No feedback you guys are doing what works for you and that’s the best thing. Don’t sacrifice what you are to appeal to others. Just my opinion. Great work keep it up.
I liked a lot when you’re shaping metal and explaining how to get shapes and to finish the metal out, when you’re shaping and explaining stretch & shrink. I should have learned metal work but instead learned home improvement & painting skills. I envy a metal sculpture because it’s so far away from working with wood. You’re very entertaining but I really liked it when you’re being funny and teaching us your craft. Rodger Rodger!
Im fairly new to the channel, and i like how light hearted it is, but id like to see less banter and goofyness, and more build. You all are great! But lets see more Fab work.
@@bigdadgigachad3042 they asked for suggestions. They didnt ask for you specifcly to answer for them. And id also like to add that your "95%" is a bit off. maybe stop being a Kevin, take their members outta your mouth, and just let the comments do what they do.
Hey Guys! Gotta say your videos are actually very perfect as is 😮 For the sake of saying something - maybe a recap and progress estimation once in a while: like just say what you’re working towards and how far along you are. Just because I’m dying to see the end result I want to know when we’ll see it in all its glory!
@@CrucibleCoachworks if you create a bottom of carbon with steel axles you have essentially created an indestructible car. Then with bolt on fenders you could create a car that can be changed over time.
I wouldn’t change anything about this channel besides maybe more and/or longer videos as unrealistic as I realise that is. You guys are awesome. Always entertaining, funny, and informative. I’m really keen on that sweet tee and I’m not usually one to grovel but perhaps I go at this from an advertising angle? Do you guys have advertising in the southern hemisphere yet? I’m in New Zealand. I’ve got you. 😂✌🏼 Seriously though.. love your work. Keep it up.
@@CrucibleCoachworks Thank you so much sir, I will wear that with pride! What wonderful news to wake up to! That’s made my week right there. Thanks so much!
Love these iconic Porsche's from my childhood. My Dad worked for Penske Porsche Audi and I have always wanted a 928. The body is coming along super nice. What do you have planned for the engine? Just watched an LS turbo swap for a 928..... Just thinking outloud!
I’ve been following along this build on Tik Tok and now recently on UA-cam. All I have to say is amazing job! I love the short straight to the point videos on Tik Tok and the longer, behind the scenes videos on UA-cam. One question, I am fairly new to your channel and I wanted to ask since you mentioned that you use the CAD to design some of the body panels, do you have a degree in mechanical engineering or not?
Can't think of any critiques, it's entertaining and informative. I mean, I don't particularly feel anything for Porsches (beyond some being cool cars like many others), but I still watch for the above reasons and it's interesting and quality content. Keep on keepin on yall
I'm foreign and now I watching a lot of english language videos before my relocation to USA, but man, you have terrible pronunciation. It's both hard and useful to listen you! If I started to understand all words that you say, I'll ready to relocation. "wooboolooboo..." what?! (at start of most first sentensies. Funny.)
My idea to make your channel go wider is to make it go translated on a couple of different languages, as my natural language is Spanish I can tell so many people may love to understand what you do (Spanish talking people) I hope my idea deserve the price 😂 Btw great work it’s amazing how it is going 💪💪💪
I flippin love the channel! The only thing I can think that you could do is to try a different flavour of Porsche, maybe a VW / Porsche hybrid like a Beetle? Keep up the good work!
This is the first video of yours I've watched after months of seeing random Instagram posts. I really enjoyed it! The 928 is my favourite Porsche, and I can't wait to see the finished product!
I don't want the shirt don't give it to me but I feel like you could do some better cinematography because I feel like you make such artful stuff and then its mid quality clips. Camera guy is doing a great job I think you just need a better camera lol. Love the videos though and you guys are super funny so keep it up.
Those back wheels are tucked up pretty tight in the arches, will the 928s rear wheel steering system be an issue? Sorry if you've already mentioned it before.
I do love how informative you guys are, everything looks great, considering how much gets done I’m impressed by how often the uploads are too! Quality stuff!
Can anyone help him create a blinker light. He is an awesome metal artist but lights is not his forte. He would be better off getting a light from a newer model or another brand to fit in there instead of that mickey mouse thing with a fog light in the middle that he create. A lot of passion and hard work but you will have to admit that's not a good looking light at all, my 16 year old can probably do better
Sorry my answer would be less talking nonsense and do more work. I love this channel but sometimes I really wonder what you be going on about I don't think your still 10. Lol.
![JDM Sleeper Mini [Season Premiere]](/img/n.gif)
congrats to the winner, so much for the pocket screwdriver popularity
As everybody has already said, content is great, uploads are great. Cheers for Logan on camera and editing.
Maybe more Tony and mechanicals.
That camera work @5:33 was some crazy mashup of The Matrix and the intro to Eureka from SciFi. Super cool depth of field.
The key thing to improve is to overview all projects in your garage in each episode
My suggestion for something to do better is longer and more videos! Seriously love watching this channel and wish it was more frequent
No feedback you guys are doing what works for you and that’s the best thing. Don’t sacrifice what you are to appeal to others. Just my opinion. Great work keep it up.
Loved the 928 as a kid growing up, can’t wait to see the finished product! Looking awesome so far😎🤜⚡️🤛
Love watching your videos... I'd like to see more videos a week
Was here for the metal fabrication side of things but starting to love the atmosphere and shenanigans, the dad jokes and one liners are top notch
I liked a lot when you’re shaping metal and explaining how to get shapes and to finish the metal out, when you’re shaping and explaining stretch & shrink. I should have learned metal work but instead learned home improvement & painting skills. I envy a metal sculpture because it’s so far away from working with wood.
You’re very entertaining but I really liked it when you’re being funny and teaching us your craft. Rodger Rodger!
