Thanks man this videos saved me a ton of money, I went to the mechanic thinking it was a transmission issue he tells me “yea i see transmissions go bad all the time on these cars” and went on to try and charge me an arm and a leg to fix it I had no clue about anything car related. I look up the codes my cars throwing on google an somehow landed on this video these were the exact things my car was doing so I looked up the throttle body for my car and ended up changing it myself with 4 easy to reach bolts all for 118$ thanks again I really do appreciate the people like you in this world who teach people rather than hate keep to scam people
Thank you for the video!! I believe my throttle body is brand new but I just washed my engine, And everything you described in your video is what's happening to the car now.
@JesusFreak_247 at a "self wash" Places, I've wash the engine before, (I think that was screwed up the coils Last time), Generally, it's okay to wash off your engine, But you're supposed to cover certain things, I didn't do that this time.
@@kornaguilar4718 I use to do that with my Elantra 2008 and one day after washing it getting out from work it hesitated to go up in a small hill to second gear, so I push gas pedal to get to the light but has to keep pushing in other to stay running, then go on freeway. once I get home, I used my tool to get a code, when to google and walla, remove second spark plug coil and found wet, remove spark plug and wet. I had a set of brands new and installed. Problem fixed. ---From that day, I never did engine wash again.
Thanks for the info. My 2009 Nissan Altima does not have symptom 1 (engine light: no). Symptom 2 yes, hesitation to move, intermittently. It's been doing this off and on for about a year now. Symptom 3: no-no rough idling; Symptom 4 no, no stalling; Symptom 5: no, no going into limp mode; Symptom 6: no, it always starts just fine. So, my 2009 Altima only has symptom 2. Thanks again.
But did u get it figured out?? Same boat here and guess what? 14’ Maxima. It’s usually after I’ve driven a while. And all this shyt started with a misfire in cylinder 4 lol Let me kno fam!!
Thanks for the info and the sponsor. I cleaned the throttle body and replaced the gasket for my 2018 chevy cruze but still got the check engine light and the reader said it was the gasket. Any thoughts on?
Thanks for sharing this informative video about bad throttle body symptoms! Your explanations were easy to understand and I now have a better understanding of how the throttle body works and where it's located. The symptoms you discussed were helpful to identify potential issues and when to replace the throttle body. Keep up the great work!👍
I cleaned throttle valve and it's still losing power with esp error, should i change whole throttle valve? These errors came on diagnostic p012200,p022200,p307a00.Thanks!
Dude my car just had this problem like I drove the car for about 1 km to the gas station and then I filled petrol and start the car but the engine was revving itself in that condition like there was not even need to press the accelerator to pick up the vehicle just release the clutch and it will work like I have pressee the accelerator later on the same thing happened when I reached at my destination and turned on the car after 2 hours then I did was I popped the hood and poured some water on the engine block and you know that water evaporated which means the engine was overheated.
I had the same symptoms after cleaning the throttle body. It was revving randomly when put in park for a minute. Also car lost power randomly. I fixed it by replacing the throttle body. If you want to clean the throttle body, use a rag instead of spraying directly. Problem arises after spraying directly into the throttle body.
I got a 1990 Honda Civic DX it's a program fuel injection I've seen where people press the butterfly valve and it rotates a mechansm where the TPS goes mine doesn't rotate mine is like stuck
Hey there. Did you do a throttle body re learn after cleaning it? I had this same issue causing the traction light to come on and going into limp mode. I bought a good OB2 scanner and performed a relearn. Now it’s running great.
2013 Ford Fusion: So a check engine light flashed onto my dash after the car stalled a few times but still had power..( Minutes before I had just filled my tank). Anyway, I was able to drive it to my mechanic who I've never had a problem with. He kept it over night, then called and said he had clean my throttle body, which he said was stuck open and that everything was fine. He charged me $145 and I thought everything was fine. That was Tuesday. I drove it hope which is only 3 blocks from my house. So I go to Walmart yesterday (Friday) which is about 8 blocks from my house and the same things happened but worse. This time car stalled, NO Power , a WRENCH light is on and one of the AIR BAG lights is on. I tried to drive it a few more times but same problem stalled, no power, wrench light, air bag light. I parked it for the night. So my question is: Is it possible that the mechanic just cleared the Code for the check engine light and charged me the $145? or Was cleaning the throttle cable a temporary fix and He really should have replaced it? Was it something else and my driving it caused more damage to the transmission, emission system or engine as a whole? Why the heck would one of the air bag lights suddenly come on? I took it back so I'm waiting for a reply I just wanted some opinions. Thanks.
