numbers just hooked up mine and the numbers don't light up
Esperance for the win :)
Your Vid is well explained,think im going to add a gauge like that to my L200. Whereabouts you live looks nice ?
Bunbury now mate this video was recorded in Esperance thanks for watching mate
Hey mate where about did you put the oil pressure gauge bolt?
Hey mate. I Teed into my vacuum line on my 2016 Dmax and my needle actually goes backwards. What did I do wrong? I have the SAAS 20 psi diesel boost gauge.
Thx mate
Hey mate did you have a boost controller?
Does this work if you have srs air bags in
What glue did u use?
Only thing is the elec tape round the heatshrink 😂 but everyone does things differently, you could’ve gone a bigger piece of shrink around all the connections you soldered up and covered for neatness
thanks for sharing just wondering where about's diid you put the vacuum hose?
Hey mate a Tee piece off the Maf line
Good ‘how too video’. You say “obviously” heaps!
+retry tobuy yeah mate I noticed that bit of a nervious thing infront of the camera or when im thinking on my toes I resort to using that word. Thanks for watching and being a long time subscriber mate!
It’s all good, Iv just got back from 3 weeks camping, 4x4 & fishing and now I’m home catching up on all the UA-cam videos. Keep up the good work 👍🏻
Is this a TD Triton? When getting boost gauge for a diesel does it have to be a certain one?
It is a turbo diesel mate you don't need anything specific just one with out a vacuum you just want a straight boost gauge.
Hi, good video, where did you get your dash carpet from? Joe
Hey mate it came with the car.
4x4 Camping and Adventures must be an Australien thing we don’t get them over here , but could do with one with this French sun! Ta. Joe
would this gauge work well on a D4D 3.0L Toyota Hilux?
It sure would mate.
hey mate, I fitted the same saas boost gauge today. It only is reading 5 psi at 2000rpm when sitting in the garage. would there be any difference if I was to actually drive the car? it just doesn’t seem right to me. the reason why i’m asking would the reading be different is because I can’t test drive the car at the moment as it’s in bits and I need to put half the car back together haha!
+Connor Chiarelli what kind of car is it mate
4x4 Camping and Adventures D4D 2007 Hilux
+Connor Chiarelli seems right to boost but while sitting still it should not read much if anything mate.
4x4 Camping and Adventures thanks for the reply appreciate it. i’ll try get the car back together tomorrow and give it a test drive and see if hits around 15
+Connor Chiarelli it should crack 15 being the standard pressure
Where’d u get the pillar mount from?
EBay mate
is the column universal fit? or is there different columns for differnt cars from SAAS?
Yeah they do mate
Nice why not show where the illumination wire is
How come the boost needle appears really jumpy? Is it that bad in real life or does the video just make it look that way? Cheers
Might be the video mate it's normally pretty smooth but it does spoke to 25 then regulates to 18psi
4x4 Camping and Adventures have you got a big turbo?? 25psi seems incredibly high for standard turbo or is that norma on Tritons? Good video btw 👍
It's the normal on tritons to spike like that the wastegate brings it back to 18psi which is max psi from factory
You said “obviously” 48 times.
I’ll do better next time