LOL. Even to this day I can't truly 100% hide my country accent. Two times it shows through are if I'm tripping on words, or if i get really riled up, I'll give up on attempting to gentrify my speech and just let it all come out.
A Shelby GT350 with equal length headers will do the trick. It basically already is a Ferrari engine anyway. Without the deliberate exhaust scavenging jamming, the car will scavenge evenly and scream like a mofo. Especially with it's high RPM. There's some videos of it with equal headers. Unforgettable sound.
I would like to see a Bladed Angel guide to car laws. You do mention that some stuff are illegal, and legal in different regions. It would be nice to know more about these laws more specifically, and where those applies. You can also go through misconceptions and less known laws that are good to know. Informative, and interesting. - But it would also be great if you could cover more regions than just USA, for your international audience.
UA-cams garbage ass processing is why. I just went to change endcards and whelp. Got stuck with the infinite processing glitch. Beats me how they still haven't fixed that.
I just found your channel and I don’t know much about cars but man your channel is Amazing I’ve learned a good bit from the couple of videos I’ve watched!
@@tony_5156 From what I know , the ZR1 isn't out yet. Also , if I have the money to buy a ZR1 , I would insted invest that money, because right now the economy is crap but it will go back up eventualy.
Another advantage to headers is that most stock engines now have aluminum heads which is a GOOD thing. The bad thing manufacturers dropped the ball on is bolting a cast iron exhaust manifold to the Aluminum heads. Aluminum cools alot faster than the cast iron does. Cast Iron retains heat for a long time. With heat, comes expansion & the different rates at which the two different metals cool is huge, enough that the studs will end up snapping or the bolts can strip right out. Headers even though made of Steel, it is thin and cools alot faster than the cast so the expansion and retraction of the head & headers is as close to equal as you can get and solve that issue.
About a year ago, I had short tubes installed on my 03 Dakota 3.9L. Between that, the cat, magaflow rumbler, and turn-down at the bed, it sounds nasty, but tame at idle and low rpm cruising. Due to the fact that the engine only revs to around 5k, I don't get quite the drop off that some cars get, and it still sounds good if I'm pushing redline. Only complaint is the drone that comes with have an exit underneath the vehicle. I've had a number of people ask me if it was the 5.2L since having it installed, so I guess I can be considered a ricer now... 😅
I think ima go with equal length shorties on my 2003 Chevy Tahoe v8. I’m all about prolonging the life of my engine! And shorties seem the best for that with little no no issue of installing! Hell yeah!
Long Tube Headers... 05-2011 Grand Cherokee SRT8. Who Else Went Through Hell And Back Installing Them And Lived To Tell LMAO. 11 Hour Install Time On My 06 Jeep Commander With A 5.7 Hemi. And I'm A Chrysler Tech With 5 Years Experience. Omg I Was Gonna Do A Cam Later But The Thought Of Taking The Headers Back Out Gives Me The Chills hahahahaha
Very informative, loved ur content thanks alot man, it's great to hear someone who understands and knows what's best for a vette rather than adding tunning many stuff that do none but damage the ride I'm not technical person so want to ask u what would u best advice if I want to change the sound of my c6 GS 2010 to best ? Mine is pure stock Basically I'm just looking for plug n play, no mods no tunning
I’m surprised you didn’t mention how exhaust pulses are affected with different header setups. Subaru guys especially will tell you that it’s a world of difference between EL and UEL headers.
I can honestly say this is the very first time I have ever heard these 2 things being the first that it will magically make your car like something else when that is what the muffler is for yes headers will change the sound but make it sound more "tin like" and now the 2nd thing what is true long tube headers are you trying to say full length headers cause thats what they are classified as so you can turn out the collector out the side of the car and long tune headers or as you say mid length are for you to continue to run the exhaust all the way out the back
my car has an exhaust leak, probably gonna do equal length (so I can still run on 87 octane) shorties when I replace the original manifolds because most of the 54 year old 330 ci V8 is torque anyways.
