Hello! And how to do that on edc15p with two am29f010b on board? I have tune with hardcut, and i want to remove it, because it doesn't let the vehicle to reach the top speed:)
What’s your thoughts on doing this on a stock ALH, what reliability mods should I do to ensure not blowing the engine. I know the 1.9 tdi’s are pretty bullet proof but hey
Doing this is definitely harder on the engine so it’s up to your discretion. I personally make sure all my maintenance is up to date and done often even b4 recommend
I’m just a guy learning and sharing what I’ve learned Not really ever done files for others If u want to reach out maybe i can help erauto.vw@gmail.com
Yes it is still possible and it depends on wha ecu that car uses as we don’t have them Here You’ll need something to read and write to your specific ecu
Hello there! I would like to add the hard cut to my bmw e90 m47 automatic. The car standing still is reving 4100 but while driving is reving more. Where should i put the hard cut? If i put it at 4100 i could hit it while driving? And my car has 4 torque limiters maps. Which one should i change ? Or i should modify all of them?
I have a VW Golf mk5 2.0 GT TDI. Before i bought it I believe it was remapped as it was a lot faster than my previous Golf mk5 2.0 GT TDI. Also the stock turbo blew so i replaced it for another stock which also blew. I have no put a hybrid turbo in. I dont know much about harcut but i plan to do a stage 2 and a 4 bar map sensor install. Would you advise doing the hardcut after the stage 2 or before? Also what software are you using to do this. I am new to this. Thanks
ER Automotive thanks for your swift reply will do so. Just out of curiosity as i would like to learn this kind of stuff, which software do you use? Cheers
hi there this is perty simple, but when i save it it stays as ".Bin" so i never uploaded a file like that to my car, the ones that i have dont say anything, thats strange too, but it worked so far. I use ecm titanium for some selflearning and already did more than 20x times but never with a bin file, ecm titanium opens the file no prob, but shloud i upload to my car that vagsuite save?
ER Automotive are you Portuguese? I don’t really know much about checksum, the only thing is that ecm titanium says it is fine or bad automatically, the files that I downloaded from my car with vkess are always with no extension, but by no means I’m saying that’s good, ok now I realize that the files are bin files, can we talk via Skype or WhatsApp? Not today but someday, when it’s good for u, If possible ofc
Not recommended for cars with mechanical/hydraulic pump vp37 like alh engine. It can fasten wear much more than PD engines. It is only possible for vag cars with edc15, all other are much different and very complicated.
@@ERAutomotive I did and i like it. Easy to do on edc15(because i did same, check my channel), when you find how to do on edc16 then put video ;). Learning winols is like x10 harder than vagsuite.
Hi, i’ve had my car remapped and had a hardcut limiter put on it, but i’ve now decided i don’t want the hardcut limiter anymore and they are saying it will cost me £200 to have the car mapped again just to be able to remove the hardcut limiter, is this correct?
@@ERAutomotive Thanks for your anwser! Wich one is best program wich alows you to mess with map? Im new to the game just trying to understand how it works?
i use an mpps cable from eBay software for tune is edcsuite and in theory it is harder on the engine but im my mind its not enough to stop me from having it on my cars just don't sit on the limiter all the time
Sb _ Nigga hey rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.ca%2Fulk%2Fitm%2F323782527572 That’s the type of cable I’m using And vperformance.co.uk/how-to-remap-diy/vagsuite-download-free/ That’s edcsuite to download Hopefully this helps get your started
@@ERAutomotive hi, i have tried on denso ecu on torque limitation and edited the axis, it doesn't work. Any guides on other maps where to modify to have it.
I did this on my pd with no issues Also did the svrl limiter as it’s even faster response with no issues And it was my daily driven car and I beat the crap out of that car
Hello, i really apreciate your videos. Could you make a video on how to modify boost limit and wastegate actuation?
Perfecto, you are the BEST, im not speak spanish
Hello! And how to do that on edc15p with two am29f010b on board? I have tune with hardcut, and i want to remove it, because it doesn't let the vehicle to reach the top speed:)
Hello, I was wondering how can I load a map into the program, or what should I do, because when I open it it is blank. Hope you can help me
Hello. I only have unknown maps in that software. Do you know why ?