I have the same problem and I as well have 2013 ford fusion and also the wrench comes on my dash as well but I thought it was the throttle body but I’m not sure either I went to a for dealership they say they cover it unless they run a diagnostic first which is $160 but if nothing comes up after they done it there’s nothing they can do. But I honestly think it’s a internal issue with car tbh
Just took one off a 02 buick century with about 270,000 miles and it was very dirty and gunky and had all these symptoms I've replaced 02 sensors coil pack ignition module spark plugs and wires tps sensor IAC valve and map sensor so hopefully this solves the issue
I have a 2015 nissan pathfinder code p0101 came up 4 weeks ago. I was told it's the MAF sensor. I replaced that and the air filter. One week later the engine light came back on for the same issue so I replaced it again and reset the computer. I now have a rough idle and same code. I notice that my plate on throttle is rusted around the edges. Is it possible that the throttle body is bad and causing the MAF circuit code??
Electronic Throttle Body(ETB) Is it supposed to open when trying to start the engine or stay closed? My ETB is staying closed when I’m trying to crank my car.
Thank you. Finally I found out why my car keeps misfiring after having had two tune ups. The throttle body went bad. Even after a cleaning it still kept sticking.
I've been having the random misfire code for months and all of these issues. Replaced spark plugs. EGR valve (recommended by a mechanic) still. I accidently left the throttle body sensor unplugged and now my car running better than ever. A bit confused by all this...
my 2016 Kia Sorento has this issue and is currently in the shop now. fortunately it's covered under a warranty I purchased with the car. the engine light came on and it's in a "limp/home/reduced power" mode which made driving on the highway super dangerous
Thank you for this!!! My vehicle has been acting up off & on for 2 years now. Nobody can figure out what’s wrong because it doesn’t do it consistently so the dealership never sees it. I am wondering if it’s occasionally getting stuck on the open or close. Usually it stops idling low and rough when we push the gas while it’s in park.. maybe that’s forcing it to open?
Okay, I know Im really late to this video, but my 2016 Jeep Wrangler Unlimited has stalled on me while driving twice in the past two days. The electronic throttle control light stays on during a safe start. In the video he says it happens while stopped, but its happened while reversing once and accelerating another time. Any and all advice is appreciated
Can please help me i have a audi Q7 2007 3.0 tdi diesel the car is cranking but no starting it only starts when i press gas pedal or i give electricity I opened the throttle body and he doesn’t close it’s opened all the time please help me I don’t know what to do
Can a TB cause shaking only at idle. My car runs smoothly but shakes at idle. As soon as I press on the gas my car zooms. Never had any stalling or surging or even the perception. My TB plate looks almost as clean as new (shiny all round), I still sprayed TB cleaner several times to be sure. Rough shake hasnt gone. My idle at the stop light is below 1k(~650 rpm) and consistent. Happened only one time, when I pressed on the gas hard to make a fast turn at the signal from stop, my etc light came on and my car seemed to go into limp mode. I turned the car off and on and problem hasnt recurred, have even pressed hard on the gas several times at a stop to make a turn, no issues since. Randomly my car takes a couple starts to start, cranks every time. I also have a rich LTFT ~-12.5% at the stop in drive (always -12.5%). Fluctuates fine when driving. STFT always close to zero. In park LTFT ~ -22%. Can it still be the throttle body or TB sensors?
Hi, my audi a4 b7 intermittently goes into limp mode only when slowly accelerating from a stop. Car doesn't go into limp mode at cruising speed. When light turns green i just lightly pressed on the gas pedal and it goes into limp mode. There are no check engine light or codes. Any help would be greatly appreciated. Thanks
Started my car after a few minutes months of the year not driving it. Put the car in reverse and pressed the pedal but nothing happened. Decided to press a little harder and the car accelerated so hard. Put the car back in drive and it accelerated so fast without touching the pedal. I put the car back in park. Now each time I start the car, the engine is revving high like it wants to accelerate on it's own. What would cause that?
