I'm sorry. It's my mistake. I usually assemble the SFF system, so I don't overclock the parts, so I missed this part. May I pin your opinion to the top for information sharing?
@@Sanzhar94 I don't know why, but I couldn't access the official website of JGINYUE. I received the BIOS file from the seller, but it was all the same version.. So I couldn't make a comparison.
May I ask if its bios has pcie power saving settings, aspm, and L1 options? (I bought an affordable motherboard from another brand. Although it has aspm, it only has L0s options, not L1), thanks
i just got this motherboard. i came across your video in search of a manual. luckily i figured out everythinng i needed to (i hope). i put it in my case, added a GPU, ram and a sata drive. booted into the bios. updated it and plugged a windows 11 usb dongle into the back of the motherboard. when i restart the computer, the windows logo comes up and it loads from the usb like im used to. only that it suddenly shuts down the pc after maybe 20 seconds and restarts. it goes into a never ending loop if trying to install windows and restating. i replaced the ram from my workstation to test the ram. i tested with or without GPU, tried different usb ports. everything points to the same conclusion that it goes into this weird loop of loading windows and crashing /restarting. im using pretty old PSU to be fair. could it be that the 4 pin cpu connector isnt enough. a quick search told me that a 4 pin cpu connector generated around 192 watts. my i5 12400f has a tdp of 115w so i should be good. i dont know what i could change in the bios to make this work... any help would be appreciated a lot!
I don't think there's a clear answer I can give you. Maybe it's simply because you don't use the 8pin CPU connector, or maybe it's because it's less complete because it's an affordable board. I think the seller will get the answer they want if they ask the manufacturer.
Aesthetically-speaking the board looks nice. But man still a no buy for me due to following reasons. I hope JGINYUE will improve their design in the future. 1. No VRM sensor 2. No wifi module included 3. No place for CMOS battery on board so any buyer had to do ass solution like stripping wire & taping them together 4. XMP will only work if you lock 1.35V on RAM
I Notice you have the AXP120-X67 cooler, can you tell me which orentation that cooler fit in this motherboard? it seem that in your benchmarking the cooler is very bent.
안녕하세요 이번에 JGINYUE B760I에 Thermalright AXP120-X67 쿨러를 장착하여 ITX를 빌드 중인데 램 간섭이 걱정되 램을 구매하지 못하고 있는데 혹시 영상에서 사용하신 램 이름 좀 알 수 있을까요? 제가 구매한 보드는 D5 이긴 한데 큰 차이가 없을 것 같아 질문 남깁니다!
absolutely not, I used B660i before with old Bios even it didn't have RGB entry. Today I just updated to the BIOS version April 7 similar to the one in the video, now the RGB function can be adjusted but only for 1 color, not a rainbow. The good thing after RGB was opened, it was able to recognize Adata D50 RGB ram. It will probably never have its own driver, I've been waiting almost 1 year
Why you don't tell about XMP issue? If you choose XMP, you ought to lock 1.35v on ram, or xmp doesn't work. Only with forced 1.35v!
I'm sorry. It's my mistake. I usually assemble the SFF system, so I don't overclock the parts, so I missed this part.
May I pin your opinion to the top for information sharing?
@@DalraeMyo yup, thanks)) I have same mobo, and build with 12400F/4060Ti in small case
@@Sanzhar94 Thank you. And once again, I'm sorry that I didn't recognize the information about RAM voltage in advance.
@@DalraeMyo what about bios downgrade? 🤔
@@Sanzhar94 I don't know why, but I couldn't access the official website of JGINYUE. I received the BIOS file from the seller, but it was all the same version.. So I couldn't make a comparison.
Thank you for helping in the bios❤
Very high quality unboxing! thank you!
Please do more of those Chinese products, I am sure everyone would love that!
White PCB👍! Can lookout for Jginyue brand next time..🤓
It's beautiful!
No dedicated cmoss battery slotttt??? :o
what will happen if we forgot to install the battery?
cannot save bios settings
Theodore Walks
Does Bios Update really require to unlock XMP on this board? or just setting the voltage on ram to 1.35v is enough?