The most important thing to get right is primary tube diameter... In a n/a 90degree V8 primary length is is far more important than than being equal and shorties are a waste of money, even more if equal length.
What all could I get rid of in an engine bay to fit mid- tubes? It's so crowded and I'm wondering how much of it is necessary when I see hot rods that are just the engine, tubes, massive carburetor scoop and some turbos.
An option for some mid 90s early 2000s cars is a chip I have the jett stage 2 on my 4cy 5speed s10 with a header and cold air and it went from painfully slow to slightly less slow (14 sec to 12sec 0-60) ecus are expensive and getting a actual performance gain from a stock ecu with a header for like 200 buck is totally worth if u plan on daily driving just do your research
So what is the typical price range for long tube headers I’m making my 2005 doge truck a racing truck and have about $800 dollars to spend on headers. Is that enough or do I need more
i have true long tubes running straight from my 400sbc right out the back of my 48 diamond t 201. 76 lifte k2500 with a rat-rod truck body means no fitment issues at all
Is there a header that can make a rotary sound like an American v8? That would be hilarious. Long tube headers on a rotary would also be hilarious , sends the peak power to the end , with probably horrible low end power
Hey Bladed Angel, I was wondering, would it be possible to tune the sound of a piston engine through the use of extremely clever header design to make it sound like a Wankel/rotary? Of course, the more amount of cylinders a car has, then it would sound more "even", which might help make it more possible, but not everyone can afford to drive a V12. What about a clever header design that can make an inline-6 sound like a Wankel/rotary? So I'm thinking that the primaries have to be equal-length and also bequite small and short, so the speed of the gas is moved evenly and very quickly to join with each other. I'm also thinking that it must be a 6-1 instead of 6-3-1 as most inline 6's use. I'm thinking that the system might also use a high-pass-filter resonator, to only allow high pitched sound to come through, which makes it sound even more like a Wankel/rotary.
You guys ride so high up, you never have to worry about the scraping ground clearance I Mentioned. Meanwhile at stock ride height, my Z06 still sparks if I don't go up slopes slowly at an angle. LONG TUBE LYFE
Yea, my truck can't even fit any kind of aftermarket headers (to my knowledge) so I will most likely have to go custom, I guess that's truck life for ya.
@@okigojuryu is that an H3? If so I know a good bit of parts are shared between the 04-12 Canyons and the H3's. So if that's the case go to ottperformance.com
@@all5cylinders860 H3T alpha actually(the V8 pickup version) and the h3s have extra cross members, thicker frame ect, so most Colorado parts don't actually fit h3 alphas. I will give it a look anyway, thanks.
@@ImKittyCow yes 100% no lie. There is no drone crusing or on the freeway. Loud as hell whenever you get on it. Kinda like valves but just the design of the corsas.
You have it backwards. Short headers are tuned for high RPM, long tubes are tuned for torque at low RPM. Same as an intake. The pipe length is tuned like a musical instrument, a longer pipe reverberates at a lower frequency.
Headers use one combustion of a cylinder to suck the exhaust out of the next the the same way a carburetor works that's why you get more performance not just because they flow better, that doesn't do a whole lot
Is the mid long tube headers perfectly balanced like all things should be *Thanos heard car start up with mid long headers* Thanos: perfectly balanced, like all things should be, Mid long headers: Thanos approved👍👌
I’m dropping my current favorite car (Alfa Giulia) for it. Well, good chance. I need to see it in person first. Someone I know works at the Chevy dealer near me, so I will soon
Stupid question, would it be advisable to get a ECU tune if I were to get short tube headers installed?
I'm honestly wondering this too
Edit: nevermind
Easy answer. Always. For shorties, an email tune would work fine. Anything longer, I recommend Dyno tuning.
