How to Repair Bad Sector on Hard Drive
Вставка
- Опубліковано 22 січ 2019
- How to Repair Bad Sector on Hard Drive
►►►SUBSCRIBE for more: ua-cam.com/users/Britec09...
Is your hard drive showing signs of wear and tear? need to check for bad sectors on that hard drive to see if the bad sectors need to be fixed or repair? well you can really repair bad sectors, but what you can do is detect bad sectors, the hide them so windows does no attempt to read or write to that part of the drive that has bad sectors. Bad sectors can cause crashing, BSOD and Hard Drive Errors.
www.hdat2.com/
rufus.ie/
How to Deal with Bad Sectors on Hard Drive
First you will need to create a bootable flash drive with HDAT2 on it, then enable IDE in the BIOS and run scans on the hard drive for bad sectors.
------- My Social Links:
🔵 View My Channel - / britec09
🔵 View My Playlists - / britec09
🔵 Follow on Twitter - / britec09
🔵 Follow on Facebook: / briteccomputers
🔵 View my Website: BritecComputers.co.uk
🔵 My Official Email: brian@briteccomputers.co.uk
#FixBadSectors #HardDriveBadSector #RepairBadSector
#HardDisk #HDD #Hdat2
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Britec09 🖕🖕🖕
I have a boot problem FreeDOS kernel 2842 (build 2042 OEM:8xfd) [compiled May 11 28161 Kernel compatibility 7.18 WATCOMC - FAT32 support
(C) Copyright 1995-2012 Pasquale J. Villani and The FreeDOS Project. All Rights Reserved. This is free software and comes with ABSOLUTELY NO WARRANTY; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
C: HD1, Pri[ 11, CHS= 8-32-33, start= 1 MB, size= 1919 MB
FreeCom version 8.84-pre2 XMS_Swap [Aug 28 2006 00:29:08]
Using US-English keyboard with US-English codepage [437]
C:\>
Not continuing after this panel , pleace answer
His britech
I have a bare bones basic bios
On my Compaq cq60
I had windows 7 32 bit running
It was a 250 gig hard disk with 2 partitions
Since it was a fresh install my c drive was full so I decided to use easeus recovery to extend the partition
It was going well and after shrinking my second partition to extend my c drive it
Showed the usual progress bar
Then it rebooted a few times and showed no os installed I thought it probably bricked my os so o decided to get my win7 installer again and it got stuck in the windows logo
Then I had a win10 1709 usb which didn't get stuck in the logo and showed the entire drive as unallocated
And it wouldn't let me format or fox teh hard drive bcs it kept giving me I/0 error redundancy cyclic something
I got a live Linux OS running on a usb and Linux helped me recover some of my data
But Linux couldn't format the drive
So I decided to use the hard disk test from the bios and that failed immediately
Any help would be appreciated
(I'm currently running Linux on a 32 gig memory card and it is extremely slow I was hoping if I can get some help)
*I wish you had tried this on an old drive so we could see HDAT2 in action.*
Who else is here only AFTER permanently losing precious data files already written to bad clusters before finding out that you have to run a CHKDSK as soon as you pop in brand new storage media???
Bad sectors, the beginning of the end of a hd, had a few bootlisting errors ( double dir and program names) a few times and that was game over very soon.
Thanks for the video Brian...miss the Teamspeak days! :)
Got new discord which I am releasing for you guys.
@@Britec09brian i have a ps4 that cannot check system storage. Im assuming its a bad hdd and needs replacing. The problem is i have 100’s of saved videos on that drive from game play on fifa or gta that i cannot afford to lose. If i connect it to my laptop can i recover that data before doing a factory reset on my ps4. What programme is free that i can use for this?
Do you suggest to use only the verify option at first, or we can immediately choose verify/repair bad sectors?
Can you please do a quick tutorial on the set max address menu? I specifically would like to know how to hide a part of my hdd.
There are logical errors or phisical damaged errors on HDD Surface, we can fix logical errors with chkdsk f/r or use diferent programs, for keep our data & fix it (HDD regenerator, spinrite) for me is use a low level format (Samsung hutil,wd dlife,victoria,vivard) and if the issue can't solve is replace hdd, thanks britec for this tutorial
Hi, I would like to use your video to repair my hard drive, but by SATA Configuration, there is no IDE Mode in the SATA Mode and there's only AHCI Mode. In this case i have a Asus X540LJ laptop with Windows 10, could help me that what should i do?
Very helpful. Always wondered how to fix bad sectors. New drives are so cheap now, however. For me would be much cheaper and easier just to replace. I really appreciate your videos. Your insights are invaluable. Thanks, Brian.
