Hikvision PanoVu Cameras Review (DS-2CD6924F-I & DS-2CD6D54FWD-IZHS)
Вставка
- Опубліковано 7 лют 2025
- In this video we demonstrate Hikvision's PanoVu solution while reviewing its capability.
Featured in this video is the DS-2CD6924F-I and DS-2CD6D54FWD-IZHS which is installed at our head office in Cardiff.
DS-2CD6924F-I(S)(/NFC)[4mm]
8 MP PanoVu Series Panoramic Dome Camera
• 1/2.8" Progressive Scan CMOS
• Panoramic camera
• 4096×1800@30fps in panorama mode
• 4×4mm fixed lens
• 4 * IR Lens, up to 20m IR distance
• H.265, H.265+
• IP67
DS-2CD6D54FWD-(I)Z(H)(S)(/NFC)
EXIR Flexible PanoVu Network Camera
1/2.7” Progressive Scan CMOS
2560 x 1920 @ 25fps
FOV: horizontal 30° to 101°, vertical 22.4° to 73°, diagonal field of view: 37° to 137°
H.265, H.264, H.265+, H.264+
Fiber optical transmission, optional
10 m to 30 m IR range
IP67, IK10
4 flexible lens
6 behavior analyses, 4 exception detection, and face detection
www.dvs.co.uk
Holy Crap that 20mp Pano is HUGE!
Hi do these pano camera use separate Poe per lens or all down one line
All in one mate 😊 , 4 cameras , same IP address , different channel number
DVSLTD hi thanks for the reply , im using a 4 channel nvr and using 2 of the network ports can I still use this type of pano camera :)
@@gingerninja7187 Yes you can as its 1 channel @8MP for the 180 model , you will have to use a inline POE injector to run it correctly 😊
DVSLTD Hi I require the 180 model that all the lens are adjustable as at the moment I’m using a ptz dome so im after an all in one to cover the front of my property could you supply the relevant model no,s
Thanks
@@gingerninja7187 Hi , we don’t have a 180 that is adjustable lens , we do have a 360 version that you can move the camera models to suit , this will require 4ch on the NVR if you add all 4 and wont add via POE port will need to use LAN side to add the channels camera is DS-2CD6D24FWD-IZHS
Very goud
how do i connect the panovu to nvr and get the three output channel
Hi, you mean 4 outputs? You need to login to the camera via the web login then change the operating mode
@@DVSLTD what hikvision nvr do you recommend for the 20MP
Hello, I just got my DS-2CD2725FWD-IZS. I had a hard time understanding the manuals because it only has pictures with no explanation written. I downloaded IVMS4200 to control the camera but I can only zoom in and out, I cannot pan, tilt or rotate with this software. I have looked everywhere for and answer without results. Can you help me please? Thank you very much.
Can the DS-2CD6924F-I be mounted directly to a ceiling (e.g. the soffit under an eave), without the pendant mount? If so, would it still be weatherproof?
Hi , we need to use the pendant mount currently
Hi , we need to use the pendant mount currently
I was looking through the installation guide but unfortunately it only has pictures and no words.
Can you operate it just with an ethernet cable or do you need to hook up all the other wires/cables depicted in the manual as well?
Just a Ethernet cable with POE is all you need , the others are alarm and audio I/O and 12VDC Power input etc. , you don’t need all of these 😀
@@DVSLTD Do you need a POE injector or do you only need that if you needed to run the heater?
@@kraquin Hi ,you can use the POE + or POE ++ ( 60w) recommended for heater model , or 12VDC , it’s your choice
@@DVSLTD Received my own DS-2CD6D54FWD-IZHS the other day. Smaller than I thought. I use Blue Iris and have run other Hikvision cameras just fine but it doesn't seem to like this camera.... freezes no matter what type of video configuration. I think I'll have to switch back to iVMS-4200.
John Locke Hi john , strange , have you tried adding as ONVIF to test? You would need to enable it in camera web 1st and then setup user and add to that software , also turn RTSP and web to Digest / basic 😀
Is there any smart analytics you can use with this?
Yes, we can use intrusion or line cross or cameras 1 & 3 or 2 & 4
Our 180 model supports line cross and intrusion also
Please email me at shannondalebreaux@gmail.com?
Do you have to have dvr or can you record directly to sd card to the camera? Do you have the panvu mini series with the ptz?
Hi, I would like to ask for some advice. I am making a proposal to our client for a Solar farm with an area of 38 hectares and the camera I'm proposing is DS-2CD6D54FWD-IZHS. In what way I can efficiently stream the footage, is it via POE or Wireless? Can you suggest something?
I like to know what the RTSP output is like. Is it stitched with 4 cameras in one stream? Or are there 4 RTSP outputs? Thank you for your help.
You can pull the channel as 1 image stitched as it only uses ch1 as normal IP camera
What firmware does the camera have?
firmware on the PanoVu can be found on this link:
www.hikvisioneurope.com/portal/?dir=portal/Product%20Firmware%202018/Front-ends/IP%20Camera/H3%20platform%285xxx%2C7xxx%2C6924%2C6DX4%2C8426%29/DS-2CD6924
شي رائع جدا ما تقوم به
What's the price for the panovu 20MP? 4 individually sensors.
Hi Shannon , we don’t really show pricing on the channel , you can obtain it via a authorised distribution channel , are you based in the UK?
Spudcam alert 🚨 😂
We have recently invested in a GoPro haha