@@BladedAngel Tune was recomended even for stock headers
@@BladedAngel thanks for the info, much love
Joe Mama
Ofc
"get a tune to take advantage of the headers"
*Laughs in carbureted
*stumbles a bit then takes off*
Yeah
I envy you.
Eh I'll just hack job my O2 sensor and hope it won't throw a code but either way
SEND IT!!!
Carbs are trash
@@390nm they can be tuned in really well, but it all depends on the person tuning it. Doesn't take care of itself like an efi system
“Cast Arn” carful blade, your Georgia is showing.
Lol
It's been many years since any Mustang , Camaro, Firebird, Corvette or even a Mopar had cast iron exhaust manifolds.
LOL. Even to this day I can't truly 100% hide my country accent. Two times it shows through are if I'm tripping on words, or if i get really riled up, I'll give up on attempting to gentrify my speech and just let it all come out.
Who's here after seeing how his Corvette sounds?
Everybody
RogueBullet pretty much
Same
So I've been watching car videos all day now and I just wanna take a moment to appreciate how awesome cars and their surrounding community is
That was a really nice flower. Made that whole chart come together 😀
Is there a header to make my car sound like Bruh Sound Effect #2?
I really believe this comment is under rated
I would make my header scream like karen asking for the manager
“Bruuuuuuh, bruuuuuuuuuh, bruuuuuuuuuuuuuuuuuuuuh, bruuuuuuuuuuuh, BRUUHHHHHHHHHHH!”
Prolly if you just kept the stock ones since that's seen as a bruh moment in the car community
Frick
“Thanos would like these.”
I’m sold on mid-lengths for my 4.3 S10
so ur telling me i can make me mustang gt sound like a ferrari huh.Time to buy some headers
A Shelby GT350 with equal length headers will do the trick. It basically already is a Ferrari engine anyway. Without the deliberate exhaust scavenging jamming, the car will scavenge evenly and scream like a mofo. Especially with it's high RPM. There's some videos of it with equal headers. Unforgettable sound.
But bladed
Where's The MIATA???!!!!
Lol
Lmao
Josh Cc lol
How's the miata
me and my dad were litterally about to buy new headers for our new rx8, and this guide is perfect because we were stuck
This video is actually disguised as "Bladed'sd Vette is finally sounding like a real ferrari"
If he put 180 Header obviously
@Deoxide I see you are a Man of culture as well
Damn, the automotive scene on UA-cam is pretty small
LMAO, you predicted it.
funny seeing you here
Honestly kind of interesting to hear what a diesel engine would sound like with each of these set ups :D
unless it's N/A it'll never ever gonna happen
I would like to see a Bladed Angel guide to car laws.
You do mention that some stuff are illegal, and legal in different regions. It would be nice to know more about these laws more specifically, and where those applies. You can also go through misconceptions and less known laws that are good to know. Informative, and interesting. - But it would also be great if you could cover more regions than just USA, for your international audience.
I love how he put a Subaru when talking about reliability and detonation.
What will you see while racing a r35?
Oo\______/oO
What About R34?
Oo I_____I oO
What about a Corvette C6
●●\___/●●
What about a Lamborghini Murcielago
@@sebastiangeorger5791 what about a Buagtti Chiron
_________________
@@KiiroiKodomo what about a Supra
(OOOO) (OOOO)
I saw this yesterday why did it get taken down
Edit never mind
Me too
read the description
UA-cams garbage ass processing is why. I just went to change endcards and whelp. Got stuck with the infinite processing glitch. Beats me how they still haven't fixed that.
Oh RIP I got a heart from Bladed on the original.
Here's one again.
Bladed Angel Oh my god you are senpai
8:02
Fun fact: "quasi" in italian means almost
I just found your channel and I don’t know much about cars but man your channel is Amazing I’ve learned a good bit from the couple of videos I’ve watched!
