There are alternative points on the back of the motherboard you can solder to to make the top side look absolutely untouched. Did two falcons and they boot instantly.
Yea, fair point. I'll update the written guide with the DB1F1 alternate as an option for folks. For anyone interested in a kit that contains the resistor and diode you need you can get that here: weekendmodder.com/store/index.php?route=product/product&path=60&product_id=273
I've got a 256 jasper, will boot xell perfectly instaboot everytime Booting the dash glitches instantly also but also hangs at the end of the xbox logo animation, just after it signed into the profile I created to test the console. No hdd fitted I'm stuck
I actually just finished my second RGH for a jasper, broke the clk pad but learned how to repair the trace and got it working! Just ordered parts for a slim i picked up from your site to RGH 3
Thanks for making this man, I just killed my slim attempting the RGH 3 (that pll point is so tiny) but I still have an old falcon soI'm ready for round two! From what I've seen the points are a lot more reasonable, provided that I can scavenge a resistor and diode from somewhere.
Yah I won't mod a slim for rgh3 cause of that point. The phat consoles are easier for rgh3 but they are unstable still in beta. I did install on jasper it works great boots are fast. But ring of light is sometimes buggy
Welcome back doing Xbox stuff, how many parts and pieces from you back in the day I guess I need to buy some more parts I still have a few of these old ones laying around. Thanks again, Max
Thank you... booted Xell first try! Two weeks ago I spent at least 8 hours trying to RGH1.2 this same Falcon with no luck at all. I didn't think this was going to work because the original firmware RROD'd with the wiring installed, before I flashed the glitch 3 ECC... Wow, this is great. 20 minutes and success vs 8 hours and failing miserably! Oh, also I used 33K ohm resistor because I didn't have 22K.
I have done multiple rgh installs with no issues but one I installed recently the coolrunner chip was bad it RROD on both consoles and one won't turn on properly anymore get 0022 which is smc. I think chip had short in it which took out southbridge
Thank you so much for this!! Ended up having to resolder the RGH wires like 5 times (im kinda new to this) but at the end it booted into Xell! Again thank you.
And for removing all those screws I bought a little cheap $30 electric cordless drill more or less but it's tiny it weighs like 1 lb. Save so much time on the hundreds of councils I had to open and close. Back when you can make money and actually repairing these and reselling them. Did it out of my home during the recession and I was kind of fortunate that during the recession this kind of service was needed cuz I could make way more money than at any job available at the time even with a two year computer networking degree.
Thanks for a great tutorial. Just did the rgh3. 0 on a falcon 16mb and perfect. Instant boot everytime so far. I didn't have high expectations for the 3.0 but truthfully, it's turned out better than the rgh1. 2 jasper's in my possession, so pretty damn good. Thanks.
Thanks for your detailed tutorial. I did my first ever xbox 360 mod last night and it went smoothly. You're greatly appreciated. Did a Jasper my next attempt will be a slim
I am so lucky to have come across a xenon on blades dash, I did an JTAG using 3 wires, upgraded the heatsink and now the GPU rans cooler than the CPU, 55°C and 65°C respectively. I am still using 480p AV cable, i think thermals will go up when I upgrade to 1080i component AV. Thanks so much to weekend modder here.
Suggestion: love your videos. Can you do a tutorial on using the ext_clk method on a Xenon Xbox? Seems like most people these days have updated their dashboards and can’t use JTAG anymore… It’d be awesome as this is newer and apparently stable. And there is not that much info out there.
Awesome tutorial! Just picked up a really nice Jasper and a Falcon over the weekend that I will try my hand at the RGH3. Does the wattage matter on the 22k ohm resistor? I see 1/4, 1/2, and 1 watt values available.
Thank you a lot for your detailed videos, I always wanted to mod my xbox 360, bought some components but the methods and names of those were so confusing I never understood how to do it. Thanks a bunch for explaining it step by step
Great video.. here how to know if you got a good swicthing diode or a fake one test take one end to AAA positive side diode on the bottom of the AAA battery ohm reader ground ohm reader on the other side positive if your reading 0.201 or higher there will be some leakage current if so it's a good one.. if you are not then it's a fake online diode might matter on glitch boot ups worked on a Jasper BB
Any advice on getting better boot times on BB jaspers. Seems even with a clean install they just aren't as reliable. May just stick to using matrix and coolrunner chios in all BB Japsers. More reliable.