What if i cleaned the tb and after a few months now the lightning bolt light cane on dashboard. Now car wont turn on so im debating whether its needing anew throttle body or a new fuel pump.
I cleaned the TB and it didn't make any differance. 9 months later the engine would turn over but not fire. Changes the fuel pump and it fixed both issues. A week later the car runs, but the TB symptoms are back. Going to replace the Throttle body today and hope that it fixes it for good. Driving in heavy traffic with the revs dropping out all the time is a nightmare. It must be fixed. Ill let you know how I go..
2011 Ford Fusion SLE with a 3.0 Liter. While driving the wrench light comes on and the motor goes into a rough idle. Pull over and turn the car off and the problem resets till you try pulling out again. Bad Throttle Body example here
Was it like your engine was audibly running, but the car was moving at a dead crawl? Kind of like it goes into limp mode? I have the same issue currently.
Mine gets stuck for some reason at certain times when you repeatedly press the gas pedal. It fixes itself once in a while, but sometimes you have to shut off the engine and once again start it, but it still pops up. Pretty sure, it’s the problem of a throttlebody. It’s old, I have cleaned it, but it doesn’t help.
I'm having this problem with my car when Im at a full stop at a traffic light and just letting my car idle out my steering wheel will shake and the car its self would shake and jerk, and all of a sudden when I accelerate my steering wheel would stop shaking, and my car would jerk or feels like it is going to die out even burbles coming out from my muffler, but when I fully step in gas pedal the car would run normal when I accelerate fast.
hopefully someone could help, but i have a dodge charger 2007 5.7 hemi and when i enter 2nd gear the car starts shaking from moderate to heavy. even when coming to slow stop to make a turn (on a street) it shakes a bit. i normally take my foot off the gas and press down again until it goes away.
Ok so I got a 16 Genesis coupe 3.8 and any suggestions would be appreciated. But I have a P0507 code popping up at idle it bounces slightly from about 900 to 950 if that but when I drive and it is manual but say I just pop into neutral and start to coast or come to a stop the rpm’s drop to about 900 then rev up to 2000 then right back down. I checked for vacuum leaks clean multiple sensors around the intake and throttle body cleaned the throttle body twice and nothing. I think it’s the throttle body but it doesn’t have a lot of build up even when I cleaned it first any ideas
On my way home from a karate tournament this weekend. My 2015 Ford Taurus limited went into limp mode and the wrench light came on. I could barely move. I pulled off the highway. Restarted the car. Everything was fine about 10 minutes later. Same thing. Went through that three or four times. Finally just called for a tow. I'll find out in a little bit. What's wrong with it? Hoping it's nothing major
I’ve cleaned my throttle several times now. The first time I had a check engine light. The second time no check engine light. Now I’m having a crank but no start. Does a dying throttle body always give a code?
Hey there @yarymmot3931 I cleaned my throttle body and I did move the valve quite a bit to clean it as I didn’t disconnect it from the vehicle, now my engine light is on. For yours to turn off, did you completely removed the TB when you cleaned it? I saw somewhere that moving the valve too much can cause the TB to no longer work and need replacing… just seeing how I can fix this without spending $200
The computer is trying to read the tbs so it’ll act up and not send codes SOMETIME. It could be bad throttle bodies, that’s just what I pieced together with mine. Gonna swap them by tmrw and see what’s good
@@easyautofix Hello I have a 2007 Toyota Yaris, I have all the symptoms of a bad throttle body that you mentioned but with no engine light and it passed smog right away, can A car pass smog even if the throttle body is bad, or can it be that my problem is something else ?