I need headers so that my 6-banger sounds like a V8
Jack Russelle V8< getting the V8 and still adding headers
Texas speed!!!! Probably gonna go with them when I get some headers for my Gto
What year is the car
It’s a 2005
Thinks bladed , now I have the goal to buy a c8 and make it sound like a Ferrari
You could do an 8 to 1 header. Look up the v8 swapped vw passat
No need since they’re making a FLATCRANK version with a high revving tone
@@tony_5156 From what I know , the ZR1 isn't out yet. Also , if I have the money to buy a ZR1 , I would insted invest that money, because right now the economy is crap but it will go back up eventualy.
I want a header to make my 350z sound like a Ferrari just to flex on all the non-car people
Finally I can make my automatic v6 Mustang sound like a v8
Don't know why this video has low views, it's one of your most informative videos !
Long tube: *exist*
Thanos: perfectly balanced, as all things should be
Another advantage to headers is that most stock engines now have aluminum heads which is a GOOD thing. The bad thing manufacturers dropped the ball on is bolting a cast iron exhaust manifold to the Aluminum heads. Aluminum cools alot faster than the cast iron does. Cast Iron retains heat for a long time. With heat, comes expansion & the different rates at which the two different metals cool is huge, enough that the studs will end up snapping or the bolts can strip right out. Headers even though made of Steel, it is thin and cools alot faster than the cast so the expansion and retraction of the head & headers is as close to equal as you can get and solve that issue.
About a year ago, I had short tubes installed on my 03 Dakota 3.9L. Between that, the cat, magaflow rumbler, and turn-down at the bed, it sounds nasty, but tame at idle and low rpm cruising. Due to the fact that the engine only revs to around 5k, I don't get quite the drop off that some cars get, and it still sounds good if I'm pushing redline. Only complaint is the drone that comes with have an exit underneath the vehicle. I've had a number of people ask me if it was the 5.2L since having it installed, so I guess I can be considered a ricer now... 😅
Guys the reason it was re uploaded is in the description.
alright, totally gettin true long tubes for my 95 chevy 5.7.
i’m playin
Samurai champloo music at the very beginning. I don't thing anyone finds that interesting, but I like that soundtrack.
I think ima go with equal length shorties on my 2003 Chevy Tahoe v8. I’m all about prolonging the life of my engine! And shorties seem the best for that with little no no issue of installing! Hell yeah!
Ever get the feeling of deja vu?
NicoMaster29 is that from stronghold 2?
Overwatch
vaxinity desu nah bladed uploaded this video twice, was confused tf happened
@@nicomaster2942 yup
We’re in the Matrix
2:52 did you just put a Mazda rx8 gauge in a video about long tube headers?
What about 8 into 1 headers? Don't forget the little known holy grail
Nah screw headers just go no exhaust and your motor will breathe freely
Why didn’t you talk about stainless vs ceramic coated vs titanium?
You know your a powaaaaahhhh boi when you have true long unequal headers in your car
That subtle stance boy diss
good, I just checked if Utah had any Laws against Loud exhaust (We don't have one)
Equal vs. Unequal 7:00
Equal: Smooth sound and power.
Unequal: Adds rumble
I just got some headers from AFE for my Titan and a cat back exhaust as well.
Man so many good info! Keep going bro 👍🔥
Long Tube Headers... 05-2011 Grand Cherokee SRT8. Who Else Went Through Hell And Back Installing Them And Lived To Tell LMAO. 11 Hour Install Time On My 06 Jeep Commander With A 5.7 Hemi. And I'm A Chrysler Tech With 5 Years Experience. Omg I Was Gonna Do A Cam Later But The Thought Of Taking The Headers Back Out Gives Me The Chills hahahahaha
Me puts real longtub on 1996 bronco like "ya it's a track car" also got them for free from uncle made in 1962 costom made
*long headers hang low*
Me with my Bronco:
"I DON'T HAVE SUCH WEEKNESES"
cool background music
Nascar is like: the rest of the exhaust? We only have tubes for every cylinder
Shorty headers
H pipe
cat back, get that torqueeee
I can't wait to leave cali
I would love 180 degree headers
In the state and county I live in the only emission testing is lift the car check to see if theirs a catalytic converter and it passes
Very informative, loved ur content thanks alot man, it's great to hear someone who understands and knows what's best for a vette rather than adding tunning many stuff that do none but damage the ride
I'm not technical person so want to ask u what would u best advice if I want to change the sound of my c6 GS 2010 to best ? Mine is pure stock
Basically I'm just looking for plug n play, no mods no tunning
Some of these looked like balloon animals!!