Forgot what the reason was for these being ~favored for modding and that was a handful of years ago.... Do those reason(s)/features still stand or have they possibly been muted or appended to with mod-developments among other versions of the 360s?
Custom dashboards, emulators, and mod menus in games are still fun to play with. Big driver recently is a game known as "college football revamped" which I think is a mod/update to a 2014 football game that a bunch of people are way into.
Great vid and tutorial, I would have ordered one of your RGH3 part kits, but I in UK.. So i order of amazon - The 22 Ohm resistor - does it need to be a 1/4 or 1/2 watt .. Many thanks
*love your vids !* I just JTAG'd my 360 Jasper and wondered if and how to install a 1TB 2.5 HD internal ? I believe the Xbox uses FAT32 , which has capacity limits :( Is there anyway to do it ?
If I understand you correctly what I did was plugged the hdd internally Then formatted it through xbox system then it started working I’ve heard that people have gotten 2tb working
Just tried this on a BB jasper. Would not boot to xell. Checked soldering and stuff multiple times but no go. Windows 10 a problem? I read nand twice no problem and wrote ECC.
@@FreshLabs401 I'm using bottom point I finally got it to turn on but no xell do I need to reflash? It sounds like it quietly cycling fan motors but nothing happens black screen. I used a 10k as 22k wasn't working doing same thing after resolder points no longer shuts off instantly
Didn't know that was possible. What's the maximum size drive it can see? So the system sees and can manage among both at the same time? This total size capacity appears to be needed in my future.
@@That_Handle as far as I know, 2tb. Because you need to use FAT32 MBR formatting. You might be able to setup 2 partitions, but hadn’t tried that. I have tried 2 drives at once without a problem while in the Aurora custom dash.
@@Funkb0y , Where can I find that information for use in my planning where it comes to the file size required for a given game? I have quite a long list in front of me and looking to work smarter moreso than harder. No matter where I search I can't come up with file size basic information and it sure would be a lot easier to find rips than to have to wait out ripping my own from discs here = cut out that time consuming lengthy step for each and every disc that I have. What it comes down to is that I want to get my _entire_ library of discs onto mass storage as well as create multiple units for a LAN+online setup at home here.
I’m trying to use this method to rgh3 my 360, after I soldered everything and tried to read nand it only fills in half the boxes in nand info. I managed to write ECC and boot into xell reloaded and get my cpu key but when trying to create XeBuild image lots of warnings pop up and jrunner crashes. I checked my soldering continuity and everything looks fine. Does anyone know what I could be doing wrong? Thanks
Great video my friend thank you I've completed this rgh 3 on several trinity boads but have not tried it on a falcon or jasper I've got a few jasper boards but can't seem to read the nand would like to save them
Hi, great video.Yesterday I've done an RGH 3 on a trinity but I've confused inverting spi nand blue point with green point because I didn't look well schematics first. I've notice this after writing ecc. So I have a bad nand backup. Of course console after writing retail nand gives me red light and black screen. Could you help me? Only solution is donor nand? Thanks in advance.
Flashed xell to two 360s now , all following your video step for step , none of them boot to xell after flashing it across , any idea what to do other than throw them in the bin was done with pico flasher and your jrunner and extras
@ TheWeekendModder Great video I need help I install everything and I create the ECC and Write it to the console but now the console won't boot the only thing is the green light flashes and nothing else what I can do please help
Hello weekend modder I did a Jasper RGH 3.0 few months ago but I only used a 22k resistor. I noticed you used a diode also is it really important to use one?
It's a protection to current backflow, you run risk of damaging your console without it. Rgh3 hasnt been around long enough to really know what the long term likely good of that damage is without it. But the diode is like a 5 cent part. Worth it to me...
Yeah it's called the Xbox removal tool how come you don't have one. I've had two for over 10 years and they work great. They're a bit flimsy they should be made out of stiffer steel because they've been pretty easily but you can pop all five of those and one shot
These eyes of mine are starting to strain nowadays.... Anyone recommend a magnifying video screen for my workbench? A TOMLOV with a pair of articulating lights and a remote came up in my results and looks decent except for it not having enough platform/stage depth for consoles; but, I know nothing.
A lot of those helping hands things he had also come with a magnifying glass, I'm farsighted so my glasses make it tough to see up close but the magnifying glass makes it easy if you're looking for a cheap option.
