Hello good sir Your videos have been a blessing for me. There isn't much useful information about lifan bikes out there on the internet and you are here doing all the informing that lifan must have done. I have done everything on my 2023 kpr 200 based on your videos. it is really fun working on bikes.
You're welcome, you just made my day, this is exactly why I started making these kinds of videos. I appreciate you very much my friend and keep on doing what you are doing
That’s awesome, I had the KPV out yesterday and was going 70mph on the speedometer and still had a little throttle left. This really is an amazing bike/ scooter. I hope you get one and enjoy it, thanks for the feedback!
I've had my KPV150 for 4 months (600 miles) and I love it. So glad to have some English vids to learn more about it! Thank you so much. I will soon have to change the lube in the rear wheel hub gear box - any chance you might consider a lesson on that?
i owned 1 now is the 3rd years.. the bike is good no problem since i bought it.. the only problem its lack of power for uphill.. maybe due to 150cc only..
@@HelmetLawSux That’s awesome, I’m glad to hear that! Yeah a 150 isn’t a powerhouse but I felt like it’s sufficient for most riding. But then again I don’t have near the time on it that you have. I appreciate the input, thank you 👍🏻
@@turlalawrence5990 Really, is it full of coolant in the radiator and the reservoir bottle? I never noticed any heat at all especially while traveling.
@@turlalawrence5990 I don’t know a lot about the Philippines, I guess it’s a hot climate there? With the engine where it’s at it wouldn’t get a great deal of airflow, if there’s a way to open up a panel to allow more airflow that might help some
@@ToddBinNM The turbo charger would be installed with the muffler bearings right behind the do dad. 😁 I’m still looking for the LED cup holders, currently out of stock. I may have to resort to the traditional old school one 😂
It’s just a mesh screen. I’ve had just this on other bikes and it ran good without problems. This scooter is liquid cooled so it runs cooler than an air cooled scooter and should be a better longer running engine. Thanks
@@herbiesgarage681 Спасибо за ответ. Сомнения в том ,что в мануале указано пробег до замены масла 4000км.... Без бумажного фильтра как то сомнительно,хотя всё может быть
@@herbiesgarage681 Спасибо ,успокоили))) У меня такие же мысли. Понял даже без перевода)). Мне этот скутер новым делают доставку во вторник. Не сочтите за наглость ,если я еще позже к Вам обращусь)) Всего хорошего желаю из Беларуси и ещё раз благодарю за помощь
I have a similiar scooter sold in Europe by Linhai , it’s 125cc , ADV style,similar single rear sock position.Mine seems to have Yamaha Nmax engine, this Lifan seems to be Honda engine?
@@danalexanghel The company I buy from, venom motorsports just started selling a Linhai 300 atv and the way I understand it, it’s a copy of the Yamaha. So you’re probably correct on yours. My Lifan KPV 150 is very similar to the Honda Adv 150 so it probably does have a clone of the Honda engine. It’s a great scooter, how do you like yours?
@@herbiesgarage681 did around 800 km on it. Feels great, rides great. Suspesion is fantastic. Has ABS and TCS. Large dash display as pros. As cons: no temp info on display even if LC, but you have OBD2 port and adaptor provided by vendor. Space under the seat is small - no place for helmet , but it comes with top case ADV style. Lack of space is because of the rear shock placement. Another con si paint. Mine is red and only painted on on side. Paint feels kind of tin. Here is a pick under the hood ua-cam.com/video/rEjMWMN_Z0Q/v-deo.htmlsi=pWJE89bruesV-bE-
@@herbiesgarage681 I have the Linhai since september. Rides great, it is liquid cooled , good power, suspension feels great. I did around 800km on it most in the city. Seems solid . Came with top case as seat space is limited due to rear shock configuration. Has a large dash display but lacks engine temperature. Has obd2 connection under seat. Panels are only painted on one side. Mine is red. Here is a sneek peak under the hood ua-cam.com/video/rEjMWMN_Z0Q/v-deo.htmlsi=pWJE89bruesV-bE-
Здарова, второй день обкатываю свой lifan 150, мне не нравятся обороты холостого хода на прогретом двигателе, выхлоп не монотонный а какой-то чуть дерганный и вибрация приличная что даже поворотники и стекло ветровое вибрируют, думаю лезть в клапана с щюпом или нет, как у вас дела обстоят с вирациями на холостых оборотах?
@@kadyrganzo9961 Hello, my bike is very smooth with little to no vibrations to speak of. I have adjusted my valves already but this bike is so smooth and quiet that you can't tell its running sometimes
Здравствуйте, вы когда купили скутер зазоры клапанов были в норме или пришлось их регулировать, у меня новый скутер, стоит ли мне отрегулировать зазоры, у меня вибрация на холостых оборотах неприятная?
