I remember seeing one back in 1974. It was sitting on the pier next to the ship prior to deployment. Looked like a fiberglass turtle. Amazing machines these are. Always wanted to build one. Back then I couldn't afford to.
Knowing my luck first 20 seconds i drop this drone in the water my propeller will cut the wire and the drone will just sink to the bottom and I call it a day
Which you say "The cord" is a umbilical cable for underwater ROV or drone . Most ROVs require a cable to transfer the mechanical loads, power, and communications to and from the vehicle. Remotely operated underwater vehicle (ROV) is a tethered underwater mobile device. The load-carrying umbilical cable is used along with a tether management system (TMS). The umbilical cable is an armored cable that contains a group of electrical conductors and fiber optics that carry electric power, video, and data signals between the operator and the TMS. So, if the cable is broken than its not working.
It is possible to make a system where the drone will resurface if no signals are received, by dropping the ballast weights. You could expand on this concept by making this system a mechanical piece, perhaps a spring loaded timer, that is periodically reset by the computer. If the line is cut or the on-board battery runs out, the timer will run out and actuate the weight release mechanism.
@@davidbergaragonzalez5653 - Theoretically, yes. Realistically, no. Commercially we use fixed weights to ballast a ROV either positively buoyant (climbs unassisted) neutral (stays at its current depth) or negatively buoyant (sinks - slowly). If we need large weights lifted, we use variable buoyancy (but with a fail-safe to dump the excess air, unless we are working inside a platform jacket). Workclass ROVs are expensive - easily £1 million plus for a bare ROV. With a host of sensors fitted - this can easily exceed £2m. Even smaller 'Eyeball' ROV systems are expensive. Saab Seaeye Cougar for example costs upwards of £250 000 for the ROV alone. Therefore they are insured. The insurance companies give us procedures to work to. This is backed up by good practices and rules by I.M.C.A. - International Maritime Contractors Association. This includes making the ROV negatively buoyant the majority of the time, so that it sinks. Why? Two fold. Primarily - If the ROV has been maintained correctly, then fully charged transponder and responder location beacons will be fitted to the ROV. This allows us to fix the ROV's location on the seabed for retrieval at a later date, more than likely by another ROV. Secondly - If the ROV is working from a vessel (as most commercially do), if the ROV is positively buoyant and the tether has parted - for whatever reason - or if the ROV is dead due to a major electrical fault - there is a real risk of the ROV floating into the host vessel's thrusters. If you know anything about surface vessel Dynamic Positioning D.P. - and how close these ROV support vessels get to oil platforms, well it doesn't take Einstein to work out the dangers of the ship losing positional control and colliding with an oil platform. If we have to make a ROV positively buoyant (very powdery seabed that reduces visibility for example) - we need permission from our head office - who then seek approval from the insurers. We then have to risk assess the hell out of the work procedure to ensure everything is safe. One other reason to make an ROV positively buoyant is if we are working in waters beyond the ROV's depth rating (I can't think of any reason to do so, there is nothing to survey or inspect at a midwater depth of 7000m). If we lose an ROV where it can not be rescued by another ROV, then we would ballast the ROV to climb, albiet slowly, using the ROV's locator beacons to monitor its position relative to the host ship, or any other ships nearby, All projects are different, as are subsea conditions. Part of my job is finding out the local conditions and setting up the ROV so that it can operate efficiently and safely, with no risk to personnel, equipment and wildlife.
Remotely Operated Vehicle - not Submersible Underwater Drone. ROVs have been used in oil and gas industry for well over 20 years, inspecting and surveying oil platform structures as well as the pipelines that carry the oil to shore.
@@silverfox5089 Water conducts electricity, so it attenuates radio waves. Besides, you want a cord to retrieve your $2000+ equipment when something goes wrong, like a power failure.
After researching all these underwater drones the best on for your money is the Gladius underwater drone then the PowerRay. Wouldn't waste my money on they other 3 even at a 10th of the listed price.
How comes, the OpenROV Trident isn't mentioned ? That's at least a project, that is nearly about to ship and already 2nd generation, while most of these seem unproven new starters.
I think it's for the same reason we don't call others drones "planes" or "helicopters" : there is nobody inside. So as a plane without a pilot, those are submarines without a pilot. I think so
ZedlOptima - Sorry, but it's just an ROV. I've been working with them for 11 years now - Saab Seaeye systems as well as workclass. Calling an ROV and underwater ROV is like calling Phantom 4 an Air Drone. Der Bleifuss - ROVs also use ballast systems (variable buoyancy on workclass systems), as well as adding and subtracting weights to make the 'sub' positively, neutrally or negatively buoyant.