Hello. Which one of them should the 1n4148 diode be used? There are several types of diodes that differ in characteristics. There are diodes with different mA numbers. What characteristics should there be?
Good morning, I went to do a solder at the tp7r3 point in the second solder but it ended up being damaged ... I wanted to know if there is another point to replace this tp7r3 point ??? thanks !! please inform me.
Hi pls help! I have a zephyr one and when I want to create Xebuild it always says Wrong CPU Key :Getting info from 192.168....... LockDownValue is 32 Wrong CPU Key
Good day Mr weekend modder I have a trinity slim my dashboard is 17511 I did the rgh 3 mod on my console it boots xell very fast but it's not booting dash board for nothing I tried many stuff I even downloaded your j runner with the 17511 kernel version but tha does not have the rgh3 function I paste the 17511 into the jrunner with extras tried it git the kernel to show up did the rgh3 on the xbox360 only booting xell not dashboard really need your help please
im having a hard time trying to solder to nand x or jr programmer wires to read the nands. Is there anything you can help me with to improve my soldering skills?
Can you make a video on zephyr xbox360 rgh2 new timmings by octal450 aka josh davidson?? Because i have one that i cannot do because no detailed videos tutorial of guide to do it bymyself
Hey, I just got done modding a jasper BB 512mb and everything works well except when I go into storage devices I do not see my internal memory anymore. It just shows the loading circle.(I've waited for awhile for it to show up) It never comes up. However when I put a HD or USB HD it will show up just fine (Will show the HD/USB HD and internal memory) Do you have any idea how to fix this? or has this ever happened to you? I just did 2 Jasper BB 512mb and they both have the same problem
I've got a 256 jasper, will boot xell perfectly instaboot everytime Booting the dash glitches instantly also but also hangs at the end of the xbox logo animation, just after it signed into the profile I created to test the console. No hdd fitted I'm stuck
Hi can you use the raspberry pico to flash nand of Corona 16mb no need for post fix adapter. I've seen another video where you rgh V3.0 without the need of a glitch chip. Could I do this using the raspberry pico, for this installation. Regards Andy
Quick question but if I Rgh my friends xbox that’s Flashed would It still be able to play backup games or would i have to re flash the dvd drive after thx ?
Did exactly the same procedure, but when I turn it on power button, the xbox 360 automatically turns off after 10 seconds. Do you have any ideas what it could be ???
Can you do a tutorial on a existing falcon or jasper console has already a rgh2 and convert it into rgh3, for those who has no copy of the original nand backup copy
@@TheWeekendModder thank you for the tutorial, uts just the same when you pdaye the dashbaoars to the latest, uts just you hav eto apply another step and check the rgh 2 then rgh3 on the right side.. tnx again sir
hello I would like to know what are the wattages that I have to choose for the different resistors for the RGH 3.0. should I take the smaller ones or the larger ones
Mi jasper quedó con arranques variados ,7-15-25-30 segundos, y a veces se queda en el logo de inicio de xbox 360 y de ahí no pasa.. que puedo hacer para solucionarlo? Saludos
Can u use the same wiring for the glitch chip on a xenon i have matrix v3 with crystal so will i have to desolder that and do the bridge on the glitcher
Thanks for tutorial sir, I just RGH 3 my jasper 16mb successfully but it's freezing after a few minutes of gameplay. Can you help with a method of solving these issues?
I have a RGH 360 that has stopped glitching. Is there a market to sell these? Like would anyone have any interest in buying it? I have no use for it anymore. I only used it to download games to try before I bought them. I have since owned a One S, One X, and now a Series X. I’m well past the 360s lifespan so I literally have no use for it.
Weekend modder, I did this same exact install on two big block Jasper Kronos, one works and glitches great but the other straight up turns off after 2 seconds! I re wrote the nand, checked the wiring and even re-did it but it keeps doing the same, at one point it booted normally for a couple of days but then went back to it. Can't find any solution! Any ideas? I can't get my hands on a jprogrammer or nandx so I'm just hoping eventually some pico support for writing chips is available as it seems my only option is to do a 1.2 install :(
@@XENON2028 where do you think could be? I checked literally everywhere and re did all the wiring yet the pattern for booting and not booting was completely random, without even moving it or touching it sometimes it will boot and sometimes would no
@@timoarrg hmm, if it boots sometimes its not a short.. i'm not sure whats happening, if you have discord I recommend joining the xbox 360 hub server and asking someone like octal450
Hello everbody , i wanted to ask U for help. Ive Done the create ECC and write ECC before i even connected the diode and reaistors to my Falcon. Can i continoue normaly and Connect the reaistors and everything and create the ECC the Second time ? Or have i bricked my console allready? Thank U for the Help and sorry for my Bad english!
question before I buy anything can I mod online and use mods? can I use mods for achievements? and can I get banned if I use mods or mod for achievements?