@herbiesgarage681 mine consumes a lot of fuel. im getting 70 mpg on my kpv. I've checked all the hoses and the tank i got no leaks. And the also the tps is reading 0.68 on idle 4.5 on max throtte. Im suspecting the fuel pump because it has whinning sound since day 1 the sounds is like a whistle but in a lower pitch.
@ A lot of things can affect gas mileage. The weight of the rider, how fast you normally ride, tire pressure etc. The more resistance the bike has to push the more power it requires from the engine. 70mpg is a little low but I wouldn’t think you have a mechanical problem especially if it still starts good and runs good. Also, if the engine isn’t fully broken in then give it a little time, if it is fully broken in I would check anything that would affect rolling resistance including a dragging brake. Good luck my friend
@@herbiesgarage681my tire are 29psi on the front and 33psi at back. Im 65kg, and i ride my kpv just about 40-60 kph which this has reads 4000-6000 rpm.
@@Di-ito-MotoVlog You should be getting maximum efficiency at those numbers. Does your front and rear wheels roll smoothly if lifted off of the ground and spun? How many kilometers on the scooter?
Hello good sir
Your videos have been a blessing for me. There isn't much useful information about lifan bikes out there on the internet and you are here doing all the informing that lifan must have done.
I have done everything on my 2023 kpr 200 based on your videos.
it is really fun working on bikes.
You're welcome, you just made my day, this is exactly why I started making these kinds of videos. I appreciate you very much my friend and keep on doing what you are doing
This video finally sold me to KPV 150.
That’s awesome, I had the KPV out yesterday and was going 70mph on the speedometer and still had a little throttle left. This really is an amazing bike/ scooter. I hope you get one and enjoy it, thanks for the feedback!
@@herbiesgarage681 i hope so too. keep doing this awesome content.
@@juanshanevillanueva Thank you, I plan on making several videos on the KPV over time.
Good to know this stuff, thanks!
@@jayhanneman8962 you’re welcome
You are Lifans best friend, if I buy one of these it will because of you.
Thanks you so much, that’s an amazing compliment, I appreciate it 👍🏻😊
I've had my KPV150 for 4 months (600 miles) and I love it. So glad to have some English vids to learn more about it! Thank you so much. I will soon have to change the lube in the rear wheel hub gear box - any chance you might consider a lesson on that?
@@davidmiller8446 Hi David, I’m going to be changing that soon as well. I appreciate that, thank you
i owned 1 now is the 3rd years.. the bike is good no problem since i bought it.. the only problem its lack of power for uphill.. maybe due to 150cc only..
@@HelmetLawSux That’s awesome, I’m glad to hear that! Yeah a 150 isn’t a powerhouse but I felt like it’s sufficient for most riding. But then again I don’t have near the time on it that you have. I appreciate the input, thank you 👍🏻
Excellent video. Good information 👍
Thank you Jerry!
👍
@@seg83423 thank you
I brought this one on August 31,2024 and I say its good the only problem is freaking hot
@@turlalawrence5990 Weather is hot or scooter is hot? 🤔 I know it’s been hot around here lately for sure
@@herbiesgarage681 the engine hot sir I can fell it on my set also in the compartment
@@turlalawrence5990 Really, is it full of coolant in the radiator and the reservoir bottle? I never noticed any heat at all especially while traveling.
@@herbiesgarage681 maybe because Im in the Philippines
@@turlalawrence5990 I don’t know a lot about the Philippines, I guess it’s a hot climate there? With the engine where it’s at it wouldn’t get a great deal of airflow, if there’s a way to open up a panel to allow more airflow that might help some
Great video as always, Herbie. Where do I install the turbocharger and cup holder?
@@ToddBinNM The turbo charger would be installed with the muffler bearings right behind the do dad. 😁 I’m still looking for the LED cup holders, currently out of stock. I may have to resort to the traditional old school one 😂
What is the length of this suspension sir? Thanks ❤
@@thescientist8233 I honestly don’t know, I could do some measurements on it if that would help
Hello sir. Can you pls advice where the ecu of the lifan kpv150 is located? Much thanks in advance sir!
Hello, if you remove the seat and bucket, you should see it underneath toward the front of the bike kind of in front of the gas tank
I'm assuming it's a 2 valve head. Is that correct?
@@zacharytruette4395 Yes, you are correct. One valve for intake and one for exhaust
Помогите понять..... В моторе этого скутера есть маслянный фильтр тонкой очистки? Очень надеюсь на ответ. Или там стоит только сеточка?
