Fantastic idea with the cones, would of loved those back in the RKS days, rebuilt so many and fingers were not happy for the rest of the day after doing so. It's a Work smarter idea, not harder. Winning Mate.
Derek, I'm a bit puzzled at the moment. I want to change my rotax max gear oil but I don't know what to use, I heard to use TPF but don't know what product works best. Any certain gear oil I should use?
Do you know if there’s any way I could fix my bent steering wheel? I got into a crash and the kart flipped onto the wheel so it bent up. I really don’t wanna replace it since it’s quite costly so do u think there’s any way I could bend it back to it’s original shape?
Yo Derek, I have a problem and don't know where to look. on the straight the engine runs up to 12200 rpm and then stutters. if I let go of the gas and then press it again, the engine runs again to 13900 rpm but I lose a lot of time and speed because of the gas. what could i try? greetings from the Dutch
Hey Jordy. Thanks for writing in. Sound like she’s a touch lean on the main jet or even clip position. First up go up one jet size. Then if that helps, drop the clip and raise the needle one position. Hope that helps bro 👊🏿
Starting to sound like marty and moog with all the talk of greasing shafts and squeezing the rubbers on 1st..
hahhahaha classic
Fantastic idea with the cones, would of loved those back in the RKS days, rebuilt so many and fingers were not happy for the rest of the day after doing so. It's a Work smarter idea, not harder. Winning Mate.
Thanks legend.
It seams to me, the grease would contaminate the break fluid . Would it be better to use break-fluid for lube . ? I appreciate the show . Thanks.
either will do, the rubber grease is all good
Is this the same in junior karts?
anything with the EVS brake system as the seals are different to the older style brake pumps
Totally unrelated but what's the thread size for a rotax max non Evo spark plug thread? Cheers
M14 x 1.25 mm
Is it possible to use new areo plastics on old chassis, for example the 2022 plastics on a kosmic 2014 chassis
sure is, you might need to update your side pod bars and Nassau panel mounting brackets too
Yo Derek, I have an idea for a video! oversteer and understeer. what to do if you don't hit the apex and slide in the middle and/or exit of the corner
Hey Jody, how are ya? great sugestion, I have to add it to our video list!
Derek, I'm a bit puzzled at the moment. I want to change my rotax max gear oil but I don't know what to use, I heard to use TPF but don't know what product works best. Any certain gear oil I should use?
Either motorbike gearbox oil or dex3 Automatic Transmission Fluid. Either is fine
@@PowerRepublic does it matter if the motorbike oil is for 4 strokes, for the rotax max engine
Do you know if there’s any way I could fix my bent steering wheel? I got into a crash and the kart flipped onto the wheel so it bent up. I really don’t wanna replace it since it’s quite costly so do u think there’s any way I could bend it back to it’s original shape?
I legit did it with a long pipe and just bent it back till its kinda straight, butt i did it bc the day just started and we didnt have spare parts so.
I have had the same situation and literally just pulled it back into shape. the wheel is normally aluminium and bend easy enough
Yo Derek, I have a problem and don't know where to look. on the straight the engine runs up to 12200 rpm and then stutters. if I let go of the gas and then press it again, the engine runs again to 13900 rpm but I lose a lot of time and speed because of the gas. what could i try? greetings from the Dutch
Hey Jordy. Thanks for writing in. Sound like she’s a touch lean on the main jet or even clip position. First up go up one jet size. Then if that helps, drop the clip and raise the needle one position.
Hope that helps bro 👊🏿
@@PowerRepublic thanks Derek. Gonna try it
@@PowerRepublic thanks it is fixed! You are awesome
What kind of grease are you using? Must be high temp and a type that doesn't expand seals? Thanks