C63 Exhaust and diffuser installed on a 2016 Mercedes C Class with standard bumper (non AMG line)
Вставка
- Опубліковано 15 чер 2024
- Welcome to my quick video on installing the C63 exhaust and diffuser to my S205. This is the standard bumper not the amg line version. The product link is below.
Product could be brought here - ebay.us/qHmJmQ
Welcome to my brand-new channel. This channel is mainly following the thought process and build process of my new 2015 C Class 350E Estate. I will be posting videos as I go along. The videos will show how I install the new parts and correct the minor defects in the car.
Although this is mainly following my Mercedes build. I will post others videos or other car and bike related builds.
DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz or Smart. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not myself. - Авто та транспорт
Looks nice! Something i want to buy also. I have a c180 with standard bumper. I was told i need to adjust the left exhaust tip. Because mine only have one exhaust on the left with double pipes down.
You may need to cut them straight to fit into the exhaust tip. I had a 220d before and that exhaust was oval and pointed down. It sat just before the exhaust tip on the last c63 kit I put on so you might be OK.
@@mvautomotive7092 ok thanks for the information. Just only the two pipes some cm off then and it should be ok.
@Anthony G did you try it on your car, with the exhaust tips om the left?
@@anthonyg87 did you try it on your car already?
@@emielpeek6347 stil need to buy the difusser. But what i know is for the exhaust tip you need to grind the corners straight, so the exhaust tip wil fit.
Thank you.
Thanks for making this video! - Actually went ahead and bought the exact same one for mine, and looking great. Although it seems that I'm running into some (first world problems) issues with the diffuser it self bulging out a bit on the middle so not sitting flush with the bumper, and it seems you have a bit of this as well? Did you find a way to fix that, or just left as is?
Thank you. A little yes. Just put something behind to push against and push really hard lol. Mine did eventually flaten out.
@@mvautomotive7092 Cheers, happy to hear it went out after a while! - Ha, yeah doesn't seem to have anything to click stuck at behind that place, will perhaps take it off and check another time behind!
Thanks again, this was a stellar guide for install, spot on!
i have a classic bumper as well, but without even the exhaust tips.
if i buy this upgrade do my bumper has placing space for the exhaust tips?
Yes it does. Iam assuming yours is a diesel?
@@mvautomotive7092 yes a 250D with adbleu
@@wellezrobin it will fit and has the mounts but the exhaust tip will need slightly modifying to fit behind the adblue tank.
I have ordered and just received the same diffuser, I am just wondering if it would be nice to paint the whole plastic shiny black or if it is better to leave it like that. Any thoughts?
I think it looks nice as is but each to their own. No reason why you couldn't.
Please tell me the serial number of the muffler cutter bracket that was originally installed
I have a c350e 2016 mod stationwagon. Just AMG line inside. Will this fit my car?
My vehicle is the s205 c class estate. Non amg line. If your vehicle does not have the air vents in the side of the rear bumper then your have the standard bumper and this will fit. Or if your vehicle had a small chrome strip, In the middle of the front bumper and not a full chrome diffuser then you have the standard bumper and again this will fit. Hope this helps?
So i have Got a c220 d stationcar from 2018, its an avantgarde model, so standard bumper, would that diffuser and exhaust your using fit mine? Or do i have to Cut somethings??
On the 220d the adblue tank sits behind the bumper. That diffuser will work but the exgaust tip and mount needs modification to fit around the tank. That's the same for all diesel models
So cutting a circle in the exhaust tip, so it fits around the adblue tank right? Or do you need to make other modification?@@mvautomotive7092
Who did you buy this kit from? The link you provided doesn’t work. I’d love to look into getting one for myself.
Is your vehicle sports line or amg line?
@@mvautomotive7092 it is. 2018 c300 coupe. AMG line.
@SubaruGuy13 c63 or c43 style? Where are you based?
@@mvautomotive7092 I think I like the C43 style better. Proper for ent is my primary concern. I live in Texas, USA.
@SubaruGuy13 the c300 does not have any fitment issues that I know of. I have fitted 3 sets now 2 on the amg line and 1 as per the video. All the kits are from ebay and I have not had any issues with the kits.
Hello My c220d have a standard bumper without exhaust tips. My exhaust pipe is pointed down on the left. I checked and it would be good for the left side. But for the right side there is a cover behind the bumper and I am not sure could it be removed. Do you know can this kit fit my car？
On my previous c220d it had the adblue tank in that area. The exhaust tip will fit there but you have to cut a half circle out of the back with an angle grinder to accommodate the tank. This is common for both sports bumpers and amg line fitting the quad exhaust tips. This kit is for the sports bumpers so will fit. It is common on diesel models to modify the exhaust tips.
@@mvautomotive7092 Thanks dude！
@@mvautomotive7092 Hi friend. How can I cut the back？Should I remove the tank first？
@Steven Shen leave the tank there. On the exhaustbtip remove a half moon shape from the top side at the back. Little bit at a time. Trial fit as you go.
@@mvautomotive7092 Thank you I will try.
serve na c180 coupe?
Did the small black pop in work ?😊
They do and so do large rivets. But ties work just the same haha
@@mvautomotive7092 thanks for the video! Do you know the diameter of the rivets?
@tobiasbohm5168 I am sure I used 4.8x16. Most people use 5mm cable ties as its just as easy.
@@mvautomotive7092 Awesome, thank you!
Did u just put the stock diffuser back?
In the kit you get a new diffuser, exhaust tips and mounting kit.
Does this work on a amg line with retractable towbar?
This version is for the sports model but you can get ones for the amg line. They do fit slightly different but both suffer the same mounting issues if you have a diesel or adblue tank. If you have a petrol there is no issues. They are the same size and fit in the exact location as oroginal diffuser so should not have issues with towbar.
does a amg bumper fit on a non amg car?
I don't think it does no as the lines are different
Can I buy your old exhaust tips?
Sorry I no longer have them.
You can buy mines