It’s just a mesh screen. I’ve had just this on other bikes and it ran good without problems. This scooter is liquid cooled so it runs cooler than an air cooled scooter and should be a better longer running engine. Thanks
@@herbiesgarage681 Спасибо за ответ. Сомнения в том ,что в мануале указано пробег до замены масла 4000км.... Без бумажного фильтра как то сомнительно,хотя всё может быть
Your welcome, I agree with you 4000 km is pretty far before an oil change, I would be more inclined to change it at 2500 km
@@herbiesgarage681 Спасибо ,успокоили))) У меня такие же мысли. Понял даже без перевода)). Мне этот скутер новым делают доставку во вторник. Не сочтите за наглость ,если я еще позже к Вам обращусь)) Всего хорошего желаю из Беларуси и ещё раз благодарю за помощь
I have a similiar scooter sold in Europe by Linhai , it’s 125cc , ADV style,similar single rear sock position.Mine seems to have Yamaha Nmax engine, this Lifan seems to be Honda engine?
@@danalexanghel The company I buy from, venom motorsports just started selling a Linhai 300 atv and the way I understand it, it’s a copy of the Yamaha. So you’re probably correct on yours. My Lifan KPV 150 is very similar to the Honda Adv 150 so it probably does have a clone of the Honda engine. It’s a great scooter, how do you like yours?
@@herbiesgarage681 did around 800 km on it. Feels great, rides great. Suspesion is fantastic. Has ABS and TCS. Large dash display as pros. As cons: no temp info on display even if LC, but you have OBD2 port and adaptor provided by vendor. Space under the seat is small - no place for helmet , but it comes with top case ADV style. Lack of space is because of the rear shock placement. Another con si paint. Mine is red and only painted on on side. Paint feels kind of tin. Here is a pick under the hood ua-cam.com/video/rEjMWMN_Z0Q/v-deo.htmlsi=pWJE89bruesV-bE-
@@herbiesgarage681 I have the Linhai since september. Rides great, it is liquid cooled , good power, suspension feels great. I did around 800km on it most in the city. Seems solid . Came with top case as seat space is limited due to rear shock configuration. Has a large dash display but lacks engine temperature. Has obd2 connection under seat. Panels are only painted on one side. Mine is red. Here is a sneek peak under the hood ua-cam.com/video/rEjMWMN_Z0Q/v-deo.htmlsi=pWJE89bruesV-bE-
Здравствуйте , скажите пожалуйста какой зазор выставлять на впускном и выпускном клапанах.
I just finished a valve clearance check and adjustment video which I will post in a couple of days. I set intake valve to .08mm and exhaust to .12mm
@@herbiesgarage681 Спасибо
@@Андрей-э6м your welcome my friend
Здарова, второй день обкатываю свой lifan 150, мне не нравятся обороты холостого хода на прогретом двигателе, выхлоп не монотонный а какой-то чуть дерганный и вибрация приличная что даже поворотники и стекло ветровое вибрируют, думаю лезть в клапана с щюпом или нет, как у вас дела обстоят с вирациями на холостых оборотах?
@@kadyrganzo9961 Hello, my bike is very smooth with little to no vibrations to speak of. I have adjusted my valves already but this bike is so smooth and quiet that you can't tell its running sometimes
Здравствуйте, вы когда купили скутер зазоры клапанов были в норме или пришлось их регулировать, у меня новый скутер, стоит ли мне отрегулировать зазоры, у меня вибрация на холостых оборотах неприятная?
Hello, I did adjust my valves, they weren't off by very much at all though. It would probably be a good idea to check the clearances on the valves.
Hello man. Can i ask what is your gas mileage on your kpv?
@@Di-ito-MotoVlog according to the odometer it’s around 100 mpg which is fantastic
@herbiesgarage681 mine consumes a lot of fuel. im getting 70 mpg on my kpv. I've checked all the hoses and the tank i got no leaks. And the also the tps is reading 0.68 on idle 4.5 on max throtte. Im suspecting the fuel pump because it has whinning sound since day 1 the sounds is like a whistle but in a lower pitch.
@ A lot of things can affect gas mileage. The weight of the rider, how fast you normally ride, tire pressure etc. The more resistance the bike has to push the more power it requires from the engine. 70mpg is a little low but I wouldn’t think you have a mechanical problem especially if it still starts good and runs good. Also, if the engine isn’t fully broken in then give it a little time, if it is fully broken in I would check anything that would affect rolling resistance including a dragging brake. Good luck my friend
@@herbiesgarage681my tire are 29psi on the front and 33psi at back. Im 65kg, and i ride my kpv just about 40-60 kph which this has reads 4000-6000 rpm.
@@Di-ito-MotoVlog You should be getting maximum efficiency at those numbers. Does your front and rear wheels roll smoothly if lifted off of the ground and spun? How many kilometers on the scooter?
Дядька,ну почему ты не говоришь по русски😂😂 .Мне как раз нужна твоя инфа про этот скутер
I am not smart enough to learn other languages 😂 maybe when I get a little older I’ll learn 😂 Thank you
Привет
Hello my friend