What’s your thoughts on doing this on a stock ALH, what reliability mods should I do to ensure not blowing the engine. I know the 1.9 tdi’s are pretty bullet proof but hey
Doing this is definitely harder on the engine so it’s up to your discretion. I personally make sure all my maintenance is up to date and done often even b4 recommend
do you still offer these services?
I’m just a guy learning and sharing what I’ve learned
Not really ever done files for others
If u want to reach out maybe i can help
erauto.vw@gmail.com
Hi, I have a 3cyl 1.4tdi and was wondering if this is still possible? And what do I need apart from the program?
Yes it is still possible and it depends on wha ecu that car uses as we don’t have them
Here
You’ll need something to read and write to your specific ecu
@@ERAutomotive oh okay, thank you 👍💯
Hello. I have a Bmw x5 2014 3.0 diesel. Tuner will fix stage 1 Bs hard cut limiter is there any thing i should worried about?
I don’t worry about anything with hardcut personally
Can this work with ECM Titanium software with ASY SDI engine in Skoda Fabia? Also, is VAGEDC Suite software free and can it support map from skoda?
Yes vag suite is free
Just google and it’ll come up
As for skoda im not sure never tried we don’t have skoda here
@@ERAutomotive thank you so much
So if i was to set the 50 difference to say 40 would it be slightly faster fuel. Cut
In theory yes
But the pump and such can only react so fast so it’ll be limited to that
But yeah I have tried 10 rpm difference b4
Hello, can we set a new speed limiter with this program? Its for an EDC15P+
Hi sorry I’m not sure about this I’ve never looked into it or tried
Hello there! I would like to add the hard cut to my bmw e90 m47 automatic. The car standing still is reving 4100 but while driving is reving more. Where should i put the hard cut? If i put it at 4100 i could hit it while driving? And my car has 4 torque limiters maps. Which one should i change ? Or i should modify all of them?
I think you’d mod all of them
And put higher then 4100 or it’ll always limit you there
Second and forth one :) 4450
I have a VW Golf mk5 2.0 GT TDI. Before i bought it I believe it was remapped as it was a lot faster than my previous Golf mk5 2.0 GT TDI. Also the stock turbo blew so i replaced it for another stock which also blew. I have no put a hybrid turbo in. I dont know much about harcut but i plan to do a stage 2 and a 4 bar map sensor install. Would you advise doing the hardcut after the stage 2 or before? Also what software are you using to do this. I am new to this. Thanks
If your getting a tune just ask your tuner to do the limiter for you
ER Automotive thanks for your swift reply will do so. Just out of curiosity as i would like to learn this kind of stuff, which software do you use? Cheers
Edcsuite is the software I’m using in the video
But for your car winols would be better
ER Automotive thank you
What software are you using? I'd really like to learn how to tune my bew
In this video was edcsuite
But for bew you’ll want to use winols
@@ERAutomotive do you know where you can get winols?
www.evc.de/en/product/ols/software/
Or www.mhhauto.com
Is it possible to do popcorn limiter with this programme? Faster limiter than the hardcut.. if so how do you do it?
On an alh you can’t really do popcorn to my knowledge. It doesn’t react fast enough like a pd
I have an ELM cable I use for my fiesta st using the FORSCAN software. Would that cable be capable of making ecu changes in my 05 BEW jetta?
No you’ll need to get a mpps or similar
@@ERAutomotive can you tell me how to buy that so I can add the hard cut popcorn rev limiter of my fully deleted jetta Tdi 2013
Much more involved to flash the newer cars
And I haven’t personally done it yet
When I do I’ll make a video tho
Hey bro i have a 2007 3.0 tdi , mpps and ecm titanium does this program works ? Or doesn't find maps correctly, i want to try your method
I don’t believe Ecm titanium will automatically find the maps you’ll have to find a map pack or define the maps yourself
Hi, sorry for my english is not to well.
Can i set 20-40rpm for faster popcorn ? its safety or i can broke something?
Yes u can
I haven’t seen any issues with doing so
Hey dose this program read the current map on the car thanks
Edc suite opens the file that has been read off the ecu. Follow mpps video to read the file off the ecu
hi there this is perty simple, but when i save it it stays as ".Bin" so i never uploaded a file like that to my car, the ones that i have dont say anything, thats strange too, but it worked so far.
I use ecm titanium for some selflearning and already did more than 20x times but never with a bin file, ecm titanium opens the file no prob, but shloud i upload to my car that vagsuite save?