May I ask if its bios has pcie power saving settings, aspm, and L1 options? (I bought an affordable motherboard from another brand. Although it has aspm, it only has L0s options, not L1), thanks
i just got this motherboard. i came across your video in search of a manual. luckily i figured out everythinng i needed to (i hope). i put it in my case, added a GPU, ram and a sata drive. booted into the bios. updated it and plugged a windows 11 usb dongle into the back of the motherboard. when i restart the computer, the windows logo comes up and it loads from the usb like im used to. only that it suddenly shuts down the pc after maybe 20 seconds and restarts. it goes into a never ending loop if trying to install windows and restating.
i replaced the ram from my workstation to test the ram. i tested with or without GPU, tried different usb ports. everything points to the same conclusion that it goes into this weird loop of loading windows and crashing /restarting.
im using pretty old PSU to be fair. could it be that the 4 pin cpu connector isnt enough. a quick search told me that a 4 pin cpu connector generated around 192 watts. my i5 12400f has a tdp of 115w so i should be good. i dont know what i could change in the bios to make this work... any help would be appreciated a lot!
I don't think there's a clear answer I can give you. Maybe it's simply because you don't use the 8pin CPU connector, or maybe it's because it's less complete because it's an affordable board. I think the seller will get the answer they want if they ask the manufacturer.
Keebler Mountain
Aesthetically-speaking the board looks nice. But man still a no buy for me due to following reasons. I hope JGINYUE will improve their design in the future.
1. No VRM sensor
2. No wifi module included
3. No place for CMOS battery on board so any buyer had to do ass solution like stripping wire & taping them together
4. XMP will only work if you lock 1.35V on RAM
I think there are certainly disadvantages as it is unrivaledly cheap.
Top👍
가격은 진심 지리는보드 itx가 10만원따리라니
Hello - question...
Where can i downlooad the latest bios for the motherboard? I just got mine and not sure where to look for bios
There is a link to the website, but it seems rare that the website works properly.
www.jginyue.com/
I Notice you have the AXP120-X67 cooler, can you tell me which orentation that cooler fit in this motherboard? it seem that in your benchmarking the cooler is very bent.
If you're looking for a compatible cooler with the same design as the AXP120-X67, there's an IS67XT product.
@@DalraeMyo has it been confirmed if the IS 67 XT won't interfere with the motherboard cooling fins?
안녕하세요 이번에 JGINYUE B760I에 Thermalright AXP120-X67 쿨러를 장착하여 ITX를 빌드 중인데 램 간섭이 걱정되 램을 구매하지 못하고 있는데 혹시 영상에서 사용하신 램 이름 좀 알 수 있을까요? 제가 구매한 보드는 D5 이긴 한데 큰 차이가 없을 것 같아 질문 남깁니다!
제가 테스트했던 RAM은 DDR4 모델로 G.SKILL의 FLARE X 모델입니다.
쿨러 장착시 저와 같은 방향으로 장착하면 램 높이 제한은 아마 없던걸로 기억합니다.
@@taenk4130 Were you able to set up axp120 without bending it because of the motherboard's cooling fin?
Kihn Plaza
Effertz Circles
The motherboard doesn't have either wifi module or battery?
cpu support list what is the best processor from a i5 2500
Cleve Mill
Lindgren Squares
Chandler Lodge
Elroy Way
Cartwright Squares
Corkery Circles
hi how to setup bios fan control 😅
Darron Center
Raina Roads
이 보드 구입해서 i3-12100으로 저전력 셋팅을 해볼려고하는데 PL1, PL2 변경 가능한가요? 35w 정도로 걸려고 합니다.
변경 가능한걸로 알고있습니다. 아무리 싼보드라도 보통 PL1/2 제한은 가능합니다.
How is the VRM temps on this board are they fine?
doesnt have vrm sensor based on what i watched
hola amigo, necesito ayuda con el bios, me puedes compartir algun enlace?
En el caso del archivo BIOS, fue imposible acceder al sitio web oficial en Corea donde vivo. Recibí el archivo BIOS del vendedor de AliExpress.
Do i need do update the bios or can just use the default version?
Up to the 13th generation CPU, it can be used without updating the BIOS version.
Mante Mission
Cali Island
혹시 PCIE 슬롯 bifurcation 지원하나요? 좋은 영상 잘 보고 있어요.