Thank thank sm I just bought a new car n it started having issues less than a week 😂 I thought I bought a F… Up car but I scan my car n 3 codes came up P1233 (Bank 2) driver side throttle body, P1236 throttle control motor relay circuit open bank 2, P1290 throttle motor circuit short bank 2 I guess the last owner didn’t rlly took care of it so I been doing research n I guess the throttle body is going bad and I try to clean it but that didn’t do anything codes was still showing up n car still F… up so I order a use throttle body to test it out n see if anything happen or fixes hopefully it jus the throttle body
My truck was shaking and gave a cold start. I changed the spark plugz and fuel injectors and todat it went into limp mode I had no idea it would do that. Thanks for the vid imma clean it when im off work 👍
@@korbettetrillher5028 lol what a weird mechanic. Transmission don't need service except oil or part replacement but trans rarely do all that except when there's a problem along the intake component
@@korbettetrillher5028 I took out the oil from my 1996 it was gunk brown added some new atf volvine and has been working better 4Runner I was getting stuck at 30pmh wouldn’t go higher now it’s buttery smooth I just drained pan and added it back as measured but I will be cleaning the throttle body for maintenance
@@jameswhite1319I have a question 00 explorer. Sohc . I cleaned the throttle body and iac . It actually runs good starts right up. Once it get warm it starts to get sluggish kinda popping or shimmy s. Like wen I try to pass at 65 it goes but not like it should. And in traffic it's kinda idling funny no lights are on. Any suggestions
Thanks man this videos saved me a ton of money, I went to the mechanic thinking it was a transmission issue he tells me “yea i see transmissions go bad all the time on these cars” and went on to try and charge me an arm and a leg to fix it I had no clue about anything car related. I look up the codes my cars throwing on google an somehow landed on this video these were the exact things my car was doing so I looked up the throttle body for my car and ended up changing it myself with 4 easy to reach bolts all for 118$ thanks again I really do appreciate the people like you in this world who teach people rather than hate keep to scam people
Straight and to the point- no music of fluff. Top notch and thank you!
Facts straight to the point.
Rev up your engines!
@@memorandum740❤😮 0:27
@@memorandum740😂 yea i hate that channel!
@@kinglawrey8948 that's my favorite channel
Are you related to Chrisfix?
I was wondering the same thing
He sounds like him , I was thinking the same thing
Yeah trying to remain anonymous
😂
It is him
Thank you for the video!! I believe my throttle body is brand new but I just washed my engine, And everything you described in your video is what's happening to the car now.
@JesusFreak_247 at a "self wash" Places, I've wash the engine before, (I think that was screwed up the coils Last time), Generally, it's okay to wash off your engine, But you're supposed to cover certain things, I didn't do that this time.
@@kornaguilar4718 I use to do that with my Elantra 2008 and one day after washing it getting out from work it hesitated to go up in a small hill to second gear, so I push gas pedal to get to the light but has to keep pushing in other to stay running, then go on freeway. once I get home, I used my tool to get a code, when to google and walla, remove second spark plug coil and found wet, remove spark plug and wet. I had a set of brands new and installed. Problem fixed.
---From that day, I never did engine wash again.
Bro a year later and still helping Thank you - recently got a car and fixed alot and was told to check this part
I changed my throttle body, and I still get the "electronic throttle control" warning, so now I'm going to change my ECM and hope it fixes it!
what about an idle that is constantly fluctuating would that be a bad throttle body or ecm?
Alternator
Ever find out brotha? Cleaned tbs and having this issue
Check for sufficient fuel pressure, clean air filter & intake and check for leaking air to start with.
Thanks for the info. My 2009 Nissan Altima does not have symptom 1 (engine light: no). Symptom 2 yes, hesitation to move, intermittently. It's been doing this off and on for about a year now. Symptom 3: no-no rough idling; Symptom 4 no, no stalling; Symptom 5: no, no going into limp mode; Symptom 6: no, it always starts just fine. So, my 2009 Altima only has symptom 2. Thanks again.
But did u get it figured out?? Same boat here and guess what? 14’ Maxima.
It’s usually after I’ve driven a while. And all this shyt started with a misfire in cylinder 4 lol
Let me kno fam!!
Thanks for the info and the sponsor. I cleaned the throttle body and replaced the gasket for my 2018 chevy cruze but still got the check engine light and the reader said it was the gasket. Any thoughts on?
Accurate asf mine doing all these things
Could a dirty throttle body cause engine sputtering, rough idle and fast intermittent sputtering around 3rd gear or 3k RPM ?