My westfield has a side exhaust so i dont have to worry about hitting the exhaust on the ground but the oil sump is very low.
I’m surprised you didn’t mention how exhaust pulses are affected with different header setups. Subaru guys especially will tell you that it’s a world of difference between EL and UEL headers.
I can honestly say this is the very first time I have ever heard these 2 things being the first that it will magically make your car like something else when that is what the muffler is for yes headers will change the sound but make it sound more "tin like" and now the 2nd thing what is true long tube headers are you trying to say full length headers cause thats what they are classified as so you can turn out the collector out the side of the car and long tune headers or as you say mid length are for you to continue to run the exhaust all the way out the back
The gt350 sounds different because it's not a normal floatplane, it's up down up down and not down up up down
I can make my 86 camaro sound like a ferrari?! Count me in...😂
my car has an exhaust leak, probably gonna do equal length (so I can still run on 87 octane) shorties when I replace the original manifolds because most of the 54 year old 330 ci V8 is torque anyways.
The most important thing to get right is primary tube diameter... In a n/a 90degree V8 primary length is is far more important than than being equal and shorties are a waste of money, even more if equal length.
Was the, “theres a header for that” a play on oversimplified’s “theres a tax for that”? Cause it instantly reminded me of it
What all could I get rid of in an engine bay to fit mid- tubes? It's so crowded and I'm wondering how much of it is necessary when I see hot rods that are just the engine, tubes, massive carburetor scoop and some turbos.
Can't believe that i subscribed here when this channel is still have 400 subs
"And before you feel bad about running shorties , remember that how you use them also matters " I can relate but it's not related to cars
Im here after hearing your vette
"Just like everything in life, size matters too."
My 04 Monte Carlo SS 3.8L (not Supercharged) has a med/low rumble sound at idle. And sounds like a V6 muscle car at 4000rpm.
I have Hooker true long tubes on my '67 charger 383ci
I think my 2001 Tundra with the 4.7 V8 would sound nice with mid lengths
I put in shorties on my 2003 tundra
Sounds slightly different
An option for some mid 90s early 2000s cars is a chip I have the jett stage 2 on my 4cy 5speed s10 with a header and cold air and it went from painfully slow to slightly less slow (14 sec to 12sec 0-60) ecus are expensive and getting a actual performance gain from a stock ecu with a header for like 200 buck is totally worth if u plan on daily driving just do your research
So what is the typical price range for long tube headers I’m making my 2005 doge truck a racing truck and have about $800 dollars to spend on headers. Is that enough or do I need more
never forget that scene in transformers when megan fox says “woah you got nice headers” and shia lebouf is just drooling at her 😂😂😂
Thanoscopter has mid-length headers.
i have true long tubes running straight from my 400sbc right out the back of my 48 diamond t 201. 76 lifte k2500 with a rat-rod truck body means no fitment issues at all
Your right about youll get used to shifting at your cars loudest point, when i play forza horizon i shift with the sound not spedo
Is there a header that can make a rotary sound like an American v8? That would be hilarious. Long tube headers on a rotary would also be hilarious , sends the peak power to the end , with probably horrible low end power
Hey Bladed Angel, I was wondering, would it be possible to tune the sound of a piston engine through the use of extremely clever header design to make it sound like a Wankel/rotary?