All the files I do are .bin
Make sure checksums are corrected
ER Automotive are you Portuguese? I don’t really know much about checksum, the only thing is that ecm titanium says it is fine or bad automatically, the files that I downloaded from my car with vkess are always with no extension, but by no means I’m saying that’s good, ok now I realize that the files are bin files, can we talk via Skype or WhatsApp? Not today but someday, when it’s good for u, If possible ofc
@sp00lintdi on Instagram
Not recommended for cars with mechanical/hydraulic pump vp37 like alh engine. It can fasten wear much more than PD engines. It is only possible for vag cars with edc15, all other are much different and very complicated.
Check out my
Other video method 2 where I do popcorn on my pd
@@ERAutomotive I did and i like it. Easy to do on edc15(because i did same, check my channel), when you find how to do on edc16 then put video ;). Learning winols is like x10 harder than vagsuite.
I’ll for sure check out your channel
My method 2 video is on an edc16 ecu
Could you tell me what cable should I buy? I have been looking at SMPS MPPS V13 EDC16...
That’s what I have
@@ERAutomotive Could you suggest a reputable seller of those cables?
Got mine from eBay
Just picked a random
Hi , does it works on a3 2.0tdi bkd 140 or i have to use another software?
Depends what ecu that car has
Edc16 , 2004
Yes it will work
But I would do the other method
And you’ll want to use winols or similar
Hey man just did this on my alh, just wondering does your turbo chirp when you hit limiter aswell like kinda same sound when you shift the choo
Nah mine didn’t do that
Check your actuator and make sure it’s moving as it should
@@ERAutomotive do you think having a vnt17 would change this?
@@ERAutomotive but I will for sure be checking the actuator this weekend
No I don’t think that
@@ERAutomotive actuator movement is perfect, what els do you think it could be?
Hola para bmw 330d ? Es igual??
do i need to have some kind of tuned exaust?
Yes if u have cats and muffler it will be very quiet
will it work on a DENSO ECU map? can read it but there is not any categories
I only have limited experience with Bosch edc15/16 ecus sorry And this only applies to diesels as well
Whats the difference to svrl?
denso ecu can support hard cut and lift off crackels like an edc?
Yes I believe so
But I have never done on denso
Does EDCsuite work with the CJAA EDC17 engines?
No it’s only for edc15 as far as I know
ER Automotive is there an equivalent?
For the edc17 in your car I’d be using winols
Hi do you know if the car has to be manual tran or will this work on an auto aswell?
and also do you need the dpf/egr to be removed to do this?
Auto or manual doesn’t matter and egr no biggy but yes I’d recommend straight pipe. But I have done the limiter on a pd with a cat no issues so far
@@ERAutomotive Awsome thanks for the help!
Hi, i’ve had my car remapped and had a hardcut limiter put on it, but i’ve now decided i don’t want the hardcut limiter anymore and they are saying it will cost me £200 to have the car mapped again just to be able to remove the hardcut limiter, is this correct?
That just depends on the tuners way of doing/ charging
Are u able to read and write your own tune?
@@ERAutomotive no i have no equipment at all, it’s just such a pain to have to pay all of that money for a £25 add on to removed
i didn’t know if anyone is able to code it out using vcds or something like that
What is your car?
erauto.vw@gmail.com
I can prob help you out
Vcds can’t do it
Ecu has to be flashed
@@ERAutomotive have emailed you
Should this work on edc16u1? I have a BKC engine
Yes I believe so
hello my edc15 suite does not have to make a new map why? any solution?
I’m not sure sorry
I use winols if that type of thing is needed
@@ERAutomotive Please can you give me your email or WhatsApp to ask you a few brief questions.
Whats the program name you are using to alow you do this stuff? Thanks
@dario in the video I’m using vegedc suite
@@ERAutomotive
Thanks for your anwser!
Wich one is best program wich alows you to mess with map?
Im new to the game just trying to understand how it works?
@dario. Edcsuite is good for edc15 ecus. Or winols is another great program but requires more time to learn but will be better in the end
Hello! The vagedcsuite and the kess v2 are friends? :) Can i write vagedcsuite files with kess v2?
Shouldn’t be a problem
Does this work with 2.0l TDCi engines?
Yes same theory applies I believe
What kind of a cord do you use?
Where do you get the software?
