Hp 840 G5 - not charging but working on the battery - ISL 9538H diagnose steps

Поділитися
Вставка
  • Опубліковано 21 лис 2024

КОМЕНТАРІ • 90

  • @tinkmarshino
    @tinkmarshino 6 місяців тому +25

    over the years you have taught this 72 year old how to test and fix some lap top problems.. I am still learning to go further through your most excellent video's.. Thanks for the fun Sorin!!

  • @isahizhenfahm6576
    @isahizhenfahm6576 6 місяців тому +13

    I came into this channel with no knowledge of how to fix a laptop. But what I've leant so I can't even begin to describe it or mention it.
    Sir you're a LEGEND 💯🎉🎉🎉

    • @TheHalo14aus
      @TheHalo14aus 6 місяців тому

      Me too, how wonderful is Sorin :)

  • @BryanPetifer
    @BryanPetifer 6 місяців тому +8

    Well done Sorin good job as always! I want to say hello to Mike your special customer as I did watch the earlier video and Mike and I worked together for many years so it was good to see him appear on your channel after all these years

  • @badonrani4059
    @badonrani4059 6 місяців тому +4

    King of repair for learner is Mr Sorin our legend and teacher

  • @winlose3073
    @winlose3073 6 місяців тому +1

    I can tell even without that spare board Sorin would have mastered it again probably he would have injected something like 3.3 v or 1 v at that LDO output to follow the current anyway. Great job Sorin.

  • @aliassaila8037
    @aliassaila8037 6 місяців тому +3

    Hi Mr Sorin,
    The IC is ISL9538H, the datasheet is for ISL95338 and the video title indicates ISL 95388. Nevertheless,
    the video goal is clearly achieved 👏 👌

  • @ovidiuovidius
    @ovidiuovidius 6 місяців тому +3

    Foarte bine, am avut și eu o problemă mult mai complexă în care IC era im scurt plus un CI ESD in scurt și BQ era mort... Nu vedea bateria, nu încarca, dar până la urmă l-am rezolvat schimbând toate cele trei cipuri. Sunt grele aceste reparații mai ales când nu ai piese de schimb și nici placă donator.

  • @Electronics000
    @Electronics000 6 місяців тому +1

    One of the problems with the INTERSIL 9538H is that the microcontroller does not charge the battery. Thanks for the video

  • @alsoncomputertechnology3445
    @alsoncomputertechnology3445 6 місяців тому +1

    I think I will fix my today it's 2 days now,I got a hint,.
    Thank you sir for this wonderful work, I really appreciate🎉 ❤

  • @BasicComputerRepair
    @BasicComputerRepair 6 місяців тому +2

    I can't believe this. I am working on the exact same chip with the same issue! Unfortunately, I don't have a spare.

  • @Trex0Pol
    @Trex0Pol 6 місяців тому

    These videos are amazing. I have very low experience, but thanks to your videos, I was already able to fix two devices, both of which had problems with power supply (faulty caps and shorted diode)
    I think I would also be able to fix a broken laptop, but didn't get my hand on any yet. I had once diagnosed a laptop and I think even correctly, but didn't want to spend any money on it since it didn't have any value.

  • @jacobtaiwo1765
    @jacobtaiwo1765 5 місяців тому

    Good morning sir my name is TAIWO from Nigeria, I love the way you teach, I will like to be lol you sir

  • @muffinvapes
    @muffinvapes 6 місяців тому +2

    Nice vid mate I've been watching you for about 3 years
    This was a one of the nicest vids mate

  • @Stiffler2k4
    @Stiffler2k4 6 місяців тому +3

    We had a lot G5 in our company running. Fix for this problem was pressing "Power +F6" for 30 seconds.

    • @vandehoek
      @vandehoek 6 місяців тому

      Thanks, do you have more tips for the G5 and G6? I have a lot of these models with almost the same issues.

    • @Stiffler2k4
      @Stiffler2k4 6 місяців тому

      @@vandehoek
      - Holding the power button pressed for 15 seconds
      - Bios update
      - loading setup defauls
      - in case of a bluescreen --> RAM test
      if RAM is ok and bluescreen appears even after a fresh installation of Windows, board has an issue.

    • @Fokas_World
      @Fokas_World 6 місяців тому

      Do we press power + F6 when laptop is on or switch off first/remove battery?

    • @Stiffler2k4
      @Stiffler2k4 6 місяців тому

      @@Fokas_World What exactly is the issue you encounter?
      The device should be switched off and power supply disconnected. Just try it. Nothing will be deleted or something. Maybe the device will do some power cycles itself and then boot up.