I did and it looks nice but I don’t fish so none of the fancy fish finding things matter to me. I do boat inspections and searches for items dropped in the marina. 10 years Dive Master and 40 as electronics tech so my expectations are unreasonable.
are radio waves not work underwater? Why are they all wired? Feels like these wires will easily get stuck on some coral or sea weed and then have fun recovering it without scuba gear...
Underwater ROVs and Drone,s are linked to a host ship by a neutrally buoyant tether or a load-carrying umbilical cable is used along with a tether management system (TMS). The TMS is either a garage-like device which contains the ROV during lowering through the splash zone or, on larger work-class ROVs, a separate assembly mounted on top of the ROV. The purpose of the TMS is to lengthen and shorten the tether so the effect of cable drag where there are underwater currents is minimized. The umbilical cable is an armored cable that contains a group of electrical conductors and fiber optics that carry electric power, video, and data signals between the operator and the TMS. Where used, the TMS relays the signals and power for the ROV down the tether cable. Once at the ROV, the power is distributed between the electrical components.
It's downside is when the cable from the transmitter to the underwater drone gets tangled or stucked thru corals/water lilies/ tree branches etc. under the water.
Kind of funny that they tout them as fishing aids, and I didn't see a single fish I'd want to eat. But to stock an aquarium... a really big aquarium... sure.
Wow! the gladius uses aluminium oxidation treatment to ensure waterproof...You mean you have anodised the aluminium...That and the cheesy low cost rendering into videos would put me of straight away.
unless you have a cable capable of going deeper than than the empire state building in depth then the ocean will still be very much unexplored lol. None of these drones are shown going very deep.
@@LieorDie24 We have cables that expand across the globe so cable length isn't an issue. ROV's shown in the video are the lowest of the low. They would be considered toys. Work class ROVs are the larger, multi-million dollar systems that easily carry 10,000m (Meters) of tether (cable). source: professional in the industry...
What's with the addiction to smartphones/tablets. I would think a dedicated controller/viewscreen would be much better. That's the way the big boys roll.
They lied about the forst toy!!! They sad that it travels 2m/sec that is =7200km/h ro 4473mph Well that would ve inpresive for a military jet in the air but a underwater toy would disintegrate at that speed... Does someone guarantee that it can go 100m underwater cause im not shure about that eather considerong it being made from plastic. If there is a guaranty that and sell it in america they will be borke soon the judge can arange for that if they stick to those statments misleading the public...
Thumbnail is misleading. I was interested in the green one just to waste 13 minutes and not actually see what I was looking for. Keep your stuff relevant and not misleading. Plus can't compare something that's not even out.
Dear Sir, This thumbnail I used in this video it is 'Aquabotix' underwater ROV,s photo. It is no 2 in this video and its features start on 7.07 min. You can see that. Please try to understand Sir.
You know there is something wrong with these videos when they show you the same exact footage from 2 different drones videos
I remember seeing one back in 1974. It was sitting on the pier next to the ship prior to deployment. Looked like a fiberglass turtle. Amazing machines these are. Always wanted to build one. Back then I couldn't afford to.
How do I get the fathom underwater drone
Please send me a link to a summer I can get underwater drone for my children to have fun with
Knowing my luck first 20 seconds i drop this drone in the water my propeller will cut the wire and the drone will just sink to the bottom and I call it a day
So how does it work in a strong current?
Do they float if the cord is broken ?
Which you say "The cord" is a umbilical cable for underwater ROV or drone . Most ROVs require a cable to transfer the mechanical loads, power, and communications to and from the vehicle. Remotely operated underwater vehicle (ROV) is a tethered underwater mobile device. The load-carrying umbilical cable is used along with a tether management system (TMS). The umbilical cable is an armored cable that contains a group of electrical conductors and fiber optics that carry electric power, video, and data signals between the operator and the TMS. So, if the cable is broken than its not working.
Use of same promotional videos detected 1:16, 5:30
I would like see if they can test then with lava ocean entry at kapoho bay
underwater drone
If something breaks the line, can the drone float and be retrieved?
Depends if you have made the ROV negatively or positively buoyant - by adding or subtracting weights.