Does the hard cut hurt the engine in anyway?
i use an mpps cable from eBay
software for tune is edcsuite
and in theory it is harder on the engine but im my mind its not enough to stop me from having it on my cars
just don't sit on the limiter all the time
ER Automotive hell yeah ok bro good video thanks for the reply 👍🏻🙋🏻♂️
@@ERAutomotive hey man, I wanna order cable but I cant find it, can you please send me link, and program is free ?
Sb _ Nigga hey
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.ca%2Fulk%2Fitm%2F323782527572
That’s the type of cable I’m using
And
vperformance.co.uk/how-to-remap-diy/vagsuite-download-free/
That’s edcsuite to download
Hopefully this helps get your started
Why are there so many different ways to do popcorn, are they all the same?
There is a lot of ways to do it
And no they are not the same
Come be done on many different limiter maps
@@ERAutomotive Is this method here apply to a 1.9tdi PD130 BLT?
Yes it can be
Can you do a video for a beginner on how to connect your PC to your car using vagedcsuite
Check out how to flash with mpps
Edcsuite does not connect to car only for editing the file once read from car
Would this program work on my Volvo v70 tdi 1998?
No it will not
Any recommended program?
Winols
Does this work on 2.5 v6 tdi with vp44?
Yes I believe same
Theory applies
Hello, how do you find the torque map ? Thanks !
Hey
If your ecu is edc15
Then it will be predefined in edcsuite just open it and make your desired changes
@@ERAutomotive I have a BOSCH EDC16C34 🤔
Ok you’ll need winols and a map pack
Check the tuning groups on fb there
Will be someone there to sell u a map pack
What program is that? Expensive?
Hey the program is vag edcsuite and it’s free
I believe there’s a link in one of the other comments
This method can work with EDC15C ?? and EDC16C?? Thank you
Yes the method using the torque limiter map works on edc15/16
@@ERAutomotive same method working for edc17?
Yes it will work on ecd17 as well Svrl will work as well
Hello does this apply on mitsubishi? Can you help me?
Sorry I’m not sure if it’s similar or same ecu I’d imagine it might work
@@ERAutomotive thanks will try it.
@@ERAutomotive hi, i have tried on denso ecu on torque limitation and edited the axis, it doesn't work. Any guides on other maps where to modify to have it.
Can this be done on AUDI A6 C6 3.0TDI
Yes it shouldn’t be an issue
can i do that with ecm titanium instead vagsuite?
Yes
@@ERAutomotive thx man hundreds of awesome videos. i searched thousands time for how to remap with mpps but i cant find until your videos
How does the pd's react on it? Got Told that the injector's would damage? And also that the turbo wont be happy with it?
I did this on my pd with no issues
Also did the svrl limiter as it’s even faster response with no issues
And it was my daily driven car and I beat the crap out of that car
Bro can u explain me how to apply this in to your car ?
Watch my how to flash with mpps video and you will see read and write of ecu
Hi , the cut is in all gears?
yes this will have the cut in all gears
Thanks , its possible make without cut in 5° gear?
@@BrunoGym82 yes but would be a different method and the way i would do it would be speed baised
Can i do this without dpf egr delete
You could But not sure you’d see the sound benifts or like that. Also possible extra wear and tear in the dpf
He work on tdi 110 audi a3 8l 1999?
Yeah this method should work on the vehicle
But I’m not 100% sure as I haven’t done it on that vehicle personally
Hola pues esplicar como hacer multimap
How to do it with backfire?
This is a tdi only one tuner has this working I’m not sure how
@@ERAutomotive I know its a tdi, but I saw lots of vp with flames on hardcut limiter
hood stack lots of timing lots of fuel might get you there
Does it damage the turbo or the engine?
I haven’t had any issues on my cars
how i do in bmw 123d tkhs
I’m not 100% sure
But I’d guess it would be very similar
Just gotta find the right maps in the tune file
But this program works with bmw ?
@@marcioribeiro8403 no depends what ecu is in the bmw
prob best to be using winols or similar with a map pack
Cup no, did you sort the 123d?
w vp to jest proste , zrób to w PD
olha o popcorn
torque limiter not is haard cut only very poor normal end of rpm nothing beauty
its not making srututu bum its only rpm cut and making łututu łututu
does it work on audi a4 2000 1.9tdi ajm?
Yes I believe so not 100% on it tho
Does it work on a 04 bew Jetta?
Yes but I would recommend doing the other method on the bew
@@ERAutomotive thank you for the quick reply!!