레인분할기능은 확인을 못하고 떠나보냈네요..ㅜㅜ
Kira Camp
Romaguera Villages
Weimann Crossing
혹시 해당 메인보드로 언더볼팅도 가능한가요?
영상을 어느정도 봤는데 언더볼팅에 대한 이야기는 없어서 질문드립니다 ㅜ
B칩셋의 한계인지 바이오스 문제인지 언더볼팅은 제대로 동작하지 않았습니다.
@@DalraeMyo 말씀 감사합니다. 이번에 알리 익스프레스 광군절에 B760M Snow dream 메인보드를 구매한터라 혹시나해서 여쭤봤습니다만...이부분은 아쉽네요. 따로 홈페이지 같은게 보이지 않아서 어디 건의할곳도 없구요...ㅜㅜ
홈페이지가 있긴한데 우회없이는 접속이 안돼는거같습니다. 다른 구매자들 후기를 보니 판매자한테 1:1 메세지로 드라이버 소프트웨어를 받은것같습니다.@@와오옹-x3n
Mills Islands
Tate Rest
Luigi Field
lt's can useing on intel gen14
Diego Ranch
Sir. Does this motherboard have pbo?
The motherboard over XMP 2.0 and secure boot?
Lowe Parks
Is it possible to secure boot
Olen Villages
Lindgren Spurs
조립하는데 많은 도움이 되었습니다. 감사합니다.
그런데 저 바이오스는 어디서 다운받을수 있나요?
공식홈페이지 접속이 안되서 판매자한테 요청하면 다운로드링크를 준다고합니다.
@@DalraeMyo 감사합니다!
Helen Shoals
Deontae Spurs
Murray Ramp
Donato Cove
테스트하실때 CPU쿨러가 어떻게 결착되어있는 건가요?
AXP120-X67 설명서에 명시된 쿨러 설치법대로 장착했습니다.
플라워타입의 CPU쿨러라 쿨링팬을 위쪽을 바라보고있습니다.
@@DalraeMyo 메인보드 방열판 때문에 약간 기울어진거 같아서 질문드렸어요
AXP120-X67시리즈가 원래 VRM방열판쪽이랑 간섭이 있어서 살짝 밴딩이됩니다. 히트파이프쪽이 휘어올라가는거라 냉각에는 딱히 문제는없습니다. (다른 ITX보드들도 마찬가지더라구요)@@Fortissimo-zt1dd
Alysa Flats
Have any rgb control software support?
RGB control seemed possible in the BIOS. I couldn't check the software on the OS because I couldn't access the official website.
I am having trouble installing Windows 11. Clean install, new build. Did you install Windows 11 successfully? Can you tell me how? Thank you.
@@__aceofspades I installed genuine Windows 11 just like any other motherboard. There was nothing unusual about the installation process.
@@DalraeMyo my mobo is arriving, I would test about the softwares, and If i remember i say here (Sorry my english is bad)
absolutely not, I used B660i before with old Bios even it didn't have RGB entry. Today I just updated to the BIOS version April 7 similar to the one in the video, now the RGB function can be adjusted but only for 1 color, not a rainbow. The good thing after RGB was opened, it was able to recognize Adata D50 RGB ram. It will probably never have its own driver, I've been waiting almost 1 year
Kulas Hill
Isaiah Pike
쿨러 호환 조아용'?
전면 M.2 방열판이 높지가 않아서 크게 호환성은 문제 없을것 같습니다.
중국제 제품들 대게 냄새나고 일부는 눈 아픈데 냄새 안나요?
예상외로 멀쩡했습니다. 그보다 메이저제조사 제품도 안해주는 내부 스트로폼 완충포장은 참좋네요..
Will Estate
Legros Ports
Franecki Drive
I should have bought this instead of an H610m ASUS... :( meh... hahaha
형~ 목소리 듣고 싶어요~
아재목소리라 따로 영상에 목소리를 담아볼 예정은 없습니다...
Hi, i have another question, this Motherboard has bclk cpu overclock suport? I bought this one i would like OC my 12100f
Unfortunately, I have not tested overclocking because I mainly test underbolt and downclocking.