Thanks for sharing this informative video about bad throttle body symptoms! Your explanations were easy to understand and I now have a better understanding of how the throttle body works and where it's located. The symptoms you discussed were helpful to identify potential issues and when to replace the throttle body. Keep up the great work!👍
I cleaned throttle valve and it's still losing power with esp error, should i change whole throttle valve? These errors came on diagnostic p012200,p022200,p307a00.Thanks!
This definitely has been happening for a few months now & im glad I came across your video. It was very informative & helpful. Thank you 💙💙
The symptoms can also be many many other things
@MASTERnotMECHANIC can be map sensor, throttle position sensor, idle air control valve..
Same problem like you had. No codes. Crank but no start. Press pedal and will start.
Excellent video
Hi, When i turn my truck off, i hear a clunking sound, what would cause that?
Thanks a lot.
How about extra revving when idling?
And excessive fuel usage?
Is the engine light on?
Dude my car just had this problem like I drove the car for about 1 km to the gas station and then I filled petrol and start the car but the engine was revving itself in that condition like there was not even need to press the accelerator to pick up the vehicle just release the clutch and it will work like I have pressee the accelerator later on the same thing happened when I reached at my destination and turned on the car after 2 hours then I did was I popped the hood and poured some water on the engine block and you know that water evaporated which means the engine was overheated.
I had the same symptoms after cleaning the throttle body. It was revving randomly when put in park for a minute. Also car lost power randomly. I fixed it by replacing the throttle body. If you want to clean the throttle body, use a rag instead of spraying directly. Problem arises after spraying directly into the throttle body.
@@tedwu9354listen to this guy💯 going through this with my 35hr
Tps sensor or idle air control valve
I got a 1990 Honda Civic DX it's a program fuel injection I've seen where people press the butterfly valve and it rotates a mechansm where the TPS goes mine doesn't rotate mine is like stuck
I’ve had a few of those symptoms and also having issues putting gas in my truck. It will keep stopping, when I’m squeezing the gas trigger.
I cleaned out my throttle body and replaced my MAF sensor and I’m still stalling when coming to a stop ?
Hey there. Did you do a throttle body re learn after cleaning it?
I had this same issue causing the traction light to come on and going into limp mode. I bought a good OB2 scanner and performed a relearn. Now it’s running great.
2013 Ford Fusion: So a check engine light flashed onto my dash after the car stalled a few times but still had power..( Minutes before I had just filled my tank). Anyway, I was able to drive it to my mechanic who I've never had a problem with. He kept it over night, then called and said he had clean my throttle body, which he said was stuck open and that everything was fine. He charged me $145 and I thought everything was fine. That was Tuesday. I drove it hope which is only 3 blocks from my house. So I go to Walmart yesterday (Friday) which is about 8 blocks from my house and the same things happened but worse. This time car stalled, NO Power , a WRENCH light is on and one of the AIR BAG lights is on. I tried to drive it a few more times but same problem stalled, no power, wrench light, air bag light. I parked it for the night. So my question is: Is it possible that the mechanic just cleared the Code for the check engine light and charged me the $145? or Was cleaning the throttle cable a temporary fix and He really should have replaced it? Was it something else and my driving it caused more damage to the transmission, emission system or engine as a whole? Why the heck would one of the air bag lights suddenly come on? I took it back so I'm waiting for a reply I just wanted some opinions. Thanks.
I have the same problem and I as well have 2013 ford fusion and also the wrench comes on my dash as well but I thought it was the throttle body but I’m not sure either I went to a for dealership they say they cover it unless they run a diagnostic first which is $160 but if nothing comes up after they done it there’s nothing they can do. But I honestly think it’s a internal issue with car tbh
@@jamescarter9444 He talked me into replacing it but it was very expensive. It worked but the engine is allot nosier than it used to be.
you hit every single problem that I have. I have to add that it only happens when I drive car hard and its hot.
Just took one off a 02 buick century with about 270,000 miles and it was very dirty and gunky and had all these symptoms I've replaced 02 sensors coil pack ignition module spark plugs and wires tps sensor IAC valve and map sensor so hopefully this solves the issue
My throttle dont open when u on car (not start), as it should n its stuck open a lil bit
I have a 2015 nissan pathfinder code p0101 came up 4 weeks ago. I was told it's the MAF sensor. I replaced that and the air filter. One week later the engine light came back on for the same issue so I replaced it again and reset the computer. I now have a rough idle and same code. I notice that my plate on throttle is rusted around the edges. Is it possible that the throttle body is bad and causing the MAF circuit code??
