How to Use Victoria to Test and Fix Your Hard Disk in 2023
Вставка
- Опубліковано 14 жов 2024
- 👍 Watch how to check a hard, external or SSD drive for surface defects or bad sectors, and fix them with the free program called Victoria.
• In the Standard tab that opens we can see the list of all drives connected to this computer, and information on them.
It includes drive name, number of clusters, memory and the motherboard connector the drive is using.
• The SMART tab shows the drive status, namely its current SMART values.
To see it, click on Get SMART and Victoria will show in the right window the current drive status.
Please note that SMART is not supported for USB drives.
The window in the left shows the list of attributes with their values. The most important values are those shown in Tresh and RAW columns.
Tresh is the value that an attribute has to reach to be recognized as critical.
RAW is the most important indicator for evaluation of the drive status. It contains real values directly telling you about the disk health.
There are many SMART attributes, and all of them are important. But in our case, the following items will be the most important for quick evaluation:
1 - frequency of read errors. There are many of them, but it’s not critical because this number coincides with the attribute.
195 - the number of errors fixed by hardware means
5 - the number of sectors reallocated by the hard drive to a reserved area. In our case, there are none - 0.
187 - the number of sectors to be reallocated. There are also none - 0.
196 - the number of reallocation operations. None.
If values in these attributes were higher than zero, or if they were not corrected with hardware means in time, it would indicate there are problems with the drive.
• Now let us move to the most important tab Tests which actually tests the disk for bad sectors.
Let us start the test and look at it in detail while the program is working. To do it, click on Start.
This is where you can set the beginning and the end of the tested area, which is by default set to cover the entire drive: these are fields Start LBA - End LBA. You can also choose what the program does after the test, choose a test type and so on. For a simple test, don’t change anything
If you liked this video, click the Like button below and subscribe to our channel to see more. If you have any questions, leave a comment to ask one. Thank you for watching and good luck!
Thanks for video, would it be possible to fix "Caution" errors on hard drive with victoria
Thanks for your video.
I was wondering if the disc tested is the one installed in your laptop or were you testing an external disc?
I really need an urgent answer...
bye bye!)
I want to choose write to delete everything, but I don't know What is the difference between ddd and wr lba run and which is better
"How to ....2023"
>is 2024
>uploaded 6 years ago
hmm
hhh
What's the official website for victoria?
thanks
So question.... If S.M.A.R.T. reads BAD right off the bat should I assume the Drive is physically damaged and just replace it instead of trying to recover sectors?
Great video very helpful !!!, but I have a question, I used smart and it said my drive condition was good but I had over 13000 reallocated sector counts and when I ran the test I had over 1000 red and blue errors, in trying to restore them it failed what do I do ?
Back up your data , your drive is failing .
Don't believe this crap , it's fake data report
plz tell me solution 3tb hard disk 2tb ok and 1tb unollocated i cannot make the partition 1tb its still unollocated
good
my 3tb hard disk 2tb ok and 1tb unallocated i cannot make paration 1tb,and 2tb make ok
hi the victoria 4.66 seems not working on my wd external hdd i got many message like this 8:59:46 : Starting Victoria 4.66b
9:02:06 : Block start at 339968 Error: UNCR
9:02:09 : Block 339968 try RESTORE... Fail
at 442368 Error: UNCR
10:33:20 : Block 13238272 try RESTORE... Fail
10:34:20 : Warning! Block start at 13240320 = 60061 mcould you please help me !JFi,my HDD never fall or got physically hurt
At 4:08 you say: "- In the erase mode, the program tries to write data into the damaged sector and (...)" What? What do you say here? Use it for other? Use it frozen? And use it frodo? What?!
How to remove password HDD?please half.
thanks a lot
this is outdated Victoria version, in the new one (5.23)all was changed, also the GUI and options!
Link?
@@radamelfalcao7005 google?
@@radamelfalcao7005 hdd.by
also this material is a plagiat ua-cam.com/video/a-1r96btQkM/v-deo.html
No link to download, pls share Link
you have multiple accounts about this one topic. seems sketchy.
RIPOFF FROM
ua-cam.com/video/a-1r96btQkM/v-deo.html
7 start, SCUUUUMBAG
you should have remove the music
I know it's old vid but you stole it from channel "Hetman Software: Data Recovery for Windows" an just past your watermark
ua-cam.com/video/a-1r96btQkM/v-deo.html
or just search How to Use Victoria to Test and Fix Your Hard Disk
THIS IS NOT YOUR VIDEO ya scammer, or someone else is claiming it to be theirs Like the Hemmit Software utube channel.... he changed the year to 2021 same title...lol
no reply nothing. find something els to do. please
5 years ago was 2023 ? clickbite