It is possible to make a system where the drone will resurface if no signals are received, by dropping the ballast weights. You could expand on this concept by making this system a mechanical piece, perhaps a spring loaded timer, that is periodically reset by the computer. If the line is cut or the on-board battery runs out, the timer will run out and actuate the weight release mechanism.
@@davidbergaragonzalez5653 - Theoretically, yes. Realistically, no.
Commercially we use fixed weights to ballast a ROV either positively buoyant (climbs unassisted) neutral (stays at its current depth) or negatively buoyant (sinks - slowly). If we need large weights lifted, we use variable buoyancy (but with a fail-safe to dump the excess air, unless we are working inside a platform jacket).
Workclass ROVs are expensive - easily £1 million plus for a bare ROV. With a host of sensors fitted - this can easily exceed £2m. Even smaller 'Eyeball' ROV systems are expensive. Saab Seaeye Cougar for example costs upwards of £250 000 for the ROV alone. Therefore they are insured. The insurance companies give us procedures to work to. This is backed up by good practices and rules by I.M.C.A. - International Maritime Contractors Association. This includes making the ROV negatively buoyant the majority of the time, so that it sinks. Why? Two fold.
Primarily - If the ROV has been maintained correctly, then fully charged transponder and responder location beacons will be fitted to the ROV. This allows us to fix the ROV's location on the seabed for retrieval at a later date, more than likely by another ROV.
Secondly - If the ROV is working from a vessel (as most commercially do), if the ROV is positively buoyant and the tether has parted - for whatever reason - or if the ROV is dead due to a major electrical fault - there is a real risk of the ROV floating into the host vessel's thrusters. If you know anything about surface vessel Dynamic Positioning D.P. - and how close these ROV support vessels get to oil platforms, well it doesn't take Einstein to work out the dangers of the ship losing positional control and colliding with an oil platform.
If we have to make a ROV positively buoyant (very powdery seabed that reduces visibility for example) - we need permission from our head office - who then seek approval from the insurers. We then have to risk assess the hell out of the work procedure to ensure everything is safe.
One other reason to make an ROV positively buoyant is if we are working in waters beyond the ROV's depth rating (I can't think of any reason to do so, there is nothing to survey or inspect at a midwater depth of 7000m). If we lose an ROV where it can not be rescued by another ROV, then we would ballast the ROV to climb, albiet slowly, using the ROV's locator beacons to monitor its position relative to the host ship, or any other ships nearby,
All projects are different, as are subsea conditions. Part of my job is finding out the local conditions and setting up the ROV so that it can operate efficiently and safely, with no risk to personnel, equipment and wildlife.
can any of these handle the strong current of a river??
that fish throw tho must be an experienced fisherman 10:42
Use fishing drone
ZedIOptima your reply makes no sense
😂😂lol
Why did we sundenly start to call RC submarine drones???
Submersible Underwater Drone
Remotely Operated Vehicle - not Submersible Underwater Drone. ROVs have been used in oil and gas industry for well over 20 years, inspecting and surveying oil platform structures as well as the pipelines that carry the oil to shore.
The English language changes all the time.
TheJonasz27, these days anything that doesn’t have a heartbeat & moves without a person physically touching it, is a drone.
can't you provide any link at the least
DERPY RAGE they cant provide a link because they arent sold online ive looked
damn
8:30 blue is my favorite color
could somebody tell me why is there always a cable attached on those drones ?
wireless doesn't work underwater
Why ?
Its a tether, you will get bad if any connection underwater, trust me I've built a few ROV's and wireless isn't an option
@@silverfox5089 Water conducts electricity, so it attenuates radio waves. Besides, you want a cord to retrieve your $2000+ equipment when something goes wrong, like a power failure.
Great video!
Hi! Thanks for the review. But would you like to try FIFISH P3? I heard that it has very good specs.
Yes, Fifish is a very good fishing drone
Wow!
These things are SO cool!
I like seeing drones of all kinds in action!
Cool, good job👍
Same videos? Nice testing!
Thanks
I bet all of you
*its made in china >:D*
Justin leenard Maglantay
*_IS MADE IN CHINA_*
Good!
Well, as long as it works, I'm good!
Bingo. if you want to see some real underwater drones (ROVs & AUVs), then have a look at ROVplanet.
Hey CCROV, why not a 360 cam setup? Your teams approach looks like a great platform for 6 cameras.