I have a mercedes w210 everytime i caharge throutal body its keeps brning its now 3times have charged them what could be the issue with the car?
Electronic Throttle Body(ETB) Is it supposed to open when trying to start the engine or stay closed? My ETB is staying closed when I’m trying to crank my car.
Closed, iac will supply air
Thank you. Finally I found out why my car keeps misfiring after having had two tune ups. The throttle body went bad. Even after a cleaning it still kept sticking.
Did u replace the TB?
I've been having the random misfire code for months and all of these issues. Replaced spark plugs. EGR valve (recommended by a mechanic) still. I accidently left the throttle body sensor unplugged and now my car running better than ever.
A bit confused by all this...
my 2016 Kia Sorento has this issue and is currently in the shop now. fortunately it's covered under a warranty I purchased with the car. the engine light came on and it's in a "limp/home/reduced power" mode which made driving on the highway super dangerous
What about the car turn off during idle and p0510
You're the best man literally
Are you from Brazil?
Isn't carburator cleaner not recommended to clean Throttle body cuz it might damage it?
I have a Chevy hhr can it be the throttle body or a vacuum leak
How can I get the car out of limp mode
My throttle flap is fully open. When can is stop. Not sure if it's normal.
Ford ranger 2.2L 2015 model
So when you start it and it’s above 2 rpm and then after idling it goes down what could it be
Thank you for this!!! My vehicle has been acting up off & on for 2 years now. Nobody can figure out what’s wrong because it doesn’t do it consistently so the dealership never sees it. I am wondering if it’s occasionally getting stuck on the open or close. Usually it stops idling low and rough when we push the gas while it’s in park.. maybe that’s forcing it to open?
And when you changed the throttle body and the gas pedal and still stops, what is the problem?
When I break my rpm goes up and my car revs do you think it’s a throttle problem. ?
Okay, I know Im really late to this video, but my 2016 Jeep Wrangler Unlimited has stalled on me while driving twice in the past two days. The electronic throttle control light stays on during a safe start. In the video he says it happens while stopped, but its happened while reversing once and accelerating another time. Any and all advice is appreciated
Electronic throttle body to ander se band hoti hai to usme kya problem ho sakti h meri under se ekdum sahi h ,kya new Leni chahiye?
If it makes a click sound could it still be the throttle body? Cause I replaced the starter back in September/November
Can please help me i have a audi Q7 2007 3.0 tdi diesel the car is cranking but no starting it only starts when i press gas pedal or i give electricity I opened the throttle body and he doesn’t close it’s opened all the time please help me I don’t know what to do
What about too lean have no vacuum leaks or nothing
Check MAF sensor or Egr valve. If not fuel filter. Try cleaning MAF sensor w cleaning or replacing the fuel filter.
Can a TB cause shaking only at idle. My car runs smoothly but shakes at idle. As soon as I press on the gas my car zooms. Never had any stalling or surging or even the perception. My TB plate looks almost as clean as new (shiny all round), I still sprayed TB cleaner several times to be sure. Rough shake hasnt gone. My idle at the stop light is below 1k(~650 rpm) and consistent. Happened only one time, when I pressed on the gas hard to make a fast turn at the signal from stop, my etc light came on and my car seemed to go into limp mode. I turned the car off and on and problem hasnt recurred, have even pressed hard on the gas several times at a stop to make a turn, no issues since. Randomly my car takes a couple starts to start, cranks every time. I also have a rich LTFT ~-12.5% at the stop in drive (always -12.5%). Fluctuates fine when driving. STFT always close to zero. In park LTFT ~ -22%. Can it still be the throttle body or TB sensors?
If my car goes into limp mode while I am driving, but never while at idle, is it more likely that it’s my mass airflow sensor?
I cant get mine to even open. Its stuck hardcore and i got no choice but to replace it or something... Got a 2004 toyota camry
Hi, my audi a4 b7 intermittently goes into limp mode only when slowly accelerating from a stop. Car doesn't go into limp mode at cruising speed. When light turns green i just lightly pressed on the gas pedal and it goes into limp mode. There are no check engine light or codes. Any help would be greatly appreciated. Thanks
Clear and to the point. Great video
Great to the point explanation. Is it better to clean it out, or replace that part on a 20 year old Benz that still runs good?