@@TheWeekendModder ok thank you for answering my questions also would you know the chance of being ban? And where could I buy this stealth service I've heard about it before but not sure where to buy it because I haven't done this yet
@@steezykane4738 the chance is a variable based on what you do. Personally the risk is high enough I would never use an account I cared about for modding. Sorry I don't keep up with stealth server details these days.
There are alternative points on the back of the motherboard you can solder to to make the top side look absolutely untouched. Did two falcons and they boot instantly.
Yea, fair point. I'll update the written guide with the DB1F1 alternate as an option for folks. For anyone interested in a kit that contains the resistor and diode you need you can get that here: weekendmodder.com/store/index.php?route=product/product&path=60&product_id=273
Where can i find info about those alternate points?
I've got a 256 jasper, will boot xell perfectly instaboot everytime
Booting the dash glitches instantly also but also hangs at the end of the xbox logo animation, just after it signed into the profile I created to test the console. No hdd fitted
I'm stuck
@@Trippy86117 Did your two copies of nand dumps match? You might have to reflash
@@JoeGoesx matched, re dumped, te flashed so many times....still not booting
Just did a Trinity in 20 mins, 1st time no issies
I actually just finished my second RGH for a jasper, broke the clk pad but learned how to repair the trace and got it working! Just ordered parts for a slim i picked up from your site to RGH 3
Thanks for making this man, I just killed my slim attempting the RGH 3 (that pll point is so tiny) but I still have an old falcon soI'm ready for round two! From what I've seen the points are a lot more reasonable, provided that I can scavenge a resistor and diode from somewhere.
Yah I won't mod a slim for rgh3 cause of that point. The phat consoles are easier for rgh3 but they are unstable still in beta. I did install on jasper it works great boots are fast. But ring of light is sometimes buggy
I modded my slim and it wasn't too bad. Just gotta be really careful, take your time and use flux. @@Tysman909
I really appreciate the work you put into this and your website. It made modding my Falcon go very smoothly.
Welcome back doing Xbox stuff, how many parts and pieces from you back in the day I guess I need to buy some more parts I still have a few of these old ones laying around. Thanks again, Max
Thank you... booted Xell first try! Two weeks ago I spent at least 8 hours trying to RGH1.2 this same Falcon with no luck at all. I didn't think this was going to work because the original firmware RROD'd with the wiring installed, before I flashed the glitch 3 ECC... Wow, this is great. 20 minutes and success vs 8 hours and failing miserably! Oh, also I used 33K ohm resistor because I didn't have 22K.
lol had some bad luck with rgh 1.2, got a jasper coming in so im probably going to try this. you've convinced me.
I have done multiple rgh installs with no issues but one I installed recently the coolrunner chip was bad it RROD on both consoles and one won't turn on properly anymore get 0022 which is smc. I think chip had short in it which took out southbridge
He's back HES BACK!!!! Absolute hero.
Thank you so much for this!! Ended up having to resolder the RGH wires like 5 times (im kinda new to this) but at the end it booted into Xell! Again thank you.
And for removing all those screws I bought a little cheap $30 electric cordless drill more or less but it's tiny it weighs like 1 lb. Save so much time on the hundreds of councils I had to open and close. Back when you can make money and actually repairing these and reselling them. Did it out of my home during the recession and I was kind of fortunate that during the recession this kind of service was needed cuz I could make way more money than at any job available at the time even with a two year computer networking degree.
thanks so much for this video, i'll try my first rgh in my console and your video is amazing! let me lucky. Brazil here.
deu certo irmão?
Just ordered a kit!!! Awesome price and thanks for the help!
Magical. I just got your PHAT RGH3 kit and Xell booted first time. Really cool. Now off to see what this thing can do!