Of course, the more amount of cylinders a car has, then it would sound more "even", which might help make it more possible, but not everyone can afford to drive a V12. What about a clever header design that can make an inline-6 sound like a Wankel/rotary?
So I'm thinking that the primaries have to be equal-length and also bequite small and short, so the speed of the gas is moved evenly and very quickly to join with each other. I'm also thinking that it must be a 6-1 instead of 6-3-1 as most inline 6's use. I'm thinking that the system might also use a high-pass-filter resonator, to only allow high pitched sound to come through, which makes it sound even more like a Wankel/rotary.
I dont have options for my truck. I was up at 5 this morning looking for parts and actually ended up finding some long tubes.
You guys ride so high up, you never have to worry about the scraping ground clearance I Mentioned. Meanwhile at stock ride height, my Z06 still sparks if I don't go up slopes slowly at an angle. LONG TUBE LYFE
@@BladedAngel oof haha. I originally planned to do a 3" drop all around but after knowing that not too sure that'll go too well.
Yea, my truck can't even fit any kind of aftermarket headers (to my knowledge) so I will most likely have to go custom, I guess that's truck life for ya.
@@okigojuryu is that an H3? If so I know a good bit of parts are shared between the 04-12 Canyons and the H3's. So if that's the case go to ottperformance.com
@@all5cylinders860 H3T alpha actually(the V8 pickup version) and the h3s have extra cross members, thicker frame ect, so most Colorado parts don't actually fit h3 alphas. I will give it a look anyway, thanks.
ive got some True Long Tubes on my 6l ls2 no cats and it sounds incredible, but there is some craaazy drone unfortunately
Corsa extreme catback will handle that. I have no drone with longtubes and no cats with corsa axleback. C5z by the way.
@@toodanderson351 I do have the stock catback, but I also have a 236/236 .660/.660 112lsa camshaft. Did the Corsas really help that much?
@@ImKittyCow yes 100% no lie. There is no drone crusing or on the freeway. Loud as hell whenever you get on it. Kinda like valves but just the design of the corsas.
Honda vtec... turbo... true long pipes... I need it.
Wouldn’t stock headers have a better sound because the noise will go out quicker?
Yes, Thanos would like long headers.
Noobs: STOP BULLYING US AAAHHHHHHHHH
6:00 i first made 4 in 1 LTH, but it was too low so i made new LTH 4-2-1
You have it backwards. Short headers are tuned for high RPM, long tubes are tuned for torque at low RPM. Same as an intake. The pipe length is tuned like a musical instrument, a longer pipe reverberates at a lower frequency.
Imagine a hellcat red eye with tru long tubes straight piped 😲
3:06 thanos would like these 💀💀💀
Okay so what I gather from this is to run true long tubes with no mufflers on the street for daily driving for max power to get to work and back.
Love your thinking 😭💯💯
I ligit read the title as a headers guide to modding noobs.
Headers use one combustion of a cylinder to suck the exhaust out of the next the the same way a carburetor works that's why you get more performance not just because they flow better, that doesn't do a whole lot
Is the mid long tube headers perfectly balanced like all things should be
*Thanos heard car start up with mid long headers*
Thanos: perfectly balanced, like all things should be,
Mid long headers: Thanos approved👍👌
I'm mad you uploaded when I was sleeping :(
7:45 it is smart if firing order is equal
Thanos would approve 😂
Hey bladed, why not do a video on suspension next ?
So I guess I'll go with Thanos.'s openion
If I had money and cat Id go for mid lenght equal headers seams like a good choisr to me (04 Impreza)
What are your thougths on the new c8 corvette?
I’m dropping my current favorite car (Alfa Giulia) for it. Well, good chance. I need to see it in person first. Someone I know works at the Chevy dealer near me, so I will soon
The back is ugly and it doesn’t look like a traditional corvette but I like the car from a performance standpoint