New is always better but if you are on a tight budget then cleaning could work.
Started my car after a few minutes months of the year not driving it. Put the car in reverse and pressed the pedal but nothing happened. Decided to press a little harder and the car accelerated so hard. Put the car back in drive and it accelerated so fast without touching the pedal. I put the car back in park. Now each time I start the car, the engine is revving high like it wants to accelerate on it's own. What would cause that?
What if i cleaned the tb and after a few months now the lightning bolt light cane on dashboard. Now car wont turn on so im debating whether its needing anew throttle body or a new fuel pump.
I cleaned the TB and it didn't make any differance. 9 months later the engine would turn over but not fire.
Changes the fuel pump and it fixed both issues.
A week later the car runs, but the TB symptoms are back.
Going to replace the Throttle body today and hope that it fixes it for good.
Driving in heavy traffic with the revs dropping out all the time is a nightmare. It must be fixed.
Ill let you know how I go..
2011 Ford Fusion SLE with a 3.0 Liter. While driving the wrench light comes on and the motor goes into a rough idle. Pull over and turn the car off and the problem resets till you try pulling out again. Bad Throttle Body example here
Was it like your engine was audibly running, but the car was moving at a dead crawl? Kind of like it goes into limp mode? I have the same issue currently.
Soo I have a 2013 Chevy Malibu Lt when I get to stop sign or a red light, my car turns off what can be my problem. Plz help me
Do you have the check engine light on?
Hi i have just purchased a throttle body.. something is rattling when i shake it does this mean its faulty?
It is the bypass throttle body
Mine gets stuck for some reason at certain times when you repeatedly press the gas pedal. It fixes itself once in a while, but sometimes you have to shut off the engine and once again start it, but it still pops up. Pretty sure, it’s the problem of a throttlebody. It’s old, I have cleaned it, but it doesn’t help.
How did you fix it ?
Reply this pls
I'm having this problem with my car when Im at a full stop at a traffic light and just letting my car idle out my steering wheel will shake and the car its self would shake and jerk, and all of a sudden when I accelerate my steering wheel would stop shaking, and my car would jerk or feels like it is going to die out even burbles coming out from my muffler, but when I fully step in gas pedal the car would run normal when I accelerate fast.
hopefully someone could help, but i have a dodge charger 2007 5.7 hemi and when i enter 2nd gear the car starts shaking from moderate to heavy. even when coming to slow stop to make a turn (on a street) it shakes a bit. i normally take my foot off the gas and press down again until it goes away.
Hello! I have the same car! It’s a beast! I would first check the ball joints!!!
Right on the money!! Thank you
What about an excessive crank to a weak start..
Hey man. Just subscribed! Can you make one about syptoms of a bad high pressure fuel pump?
Ok so I got a 16 Genesis coupe 3.8 and any suggestions would be appreciated. But I have a P0507 code popping up at idle it bounces slightly from about 900 to 950 if that but when I drive and it is manual but say I just pop into neutral and start to coast or come to a stop the rpm’s drop to about 900 then rev up to 2000 then right back down. I checked for vacuum leaks clean multiple sensors around the intake and throttle body cleaned the throttle body twice and nothing. I think it’s the throttle body but it doesn’t have a lot of build up even when I cleaned it first any ideas
I know it’s late but did you ever find out what it was? Could have broken the gears while cleaning. I have the same code
Getting a misfire at idle and at load when accelerating or pulling off from a stop. Cleaned my ethrottle body and its still doing it
It sounds like maybe coil , some get hairline fractures .
Are you ChrisFix?
No
Can you CLEAN the throttle body without disassembling it from the vehicle? Thank you 😊
Only to a point.