    • @Fokas_World
      @Fokas_World 5 місяців тому

      @@Stiffler2k4 this actually kinda worked. thanks soo much

  • @darrenstrathdee7425
    @darrenstrathdee7425 6 місяців тому +1

    The ldo voltage is internal to the intersil chip. You could check the gate for 25v. Thats what you should have.

  • @vincentvalentine5900
    @vincentvalentine5900 6 місяців тому

    Yang ang t-shirt na di nakakahiyang suotin! Baka naman..hehe

  • @rongray8934
    @rongray8934 6 місяців тому

    I buy some of Sorin's rosin. I hope it works well. I can't wait to try it out. You have such great videos.

  • @prabhakarodiavlogs
    @prabhakarodiavlogs 6 місяців тому

    Nice diagnosis

  • @JamesDavis-y9z
    @JamesDavis-y9z 6 місяців тому

    Love these type of repairs the most ❤

  • @harryemerike3205
    @harryemerike3205 6 місяців тому

    Thanks for sharing, really learning a lot from you

  • @alessandrovirdis520
    @alessandrovirdis520 6 місяців тому +1

    Another proper nice repair💪🏻💪🏻

  • @Dohcoms
    @Dohcoms 6 місяців тому +1

    Great work, nice lesson!

  • @cyberpeque
    @cyberpeque 6 місяців тому

    I posted on your forum a very similar issue on a HP ZBook Firefly 15. Those ISL chips are as crappy as BQ chips.

  • @Yarogum
    @Yarogum 6 місяців тому

    просто великолепно интересно и информативно.Спасибо Вам

  • @g4z-kb7ct
    @g4z-kb7ct 6 місяців тому

    Don't forget to look at the part designators on the PCB... D6035... that small part is clearly a double diode ;-)

  • @alejandrom.692
    @alejandrom.692 6 місяців тому +1

    Hi Sorin, Why the battery dont charge with 13v direct? Thank you so much.

  • @OkwalingaYolam
    @OkwalingaYolam 6 місяців тому

    Grt job, special salute

  • @RubelTelecom-Mirpur1
    @RubelTelecom-Mirpur1 Місяць тому

    you do not use flux for chip soldering ?

  • @tyrellwreleck4226
    @tyrellwreleck4226 6 місяців тому +3

    25:15 inserting the nvme without unplugging the charger is kinda scary

  • @mrelectromaniac6886
    @mrelectromaniac6886 5 місяців тому

    Very good work 👍

  • @rfr653
    @rfr653 6 місяців тому

    Good job mate

  • @dmisi1
    @dmisi1 6 місяців тому

    very nice job

  • @BodiAttilaAlexandru
    @BodiAttilaAlexandru 6 місяців тому

    Did the power supply clicked when the charger was plugged at 23:38 or something else clicked? Also towards the end at 26:54 there was another click, even though the current doesn't exceeds the power supply limit.

  • @roche1237
    @roche1237 6 місяців тому

    Well done Sorin🎉🎉🎉🎉

  • @cfamozcomputermetropolis7191
    @cfamozcomputermetropolis7191 6 місяців тому

    MAster sorin, this is pretty nice repair video, please I need help I try to get thermal cam but it is crazy expensive to get to me in Nigeria, sometimes I can't see some bad Ic due to they don't produce much heat I can't see it with petrol to fix it. I need help.

    • @Holycurative9610
      @Holycurative9610 6 місяців тому +1

      Here's some help and advice. You have to do what everyone else does and work hard and save some money every week until you have enough to buy new equipment. When I first started repairing I used IPA and a small brush to highlight overheating components, it was about 10 years before I got a thermal camera and that was because the prices had dropped and they were no longer a luxury. I started my business 20ish years ago with a borrowed soldering iron, an old multimeter and a set of cheap screwdrivers and upgraded when I could afford to. People will only give you money if you repair their items, they don't give it you for free...

  • @budimana3820
    @budimana3820 6 місяців тому

    nice work...

  • @cammysimon8578
    @cammysimon8578 3 місяці тому

    The customer use the charger to charge the battery, dirrect charging with laptop charger LOL😂

  • @lucianofz788
    @lucianofz788 5 місяців тому

    Real master

  • @jonathaningram4672
    @jonathaningram4672 6 місяців тому

    A fiddly one to fix but Sorin spotted it. excellent and definitely a pizza

  • @MrBadboyrus
    @MrBadboyrus 3 місяці тому

    Hello, i have same laptop, but i have different problem, its charging fine and works on battery too, but its cut cpu frequency to 0.4ghz, and it looks like one phase of power on cpu is not working, maybe you had such situation and know where could be problem?

  • @clivecottam1509
    @clivecottam1509 6 місяців тому

    Have the exact same issues with a dell and msi gaming laptop, where it detects the charger but refuses to charge the battery, for the msi only when i remove the battery and the reset the cmos then it would charge the battery but it i remove the charger and then plug it back again it will no longer charge, the msi would detect the but will not charge and the battery will not rundown when in use and plugged in...