This was very handy! Thank you for doing such videos!
Great job man!
Thanks for explanation!
What step do i do first? The MBR one or the DETECT WITH VERIFY one?
Thanks for the video! I was looking or some tips on HDAT2 and this is exactly what I was looking for. BTW, your beautiful background picture, "Playa Ventana", is no more :( We lost it with the latest earthquakes, south of Puerto Rico. :(
Hi Brain after i enter dir everything comes up as usual,but when i type hdat2 says Bad command or file name.I cannot get any further what can i do ?
I noticed that the software (at around 7:30) has a disable password option. Will this disable any hard drive password or only one that has been set by the software?
Thankyou for this video.I finally fixed my Hard diak and i knew a lot of things about manage hard disk👍🔥
which is the best program to use, Drevitalize or sprin rite or hdd rgenerator ? any other is better than the ones i mentioned?
Very informative, good explanations and easy to understand, camera focusing can be improved. thank you sooo much
Ahmed Azeem Yes recommendade keep using a hdd
What is the difference from using this to running ChkDsk /F ? They both mark the bad sectors so what is the big difference?
ChkDsk /F can't always deal with bad sectors
Will it work if my hard drive have device io error.when I try to format normally it states "the request cannot be processed due to device io error".I tried all normal format,disk Mgmt,diskpart.nothing works.will Rufus accept this?
If you can not format your drive use HDD Low Level Format Tool 4.40 , So far only tool that i had luck with on dead drives.
Hi Britec is this possible that all important data will be erase once it will run to repair the bad sector?
Thanks you Dear. Very Helpful. you save my 2TB Hitachi H.D.D
will it erase the data stored on the drive
Thank you. Your video helped me so much!
What all we need to do while connecting a 2.5 laptop hdd to a desktop.. My doubt is regarding the power input of desktop that is for 3.5 hdd and do that damage the laptop hdd if connected ?
Is this any different than Hard Disk Sentinel surface test? If it is the same then my god how convenient HDSentinel is compared to whatever this is.
I am getting error
Your selected device is hung reset required. Now what to do????
In my book a bad sector is a HDD that's starting it's journey to the graveyard. So therefore I would recommend replacing instead. Consumer grade HDD's are utterly unreliable anyway in comparison to SSD's. When you really need big storage, always use one as backup and replace them within 3(-5) years.
Yeah
The hell with that... I like to live on the edge...
That why my main hard drive its 15 years old... still function like new XD
That's bad luck then. I have 3 1TB hdds with 10 years with over 60000 hours of use all working good, I have a 160GB IDE HDD working good too, I then have 2 laptop HDDs with some bad sectors also working good for 5+ years. In my main PC I have 3 HDDs, two with 2~ years and one with 10 years. all of these are working good, so for me consumer HDDs ARE reliable
I have a 500gb hdd which is only 8 months old, now it's getting bad sectors
Would this work with an older MacBook Pro?
i have done same you have shown but still am getting the same CRC error nor able initialize. so not showing in explore nor disk managment
Good stuff bro Heem but it seems to me like this tutorial should’ve been called “ how to detect bad sectors” Because you didn’t show how to repair them. Just a heads up... I’ll keep looking... I like all the rest of your videos though so thanks for doing those.
No recomendable keep using a hdd with bad sectors for saving important stuff.
What's the difference between a bad block and a bad sector? My drive has bad blocks.
I enjoyed this video Brian, but I don't think I'd be to scared to use it. lol Thanks Don.
is it work if i buy a new one harddisk? or ssd?
What happen next if its finished running detect with verify?
Is it possible to fix it with a disc change? (I don't have any important data on the disc)
is software reminds me, the old but very powerful and miraculous DiskManager for Ms-Dos of Ontrack, until it seems the new vercion, I will try it and it will be just as good as the old DiskManager, although an HDD with damaged physical sectors is very difficult to repair, I have only managed with the old DiskManager, to have such is with this software, but especially this type of software is not for novices in the field
I have 900 bad sectors and may hdd health is 9, what should I do?
This program cannot be run in dos mode what should I do?
will this format the drive that i am trying to fix? please reply. i really need help
Please help me whenever i want to fix health it gives me error "smart disk error " and health of hdd is 0 WD company
How do you use it with USB drives?
Will this fix reallocated bad sectors?
Hey man the program (shut up 10) is down do you have a solution for the program?