King is back, i learned to rgh watching your tutorials years ago
Thanks for a great tutorial. Just did the rgh3. 0 on a falcon 16mb and perfect. Instant boot everytime so far. I didn't have high expectations for the 3.0 but truthfully, it's turned out better than the rgh1. 2 jasper's in my possession, so pretty damn good. Thanks.
Thanks for your detailed tutorial. I did my first ever xbox 360 mod last night and it went smoothly. You're greatly appreciated. Did a Jasper my next attempt will be a slim
Glad I could help
I am so lucky to have come across a xenon on blades dash, I did an JTAG using 3 wires, upgraded the heatsink and now the GPU rans cooler than the CPU, 55°C and 65°C respectively. I am still using 480p AV cable, i think thermals will go up when I upgrade to 1080i component AV. Thanks so much to weekend modder here.
A bottle of Mountain Dew on the table while he's working on an XBOX....
~wipes away tear~
SUCCESS! Thanks for all your help! I got a few tools from ya too. I really apricate it!
Thanks alot my Man love this type of videos please keep it up
@TheWeekendModder some Falcons and Jasper works only with a 10k ohm Resistor. Thanks for the movie. Greets from Germany
Suggestion: love your videos.
Can you do a tutorial on using the ext_clk method on a Xenon Xbox? Seems like most people these days have updated their dashboards and can’t use JTAG anymore…
It’d be awesome as this is newer and apparently stable. And there is not that much info out there.
Awesome tutorial! Just picked up a really nice Jasper and a Falcon over the weekend that I will try my hand at the RGH3. Does the wattage matter on the 22k ohm resistor? I see 1/4, 1/2, and 1 watt values available.
1/4th watt is fine.
Thank you a lot for your detailed videos, I always wanted to mod my xbox 360, bought some components but the methods and names of those were so confusing I never understood how to do it.
Thanks a bunch for explaining it step by step
this is what I looked for :P
Are you not utilizing the alternate DB1F1 point for the sake of showing the install on the original point?
Great video.. here how to know if you got a good swicthing diode or a fake one test take one end to AAA positive side diode on the bottom of the AAA battery ohm reader ground ohm reader on the other side positive if your reading 0.201 or higher there will be some leakage current if so it's a good one.. if you are not then it's a fake online diode might matter on glitch boot ups worked on a Jasper BB
Any advice on getting better boot times on BB jaspers. Seems even with a clean install they just aren't as reliable. May just stick to using matrix and coolrunner chios in all BB Japsers. More reliable.
Forgot what the reason was for these being ~favored for modding and that was a handful of years ago.... Do those reason(s)/features still stand or have they possibly been muted or appended to with mod-developments among other versions of the 360s?
Custom dashboards, emulators, and mod menus in games are still fun to play with. Big driver recently is a game known as "college football revamped" which I think is a mod/update to a 2014 football game that a bunch of people are way into.
@@TheWeekendModder ,
In particular, these model of 360s performance versus other models as a pertains to the original post?
Hello. Please, can you tell me where to buy the JR PROGRAMMER V2 case that can I see in video?
There is no Jr programmer case, in this video I use a Nandx
Thank you bro for the tutoriel
Great vid and tutorial, I would have ordered one of your RGH3 part kits, but I in UK.. So i order of amazon - The 22 Ohm resistor - does it need to be a 1/4 or 1/2 watt .. Many thanks
Never mind I see you answered someone in comments bellow. for same question!! lol
Once you add solder to any stranded wire regardless where it is at it will become a lot stiffer at it's connection point!
*love your vids !* I just JTAG'd my 360 Jasper and wondered if and how to install a 1TB 2.5 HD internal ?
I believe the Xbox uses FAT32 , which has capacity limits :(
Is there anyway to do it ?
If I understand you correctly what I did was plugged the hdd internally Then formatted it through xbox system then it started working I’ve heard that people have gotten 2tb working
@@matthewjames867
Yeah that's what I did eventually but thanks anyway ..
Now where to get ISOs ?
the xbox does not use fat32, it uses fatx (or xtaf)
Looks great
Just tried this on a BB jasper. Would not boot to xell. Checked soldering and stuff multiple times but no go. Windows 10 a problem? I read nand twice no problem and wrote ECC.