After researching all these underwater drones the best on for your money is the Gladius underwater drone then the PowerRay. Wouldn't waste my money on they other 3 even at a 10th of the listed price.
What's the name of the drone in the thumbnail?
How comes, the OpenROV Trident isn't mentioned ? That's at least a project, that is nearly about to ship and already 2nd generation, while most of these seem unproven new starters.
OpenROV is also a very good underwater drone or aquatic drone or fishing drone
Everybody wants money for nothing. These days, selling an actual product is old-fashioned integrity.
CCROV = 3200 dollars lol hopeless.
why is it called an under water drone instead of a submarine
I think it's for the same reason we don't call others drones "planes" or "helicopters" : there is nobody inside. So as a plane without a pilot, those are submarines without a pilot. I think so
Generally submarine can carry man
Also it is called underwater ROV
Besides, submarines dive using ballast systems and not just vertical thrusters.
ZedlOptima - Sorry, but it's just an ROV. I've been working with them for 11 years now - Saab Seaeye systems as well as workclass. Calling an ROV and underwater ROV is like calling Phantom 4 an Air Drone.
Der Bleifuss - ROVs also use ballast systems (variable buoyancy on workclass systems), as well as adding and subtracting weights to make the 'sub' positively, neutrally or negatively buoyant.
Nice stuff just wish you had links for the sites
I think a lot of these drones are still in development and you cant get them yet.
I liked the first one the best. Second had good ideas. Have to build my own I guess.
Can you check the last one ?
I did and it looks nice but I don’t fish so none of the fancy fish finding things matter to me. I do boat inspections and searches for items dropped in the marina. 10 years Dive Master and 40 as electronics tech so my expectations are unreasonable.
Did you build yet?
are radio waves not work underwater? Why are they all wired? Feels like these wires will easily get stuck on some coral or sea weed and then have fun recovering it without scuba gear...
Underwater ROVs and Drone,s are linked to a host ship by a neutrally buoyant tether or a load-carrying umbilical cable is used along with a tether management system (TMS). The TMS is either a garage-like device which contains the ROV during lowering through the splash zone or, on larger work-class ROVs, a separate assembly mounted on top of the ROV. The purpose of the TMS is to lengthen and shorten the tether so the effect of cable drag where there are underwater currents is minimized. The umbilical cable is an armored cable that contains a group of electrical conductors and fiber optics that carry electric power, video, and data signals between the operator and the TMS. Where used, the TMS relays the signals and power for the ROV down the tether cable. Once at the ROV, the power is distributed between the electrical components.
No... Radio waves do not work well underwater
Do you have to have a cell phone signal?
Why are all of them tethered...? Aren't there any wireless solutions?
Underwater Drone or ROV has the cable (which you tethered) because this cable has tpms function, which is very important .
Credibility shot for #5 & #3 both using the same footage.
Waaw, is amazing
How much are they?
Thx for this interesting video !
You guys rock.!!
So what happens when the string snaps?
Exploring the World with John its a tether
Charlie Bleeker oh
is it just me, or do these drone just seem like bait?
Kkkkkkkkkkk
500 metre range? what about under water?
more like 1 metre
What about the ibubble?
2:03 turtle: HIGH FIVE!!
Thanks
How we can change the batery?
Please contact underwater drone company which you own
It's funny they used the same footage for 1 and 3
You know in Finland the waters are green and all you can find is pike, so it's kind of useless here!
Sea Ray rov are nice.
It's downside is when the cable from the transmitter to the underwater drone gets tangled or stucked thru corals/water lilies/ tree branches etc. under the water.
Underwater drone or ROV need a cable for better performence
Stucked? Really?
Minecraft Sponge Block?
Is that you? 5:03
The commercial drone's weaknesses is not exploring water, so these might be mainstream soon.
Kind of funny that they tout them as fishing aids, and I didn't see a single fish I'd want to eat. But to stock an aquarium... a really big aquarium... sure.
Now make one you can go thousands of feet down with and has super bright lights that'll surely help with ocean exploration.
Those have been around for over 20 years!
Lol! Is that an underwater selfie stick???
Yes, Underwater selfie stick is exists
Yes it is 🤣
Is that even a thing
Yes, is good but I don't like to wait 2 months for receive it
it need s too go 1000 feet down too be of any use
I want one of the water Drome
Ok,water drone
Hi sweet channel ☺ Keep it up!