I cleaned mine and it did run better but I think the throttle body needs to be relearned because it still runs ruff but not as bad as it was
On my way home from a karate tournament this weekend. My 2015 Ford Taurus limited went into limp mode and the wrench light came on. I could barely move. I pulled off the highway. Restarted the car. Everything was fine about 10 minutes later. Same thing. Went through that three or four times. Finally just called for a tow. I'll find out in a little bit. What's wrong with it? Hoping it's nothing major
Throttle body is the problem
Had that wrench on my ford fusion change the throttle body work great
You didn't tell us how the tournament went
What bout the mass air sensonr some vehicles have it attached to it and cleaning doest realy do anything
What about super boggy
I’ve cleaned my throttle several times now. The first time I had a check engine light. The second time no check engine light. Now I’m having a crank but no start.
Does a dying throttle body always give a code?
Just go to a mechanic.
Hey there @yarymmot3931 I cleaned my throttle body and I did move the valve quite a bit to clean it as I didn’t disconnect it from the vehicle, now my engine light is on. For yours to turn off, did you completely removed the TB when you cleaned it?
I saw somewhere that moving the valve too much can cause the TB to no longer work and need replacing… just seeing how I can fix this without spending $200
The computer is trying to read the tbs so it’ll act up and not send codes SOMETIME. It could be bad throttle bodies, that’s just what I pieced together with mine. Gonna swap them by tmrw and see what’s good
U helped a lot thank you sir
and thank you sir!
Would it cause my car to not start on the first try
It always starts but only after cranking it a few times
Great straight to the point video
Thank you!
@@easyautofix Hello I have a 2007 Toyota Yaris, I have all the symptoms of a bad throttle body that you mentioned but with no engine light and it passed smog right away, can A car pass smog even if the throttle body is bad, or can it be that my problem is something else ?
The video is very helpful with me
Thanks 🙏
Glad to hear that!
My car is throttling heavy n It shut off while driving
I'm going to try this tomorrow
Chris fix it!
Intriguing video
Great video thank you
very nice, thank you!
good video. i wasnt sure but now im sure
Thank you!
THANK YOU! 🎉
and thank you!
Thank thank sm I just bought a new car n it started having issues less than a week 😂 I thought I bought a F… Up car but I scan my car n 3 codes came up P1233 (Bank 2) driver side throttle body, P1236 throttle control motor relay circuit open bank 2, P1290 throttle motor circuit short bank 2 I guess the last owner didn’t rlly took care of it so I been doing research n I guess the throttle body is going bad and I try to clean it but that didn’t do anything codes was still showing up n car still F… up so I order a use throttle body to test it out n see if anything happen or fixes hopefully it jus the throttle body
Thanks!
and thank you!
great video
Alldata will show you just up to where you actually need experience to know wtf uoure dojng
My car is running at 4k rpm idle praying this is the cause
thanks
and thank you!
My truck was shaking and gave a cold start. I changed the spark plugz and fuel injectors and todat it went into limp mode I had no idea it would do that. Thanks for the vid imma clean it when im off work 👍
Did it work? I changed the same parts and my truck started going into limp mode
awesome!!
You are awesome!
This helped a lot thanks happy it’s just a throttle body
90 percent of the time, its the plastic gears under the black cover get damaged,i have taken many apart after replace them the plastic gears go bad
Can it cause the Transmission shift points to act funny
Yes
I had the same issue, mechanic told me I need to service my transmission
@@korbettetrillher5028 lol what a weird mechanic. Transmission don't need service except oil or part replacement but trans rarely do all that except when there's a problem along the intake component
@@korbettetrillher5028 I took out the oil from my 1996 it was gunk brown added some new atf volvine and has been working better 4Runner I was getting stuck at 30pmh wouldn’t go higher now it’s buttery smooth I just drained pan and added it back as measured but I will be cleaning the throttle body for maintenance
@@jameswhite1319I have a question 00 explorer. Sohc . I cleaned the throttle body and iac . It actually runs good starts right up. Once it get warm it starts to get sluggish kinda popping or shimmy s. Like wen I try to pass at 65 it goes but not like it should. And in traffic it's kinda idling funny no lights are on. Any suggestions
Thanks for the video, my only gripe....
It's revolutions per minute.
Not revolutions per minutes.
Singular, not plural.
That's Chris's brother
Thank you sirrrrr I love u rn 🥹
90% of the time you can clean it it’s easier to clean it than place it
Yall have to be running super dirty throttle bodies.
TO KnO is To Be Aware - 👁️💦🌎