UPDATE: So i used just wire, top point PLL, 10 MHZ setting in JRunner. Xell loaded instantly
Mine turns on shuts instantly off as soon as remove wires resistor's diode and flash stock back it boots instant but never xell
@@FreshLabs401 does same if try without wires on off flash my stock boom instant stock boot
You've gotta have a bad solder point. Or try the bottom PLL point
@@FreshLabs401 I'm using bottom point I finally got it to turn on but no xell do I need to reflash? It sounds like it quietly cycling fan motors but nothing happens black screen. I used a 10k as 22k wasn't working doing same thing after resolder points no longer shuts off instantly
hello I don't have the resistors you installed.
But I have the 1.2v regulators, will you have a diagram to install them? Thank you
I followed your tutorial, but after writting the ECC file my Xbox just stays with a blinking green light in the middle and never boots into Xell.
you write rgh 3 ecc 27mhz? please verify , maybe the issue
yeah ,same problem
Perfect timing as the parts for this are on the way already lol
hi thanks for the great video one question do you know how to install 2 hdd in the console? i want to do a 4 tb console
🤔
You can do an external drive, even 2 externals at the same time if you wanted.
Didn't know that was possible. What's the maximum size drive it can see? So the system sees and can manage among both at the same time? This total size capacity appears to be needed in my future.
@@That_Handle as far as I know, 2tb. Because you need to use FAT32 MBR formatting. You might be able to setup 2 partitions, but hadn’t tried that. I have tried 2 drives at once without a problem while in the Aurora custom dash.
@@Funkb0y ,
Where can I find that information for use in my planning where it comes to the file size required for a given game? I have quite a long list in front of me and looking to work smarter moreso than harder. No matter where I search I can't come up with file size basic information and it sure would be a lot easier to find rips than to have to wait out ripping my own from discs here = cut out that time consuming lengthy step for each and every disc that I have. What it comes down to is that I want to get my _entire_ library of discs onto mass storage as well as create multiple units for a LAN+online setup at home here.
@TheWeekendModder Is there any advantages or disadvantages to using Kynar wire for RGH3?
I’m trying to use this method to rgh3 my 360, after I soldered everything and tried to read nand it only fills in half the boxes in nand info. I managed to write ECC and boot into xell reloaded and get my cpu key but when trying to create XeBuild image lots of warnings pop up and jrunner crashes. I checked my soldering continuity and everything looks fine. Does anyone know what I could be doing wrong? Thanks
Thanx Master ♥️💪
Can you make also a full video on a from rgh 1.2 to rgh 3.0?? Because my jasper cbox 360 just bought it for a 2nd hand u dont have the original dumps
Great video my friend thank you I've completed this rgh 3 on several trinity boads but have not tried it on a falcon or jasper I've got a few jasper boards but can't seem to read the nand would like to save them
Hi, great video.Yesterday I've done an RGH 3 on a trinity but I've confused inverting spi nand blue point with green point because I didn't look well schematics first. I've notice this after writing ecc. So I have a bad nand backup. Of course console after writing retail nand gives me red light and black screen. Could you help me? Only solution is donor nand? Thanks in advance.
Flashed xell to two 360s now , all following your video step for step , none of them boot to xell after flashing it across , any idea what to do other than throw them in the bin was done with pico flasher and your jrunner and extras
@
TheWeekendModder Great video I need help I install everything and I create the ECC and Write it to the console but now the console won't boot the only thing is the green light flashes and nothing else what I can do please help
Thank you weekend moder ! I've done my 3rd falcon but it somehow keeps freezing after 5minutes. Any recommendations ?
I think you need to go back to rgh 1.2
for pin 5 why use the header, just solder the jrunner to any ground casing
Hello weekend modder I did a Jasper RGH 3.0 few months ago but I only used a 22k resistor. I noticed you used a diode also is it really important to use one?
It's a protection to current backflow, you run risk of damaging your console without it. Rgh3 hasnt been around long enough to really know what the long term likely good of that damage is without it. But the diode is like a 5 cent part. Worth it to me...
Yeah it's called the Xbox removal tool how come you don't have one. I've had two for over 10 years and they work great. They're a bit flimsy they should be made out of stiffer steel because they've been pretty easily but you can pop all five of those and one shot
I've got several in a drawer somewhere. I don't like them. They are not easy to use.
These eyes of mine are starting to strain nowadays.... Anyone recommend a magnifying video screen for my workbench? A TOMLOV with a pair of articulating lights and a remote came up in my results and looks decent except for it not having enough platform/stage depth for consoles; but, I know nothing.