Thanks friend
Wow! the gladius uses aluminium oxidation treatment to ensure waterproof...You mean you have anodised the aluminium...That and the cheesy low cost rendering into videos would put me of straight away.
you just take other people's videos and put your name on it?
unless you have a cable capable of going deeper than than the empire state building in depth then the ocean will still be very much unexplored lol. None of these drones are shown going very deep.
100 meter is deep a underwater drone which goes 1000 meter of depth would not be afforable i guess
I can't tell if you are trolling? Because literally nothing you said was true.
@@claytonharbin1151 What is not true im saying?
@@LieorDie24 We have cables that expand across the globe so cable length isn't an issue. ROV's shown in the video are the lowest of the low. They would be considered toys. Work class ROVs are the larger, multi-million dollar systems that easily carry 10,000m (Meters) of tether (cable).
source: professional in the industry...
Spiderfly The Trident can go up to 100m down. I think that’s sufficient for exploring lakes and reefs and whatnot.
hola excelente video me gustaria que permanezcan haciendo este contenido!!! Voy a continuar mirando sus creaciones. Les envio un abrazo chau ❤️👍🏽
Wtf AquaBotix is Sold Out
Aquabotix underwater drone
Can you just stick a go pro on a fish?
Vid is dope, but why in my recommended
Interesting, if it weren't for the umbilical cord. Find another transfer technology then were in Business.
The umbilical cord is a very much important part of a underwarer ROV or Drone.
Why not make rc submarines like real submarines with a ballast tank.
Underwater drone or ROV is better
Number one only 30 meters?? You kidding me!!
What's with the addiction to smartphones/tablets. I would think a dedicated controller/viewscreen would be much better. That's the way the big boys roll.
This video is joke ! No one of these ROVs could stand even 0.5 knots of current flow....
01
They lied about the forst toy!!!
They sad that it travels 2m/sec that is =7200km/h ro 4473mph
Well that would ve inpresive for a military jet in the air but a underwater toy would disintegrate at that speed...
Does someone guarantee that it can go 100m underwater cause im not shure about that eather considerong it being made from plastic. If there is a guaranty that and sell it in america they will be borke soon the judge can arange for that if they stick to those statments misleading the public...
Oooooo
Hope, It,s will Help You
Sao giog enten õ tren wa
All cool but don't like the cord
5 and 3 have the same footage with the turtle
he just put some commercials together...wow
i have a idea!
Idea about underwater drone and ROV?
Thumbnail is misleading. I was interested in the green one just to waste 13 minutes and not actually see what I was looking for. Keep your stuff relevant and not misleading. Plus can't compare something that's not even out.
Dear Sir, This thumbnail I used in this video it is 'Aquabotix' underwater ROV,s photo. It is no 2 in this video and its features start on 7.07 min. You can see that. Please try to understand Sir.
Why do these Videos always have this nerve racking music ? Jesus
One of the inventors of #4 is Ron from Harry Potter. Sweet. Sign me up
Aquabotix cost 6000$, sax
tethers suck, why not use sonar a weak sonar will do the job without a tether. or super long wave infrasound
not good enough for video
You need at least 20MHz of bandwidth to send video, so you at least need a tether to the surface.
Idk how long a meter is im american i understand feet
Please convert meter to feet, 1 meter is equal to 0.3.28084 feet
@@ZedIOptima That's too many decimal points.
CCROV really 100 meter depth that would be great if its not a joke
PUT NAME, PLIS😊
*please
*pls
Horrible flashbacks of corded game controllers... Plz get sony/microsoft to help...
how much 2 no dron
how much too lern engrish ?
You'll float too
*THEY ALL FLOAT DOWN HERE!*
-Pennywise the Clown
OMG GLAD E US
Sibiu Nano on Indiegogo
If the drone is for underwater...at least make it streamline not a box...geeez
Toy for adults?
maybe tie hooks to the drone to fish with that would pop off and go to fishing rodwonder how long before a drone gets eaten by a shark
Has a wire.
is this waterproof? lol
Vic Malz I don't think it is 😂👍
Yes, These are all underwater drone and underwater ROV, Aquatic and fishing drone also
no it flys the wings are hidden lol
Vic Malz god
transformer leg identify
CCROV Only $2k lol
Cool
They rediscovered jesus!
beautiful yellow drone under
water camera. saleem love
Karachi .08-06-2017
Not much info and really pretty boring video just a bunch of visual commercials, but not so bad if you mute the stupid music!
cool