I believe this is a good program. I almost had a problem with an external Hard drive, I could not do anything. So I tried HDD Regenerator and I managed to revive the 1 TB External HDD that was unusable. The program found a 10944 bad sector and isolated them, for now I'm using it again, we will see how long ...
hello. may i know if you still experiencing the problem again after more than 7 months of your comment? as i also got problem now, need to check whether it is still okay or still got issue
Please tell me , it work.
I'm also having this issue , can you please tell if that worked or not
Can we format?
Can it run on 8 pending sectors.
Thank you
So if my hdd have 500 bad sectors is that good
Will this work on external hdd
Does work for a usb pen drive with bad sectors?
Hello. Do you have a Mac Version?
Hello there → Will this format the Hard Drive?
Nö
Will it erase the entire disk to fix?
You wonder why real good stuff like this , is never show on that "other" channel Bye for now Cheers
lol
Nice Video Mr. B. Thanks
You're welcome
is this method can avoid 100 disk usage problem ?
No.
While using ssd can i do it
My hdd shows when hdd health checking it shows Head flying hours more and not showing any thing. How to fix it pl suggest me
HDAT2 can not detect my hard drive but bios can. My hard disk is 500gb but my bois sees 240gb. Should I trow it in a trash bin?
What is actually a bad sector?? And why it can't be repaired? Is it a hardware issue or a software issue? I can't understand it. Is it like a transistor that got broken? I don't get it
I run Linux ... is there a way to fix/ repair bad sectors in Linux?
have u found a way to fix it?
In hd tune.... hdd problem.... current pending sector is... this drive has unstable sector😭😭😭 thanks brian
Great video! Repairing bad sector on hard drive is important!
Thanks
@@Britec09 you're welcome
Thank you .
Nice one Brian, thank you.
Thanks.
Awesome: Very detailed and easy to follow
Thank-you for your time and effort
Hey why dont u reply the very important question? Will it format the data???
very good video I hope you make part 2 for it.
Houston we have a problem, my 8TB still alive, still giving read errors and been a problem for game update, i just formatted so theres nothing on it it still has read errors or clusters i dont understand, its a drive that works but its been akward. its got 1 error thats all i know, its a storage drive i dont boot from it
I give up with the booting , no start
same. i just froze.
tanx sir
suddenly i cant access my hdd all data on it how to repair?
Can't boot into it, i tried everything, changing boot order to usb, legacy mode, burning it to dvd, making a usb drive, simply ridiculous and enraging, can't be simple for me nope.
I suspect this is a Seagate/Samsung Momentus drive. They're known to develop bad sectors early on. Personally, I avoid them like the plague.
Thanks Brian :-D
Rmprep has freedos as well, so it should work as well :-).
I used to use fdisk to repartition old drives and leave the bad sectors between partitions.
Took a bit of messing about though lol.
Yeah I love RMPrep
unfortunately, i do not have the boot settings necessary to use this. very sad times.
You can scan surface from windows, just make sure the drive is not the system drive, install a free partitiining program as most have surface scan.
rufus says that i cant use that iso, both 73 and 74 dont work
thanks bro
thankyou sir 🙏
i EXCLUDED BAD SECTORS USING MINITOOL PARTITION WIZARD ON A 2TB WD HDD AND THIS WAS 3 YEARS AGO I GOT TO SPLIT THE HDD IN 3 PARTITONS LOST ABOUT 500 GB BUT 1.5 TB STILL USABLE AND NO MORE NEW BAD SECTORS IM ALSO USING HDD SENTINEL TO CHECK FOR NEW BAD SECTORS SRY FOR CAPS
My hdd is 500 gb not its not intialiazing and storage is showing 2tb
I don't seem to have sata ide mode in bios
It's only ahci
Another informative video but this sort of stuff is way out of my league but very interesting none the less
Thanks
Tools for \SSDs\ please?
AOMEI Partition Assistant repair pro
Update 2022: try the new Spinrite 6.1 - a new video about this would be appreciated. Thanks.
Open the hard drive cover gently. Then blow the dust carefully again. Put the lid back on. Because I have a hard drive it was 50% life but now it is 97%.
It is okay to open the hdd cover?
Not really, you need clean room, dust will enter drive.
@@nilsfrahm1323 it was 1 year ago bro
i have 616 bad sector, can i save my hard drive ?
nope
4:00 You have to copy it into the LOCALE folder.
mine is just full of red bad clusters
tHIS ISN'T WORKING
This wont work on a UEFI only system
Cant find IDE mode
You drive automatically deal with bad blocks. No software needed. But keep an eye on it.
It is good if it is short why
Hdat2 command not working bro
hdd regenerator simple and easy
Is it permanent?
Yikes, my hard drive is in worse condition than I thought, i guess its finally time to invest in a new one
Good