A lot of those helping hands things he had also come with a magnifying glass, I'm farsighted so my glasses make it tough to see up close but the magnifying glass makes it easy if you're looking for a cheap option.
Hello. Which one of them should the 1n4148 diode be used? There are several types of diodes that differ in characteristics. There are diodes with different mA numbers. What characteristics should there be?
Good morning, I went to do a solder at the tp7r3 point in the second solder but it ended up being damaged ... I wanted to know if there is another point to replace this tp7r3 point ??? thanks !! please inform me.
Your solder tip could use cleaning or replace
Hi pls help!
I have a zephyr one and when I want to create Xebuild it always says Wrong CPU Key
:Getting info from 192.168.......
LockDownValue is 32
Wrong CPU Key
Good day Mr weekend modder I have a trinity slim my dashboard is 17511 I did the rgh 3 mod on my console it boots xell very fast but it's not booting dash board for nothing I tried many stuff I even downloaded your j runner with the 17511 kernel version but tha does not have the rgh3 function I paste the 17511 into the jrunner with extras tried it git the kernel to show up did the rgh3 on the xbox360 only booting xell not dashboard really need your help please
it appears to me the wrong cpu key, what should I do? i have xbox 360 fat/jasper 512
Hello friend, is the CPU_PLL point duplicated somewhere? I accidentally tore off a piglet, now I can't solder.
im having a hard time trying to solder to nand x or jr programmer wires to read the nands. Is there anything you can help me with to improve my soldering skills?
when do you think you will come in stock with the parts in your bio rgh3 phat parts i could really use it
Can you make a video on zephyr xbox360 rgh2 new timmings by octal450 aka josh davidson?? Because i have one that i cannot do because no detailed videos tutorial of guide to do it bymyself
Do you have to transfer the contents of the flash drive to the hdd? For the xex menu to stay on the system?
Probably
Do the switch placements matter on the J runner? I haven't touched them but know they have a purpose on other rgh's
Hey, I just got done modding a jasper BB 512mb and everything works well except when I go into storage devices I do not see my internal memory anymore. It just shows the loading circle.(I've waited for awhile for it to show up) It never comes up. However when I put a HD or USB HD it will show up just fine (Will show the HD/USB HD and internal memory) Do you have any idea how to fix this? or has this ever happened to you? I just did 2 Jasper BB 512mb and they both have the same problem
I've got a 256 jasper, will boot xell perfectly instaboot everytime
Booting the dash glitches instantly also but also hangs at the end of the xbox logo animation, just after it signed into the profile I created to test the console. No hdd fitted
I'm stuck
Hi can you use the raspberry pico to flash nand of Corona 16mb no need for post fix adapter. I've seen another video where you rgh V3.0 without the need of a glitch chip. Could I do this using the raspberry pico, for this installation. Regards Andy
Quick question but if I Rgh my friends xbox that’s Flashed would It still be able to play backup games or would i have to re flash the dvd drive after thx ?
Did exactly the same procedure, but when I turn it on power button, the xbox 360 automatically turns off after 10 seconds. Do you have any ideas what it could be ???
Found the problem. It was the resistor. Just solded the wire directed to the 2 points (without the resistor) and the vg went back to normal. 👍👍
I want to ask a question. Is 2012 xbox 360 sim corona or trinity?
So no more glitch chip required? Is there any advantage to previous RGH methods, and should we upgrade to RGH 3 (remove glitch chip & reflash)?
No advantage - if your current RGH boots well then no need to change it.
Can you do a tutorial on a existing falcon or jasper console has already a rgh2 and convert it into rgh3, for those who has no copy of the original nand backup copy
I did a video of RGH2 to RGH3 upgrade for a Corona - the process and steps are mostly the same. Check that one out.
@@TheWeekendModder thank you for the tutorial, uts just the same when you pdaye the dashbaoars to the latest, uts just you hav eto apply another step and check the rgh 2 then rgh3 on the right side.. tnx again sir
hello I would like to know what are the wattages that I have to choose for the different resistors for the RGH 3.0. should I take the smaller ones or the larger ones
0.25 watts
NoobQ: What Solder gauge you using here? Thanks!
Shouldn't matter. Just try to get thin and rosin core for electrical and itll work.
I still currently own a rgh 2.0 Xbox 360. Would there be any reason to plug it back in and run it again?
