Yeah I have to agree with others. You didn’t do it wrong, but there is a better way to do it. STEP 1 Drain Oil lol STEP 2 Remove Brake Pedal Change oil after every hard ride. Or 1-2 hrs of ride time and it will save your clutch 👍
Way better than stock. Can buy here www.vividracing.com/inuitive-race-products-triplegrip-clutch-ktm-50cc-disc-husqvarna-tc50-gasgas-mc50-20092022-p-153642355.html
Can someone please help 🤪 I have a 2018 ktm 50 sx for my 6 year old. How can I stop the clutch from dragging on this bike. The clutch is brand new oil is clean. It’s driving me crazy lol. Thanks for the vid 👍
Switch to the Intuitive triple grip and you will forget any issues www.vividracing.com/inuitive-race-products-triplegrip-clutch-ktm-50cc-disc-husqvarna-tc50-gasgas-mc50-20092022-p-153642355.html
How is this clutch holding up? Any more longevity than stock? Factory clutch plates are non-existant right now, so I'm either buying one of these or carbon fiber oem plates. Thanks in advance for any advice.
Moto Mermel thanks for the quick reply! Mind me asking about how many hours are on the clutch? This bike isn’t gonna last my 7 year old much longer, don’t mind spending the money if it lasts longer, but at some point, I have to put money towards a 65…
Fire in one of the IRP 0.5mm shims like I did instead until clutches are back in stock. I'm putting the big wheel kit on ours to get another year out of it.
The clutch is smaller so you have to add more oil, and with the other clutch cover you get 375ml of oil, wich is very nice compared to the 200ml stock. Less likely to overheat and slipping
@@alekto1 great, but which oil? i can't find datasheet for irp (NYTRO) clutch oil? its imposible to buy it in Poland. With standard clutch we used mobil 320 but, whats with irp?
Should torque your clutch cover bolts and Pre soak your clutch components. Would have dumped all the old oil first as well.
Dam straight
Yeah I have to agree with others. You didn’t do it wrong, but there is a better way to do it.
STEP 1 Drain Oil lol
STEP 2 Remove Brake Pedal
Change oil after every hard ride. Or 1-2 hrs of ride time and it will save your clutch 👍
Wow! Great video and great work!
When the factory basket was removed there was a leg part broken off? I’d have been checking the oil still laying in her for debris.
All is good! Have done 3 races since and plenty of riding.
Hi,one question,because put more clips(14)ande the motocycle,no work good,and 12 clips good work?
Just a handy hint the rear brake leaver is still hooked up apply the rear brake and the clutch bell won’t spin 👌🏼
Thx!
Hi,this clutch si diferent of they stock?is more power? where i can Buy?
Way better than stock. Can buy here www.vividracing.com/inuitive-race-products-triplegrip-clutch-ktm-50cc-disc-husqvarna-tc50-gasgas-mc50-20092022-p-153642355.html
@@motomermel8946 ok, thanks friend 👍
Great video. How do you like the clutch after a year? Just bought one about to install it in the next week or so. Thanks
Step 1 drain old oil!
I’ve got the 2007 model it all starts but want move at all wen you pull throttle any ideas what problem can be! Thanks
I had a friend with sane issue and I want to say he mic’d it and was a issue with binding. I would call clutch company to get advice.
Can someone please help 🤪 I have a 2018 ktm 50 sx for my 6 year old. How can I stop the clutch from dragging on this bike. The clutch is brand new oil is clean. It’s driving me crazy lol. Thanks for the vid 👍
Switch to the Intuitive triple grip and you will forget any issues www.vividracing.com/inuitive-race-products-triplegrip-clutch-ktm-50cc-disc-husqvarna-tc50-gasgas-mc50-20092022-p-153642355.html
How do I tighten a clutch bolt on my lads husky boy 50
Sorry missed this. I used impact and left it in gear
Where did you look to see if you need a new clutch cover?
I believe it’s in the older ktms up to 2014
Dude 😬 watch out for the clutch cover bolts stripping
Was ok in this go round!
was that motoland?
Yes
How much they new clutch perfomance?
About $500. Can order off vividracing.com
How is this clutch holding up? Any more longevity than stock? Factory clutch plates are non-existant right now, so I'm either buying one of these or carbon fiber oem plates. Thanks in advance for any advice.
Still works great. Lots of desert racing in it. Might adjust it shortly but doing great!
Moto Mermel thanks for the quick reply! Mind me asking about how many hours are on the clutch? This bike isn’t gonna last my 7 year old much longer, don’t mind spending the money if it lasts longer, but at some point, I have to put money towards a 65…
Fire in one of the IRP 0.5mm shims like I did instead until clutches are back in stock. I'm putting the big wheel kit on ours to get another year out of it.
Do you have a website where I can buy this clutch? I'm from Brazil
What bark busters did you put on that? I can’t find one cent that fits.
How many ML’s of oil does it now take compared to the 200 ML’s originally? Are you still using the ATF Dexron III?
I’m still using what Ktm manual says. It’s perfect. I use motorex.
@@motomermel8946 but.. the manual says about semi-synthetic?
The clutch is smaller so you have to add more oil, and with the other clutch cover you get 375ml of oil, wich is very nice compared to the 200ml stock. Less likely to overheat and slipping
@@alekto1 great, but which oil? i can't find datasheet for irp (NYTRO) clutch oil? its imposible to buy it in Poland. With standard clutch we used mobil 320 but, whats with irp?
@@AntekMXtv judd racing recommend Two2Cool CTF-R Clutch Fluid.
But since to expensive to import for me, I'm gonna keep using the castrol dex III atf
What gas ratio do you run
60:1