  • @89jacek
    @89jacek 6 місяців тому

    how u know from what pin start detect isue bq or intersilk? how to find sequence pin?

  • @xkupi
    @xkupi 6 місяців тому

    I remember this 😁

  • @techman6431
    @techman6431 6 місяців тому

    Superb ⚡️👌🏻

  • @Hejar485
    @Hejar485 6 місяців тому

    I like sonny vaio ❤

  •  6 місяців тому

    Can you tell me your isolate tapes inner diameter? (The blue inner ring inside)

  • @elkanayunana2182
    @elkanayunana2182 6 місяців тому

    Cool

  • @rtx3080-js8qi
    @rtx3080-js8qi Місяць тому

    should be recall they all have same problem from g3 and up

  • @essamsiyam
    @essamsiyam 6 місяців тому +1

    I have this laptop with no power after replacing the isl chip it works but not picture on internal screen it shows on hdmi but not the internal one even i tested the screen on a same laptop and it worked fine
    Also i have backlight working but no image
    Any help

    • @alexgreis
      @alexgreis 8 днів тому

      Did you find the solution to this problem? Tyvm.

  • @MouhM-fd1yt
    @MouhM-fd1yt 6 місяців тому

    Goooood

  • @benzyblenaru9602
    @benzyblenaru9602 6 місяців тому

    Why don't you stick a thermo pad on the part?

    • @draganbodrozic
      @draganbodrozic 6 місяців тому +1

      The pad makes the part will be cooled faster.

  • @walidizzat1048
    @walidizzat1048 6 місяців тому

    ❤❤❤

  • @warzonemobile5574
    @warzonemobile5574 6 місяців тому

    😎

  • @Holycurative9610
    @Holycurative9610 6 місяців тому

    Laptop plugged in and charging so it's probably not a good idea to install the drive. Tut tut...... I'm surprised more people in the comments haven't pointed this out although I've done the same before🤣🤣 but I shouldn't!!

  • @beer_goggler
    @beer_goggler 6 місяців тому

    Who knew SSDs were hotswap

  • @Matthew_T24
    @Matthew_T24 6 місяців тому

    Nicee🔥

  • @lucataszarek8782
    @lucataszarek8782 6 місяців тому

    Hello🤝Good job it's time for pizza 🍕🍕🍕🍕🍕👏👏👏👏👍👍👍👍👋👋👋👋👋

  • @maklogetrich2378
    @maklogetrich2378 6 місяців тому +1

    wrong IC datasheet

  • @sharifkabuma8063
    @sharifkabuma8063 2 місяці тому

    It can charge when computer is of

  • @misanthrop7489
    @misanthrop7489 6 місяців тому +1

    9538 still is not 95338! Wrong datasheet again

  • @MF-jo6jt
    @MF-jo6jt 6 місяців тому

    Nobody noticed on nvme:
    WW II N/A

  • @Kicm2Kicm2
    @Kicm2Kicm2 3 місяці тому +1

    Cl esd in scurt si bk Era mort

  • @c1q3
    @c1q3 6 місяців тому +6

    why are there bots chatting in comments section?

    • @kasimbilcevic2010
      @kasimbilcevic2010 6 місяців тому +2

      I just wanted to ask the same question...
      P.S. I just reported all of them.

    • @moldo8811
      @moldo8811 6 місяців тому +2

      The bots are interested in electronics repairs too, man. This is like medical information for them.

    • @c1q3
      @c1q3 6 місяців тому

      @@moldo8811 its bad for channel. youtube will think that owner is boosting audience and will blacklist this content.

    • @moldo8811
      @moldo8811 6 місяців тому +1

      @@c1q3 yeah I know man. I report them too everytime I see bots.

  • @uniqueangel
    @uniqueangel 6 місяців тому

    Only one ram of memory, wow he loose performance because it is on single channel

  • @ETERNAL_MODS
    @ETERNAL_MODS 6 місяців тому

    Nice Job Boss

  • @Pihmusik-PiCh-Expert
    @Pihmusik-PiCh-Expert 6 місяців тому

    • @Pihmusik-PiCh-Expert
      @Pihmusik-PiCh-Expert 6 місяців тому

      Very good job

    • @Pihmusik-PiCh-Expert
      @Pihmusik-PiCh-Expert 6 місяців тому

      I've been watching your videos from the beginning and I'm learning a lot from you. Thank you very much for teaching!!!!
      I wish you as many successful repairs as possible and joy in what you do.
      Much health to you and your loved ones.

  • @cephasbanda1531
    @cephasbanda1531 6 місяців тому

    Nice job