Mine is just flashing green light after writing ecc can anyone help
Mi jasper quedó con arranques variados ,7-15-25-30 segundos, y a veces se queda en el logo de inicio de xbox 360 y de ahí no pasa.. que puedo hacer para solucionarlo? Saludos
Ese debe ser un problema de la consola en sí ya que si no glitcheara correctamente el rgh la consola directamente no bootearia
Can u use the same wiring for the glitch chip on a xenon i have matrix v3 with crystal so will i have to desolder that and do the bridge on the glitcher
?!?!?!!? what glitch chip
Is a 22k ohm 1 watt resistor ok to use
yes
Thanks for tutorial sir, I just RGH 3 my jasper 16mb successfully but it's freezing after a few minutes of gameplay. Can you help with a method of solving these issues?
it’s the soldering, I had this exact problem as well which disappeared when I resoldered everything
I have a RGH 360 that has stopped glitching. Is there a market to sell these? Like would anyone have any interest in buying it? I have no use for it anymore. I only used it to download games to try before I bought them. I have since owned a One S, One X, and now a Series X.
I’m well past the 360s lifespan so I literally have no use for it.
Weekend modder, I did this same exact install on two big block Jasper Kronos, one works and glitches great but the other straight up turns off after 2 seconds! I re wrote the nand, checked the wiring and even re-did it but it keeps doing the same, at one point it booted normally for a couple of days but then went back to it. Can't find any solution! Any ideas? I can't get my hands on a jprogrammer or nandx so I'm just hoping eventually some pico support for writing chips is available as it seems my only option is to do a 1.2 install :(
short
@@XENON2028 short... Short what?
@@timoarrg there is a short on the motherboard
@@XENON2028 where do you think could be? I checked literally everywhere and re did all the wiring yet the pattern for booting and not booting was completely random, without even moving it or touching it sometimes it will boot and sometimes would no
@@timoarrg hmm, if it boots sometimes its not a short.. i'm not sure whats happening, if you have discord I recommend joining the xbox 360 hub server and asking someone like octal450
Are you soldring any chip to xbox 360 phat motherbord? 😮
for u runner glitch2 i only see CR4 no RGH3 how do i get RGH3
🐐
Are u able to make a video on how to mod a Winchester 360e mother board pls
Winchester not hackable
You can't
I K*lled mine... it glitched midway XELL and now it doesn't turn on
Hello everbody , i wanted to ask U for help. Ive Done the create ECC and write ECC before i even connected the diode and reaistors to my Falcon. Can i continoue normaly and Connect the reaistors and everything and create the ECC the Second time ? Or have i bricked my console allready? Thank U for the Help and sorry for my Bad english!
My Jrunner was marked as having a backdoor, should I be worried?
nah ur good
but if you are to worried do the rgh then when you are done just delete it
Hey mate my console after writing ecc turning it on it powers off instantly what have I done wrong
short!
Can you please do a rgh3 4gb Corona with out the post fix
Any alternate to the r3p7 i ripped the point off?
Do you know of a fix to bypass or reset xbox 360 slim after being banned/locked/blocked by Microsoft online? It will not play games.
You need a new KV they sell for about 3 usd
@@user-defined-p2v what is a KV? To vague of an answer
I bought a blocked Xbox Slim for $50 and I want it playable. Why is Xbox creator so greedy?
What size heat shrink tubing do you use?
1/4 inch
question before I buy anything can I mod online and use mods? can I use mods for achievements? and can I get banned if I use mods or mod for achievements?
Yes, you can mod online using a stealth service. Yes, you can unlock achievements. Yes, you run the risk of being banned (both account and console)
@@TheWeekendModder ok thank you for answering my questions also would you know the chance of being ban? And where could I buy this stealth service I've heard about it before but not sure where to buy it because I haven't done this yet
@@steezykane4738 the chance is a variable based on what you do. Personally the risk is high enough I would never use an account I cared about for modding.
Sorry I don't keep up with stealth server details these days.
are these resistors completely necessary ?
Yes, for protecting the cpu mainly
yeah
Xbox 360 2013 -05 - 18 have rgh ?
time to dust off my "elite" falcon.
will this work with xenons - the practical reasons
Weekend modder doesn't support it so you'll have to go on your own, but I doubt it, xenons are a headache for rgh
Hate to be lazy but anyone know someone who can do this for me?
My hands are not steady enough for soldering.