Im fairly new to the channel, and i like how light hearted it is, but id like to see less banter and goofyness, and more build. You all are great! But lets see more Fab work.
Maybe appreciate what they bring to us FOR FREE. It's more hands on, creative and informative than 95% of other channels in this sector of YT.
@@bigdadgigachad3042 they asked for suggestions. They didnt ask for you specifcly to answer for them. And id also like to add that your "95%" is a bit off. maybe stop being a Kevin, take their members outta your mouth, and just let the comments do what they do.
Keep up the great work, guys. Looks great as always.
Hey up I think that if the episodes were a little longer they would be improved for me 🎉
You should rename this series “ How to make a 928 look like a 944”.
Colour code the whole dag-gon workshop Porsche Martini colours with a giant fibreglass cherry on top...
Hey Guys! Gotta say your videos are actually very perfect as is 😮 For the sake of saying something - maybe a recap and progress estimation once in a while: like just say what you’re working towards and how far along you are. Just because I’m dying to see the end result I want to know when we’ll see it in all its glory!
You were using a MIG gun towards the end of the video. What's the story there? Was it because of the lap joint?
good to see you work metric.....not that inch crap
Tony: time to clear off the fridge.
Ryan: hey, I just made that 30 minutes ago!
😂😂😂😂
So young. So talented. You should be designing full cars. Majestic work young man.
Thank you! We plan to do just that. Cheers!
@@CrucibleCoachworks if you create a bottom of carbon with steel axles you have essentially created an indestructible car. Then with bolt on fenders you could create a car that can be changed over time.
Ed Shearin’.
It’s too funny, my ribs hurt from laughing right now.
If only we could get that reaction from Tony. 😤
I love your content as it has been so far. The only thing I could suggest is to make more videos!
Do it. :)
Love your videos, you've shown me stuff that i had no desire to ever learn, and have become much more interested in.
Love your shirt designs 😊
All I can say is longer videos, the content is so good you just want more of it, keep it up guys
keep it funny:) more Star Wars please
I wouldn’t change anything about this channel besides maybe more and/or longer videos as unrealistic as I realise that is. You guys are awesome. Always entertaining, funny, and informative.
I’m really keen on that sweet tee and I’m not usually one to grovel but perhaps I go at this from an advertising angle? Do you guys have advertising in the southern hemisphere yet? I’m in New Zealand. I’ve got you. 😂✌🏼
Seriously though.. love your work. Keep it up.
Good thing you're keen on our shirt, because you've won! Can you shoot your shipping info over to us at "ryankrause@transloggt.com"? Thanks!
@@CrucibleCoachworks Thank you so much sir, I will wear that with pride! What wonderful news to wake up to! That’s made my week right there. Thanks so much!
Love these iconic Porsche's from my childhood. My Dad worked for Penske Porsche Audi and I have always wanted a 928. The body is coming along super nice. What do you have planned for the engine? Just watched an LS turbo swap for a 928..... Just thinking outloud!
I’ve been following along this build on Tik Tok and now recently on UA-cam. All I have to say is amazing job! I love the short straight to the point videos on Tik Tok and the longer, behind the scenes videos on UA-cam.
One question, I am fairly new to your channel and I wanted to ask since you mentioned that you use the CAD to design some of the body panels, do you have a degree in mechanical engineering or not?
Can't think of any critiques, it's entertaining and informative. I mean, I don't particularly feel anything for Porsches (beyond some being cool cars like many others), but I still watch for the above reasons and it's interesting and quality content. Keep on keepin on yall
I'm foreign and now I watching a lot of english language videos before my relocation to USA, but man, you have terrible pronunciation. It's both hard and useful to listen you!
If I started to understand all words that you say, I'll ready to relocation.
"wooboolooboo..." what?! (at start of most first sentensies. Funny.)
My idea to make your channel go wider is to make it go translated on a couple of different languages, as my natural language is Spanish I can tell so many people may love to understand what you do (Spanish talking people) I hope my idea deserve the price 😂
Btw great work it’s amazing how it is going 💪💪💪
I flippin love the channel! The only thing I can think that you could do is to try a different flavour of Porsche, maybe a VW / Porsche hybrid like a Beetle? Keep up the good work!
This is the first video of yours I've watched after months of seeing random Instagram posts. I really enjoyed it! The 928 is my favourite Porsche, and I can't wait to see the finished product!
I don't want the shirt don't give it to me but I feel like you could do some better cinematography because I feel like you make such artful stuff and then its mid quality clips. Camera guy is doing a great job I think you just need a better camera lol. Love the videos though and you guys are super funny so keep it up.
Waiting for the next vids of 911 backdate 😊
They’re coming very soon! 👀🤝🏻
@@CrucibleCoachworks great !!! 😃👍🏻
Those back wheels are tucked up pretty tight in the arches, will the 928s rear wheel steering system be an issue?
Sorry if you've already mentioned it before.
Nothing really that you can do better, super clean and proffesional work, thought me a lot, have 2 project cars of my own and your videos help a lot!
Post more Videos. Love the Channel. like the awesome work you do. From South Africa
As you ask for feedback, here goes: I like your work but you waist too much time with jokes and kiddings.
Don't change anything, Ur great as U are, really enjoying the show from The island of Sardinia, Italy
bad to the bone dude! The watchmaker is still loving and following the crap outta your work brother.
Y'all need to do another colab with Grind Hard Plumbing on that Porsche power wheels they have.
id love to see more content for inexperienced people like myself to follow along. you guys are great to watch. thanks
One way to improve your channel is to eat more cold bean salad. It will make you fart more and more methane in the air = better welds.
I do love how informative you guys are, everything looks great, considering how much gets done I’m impressed by how often the uploads are too! Quality stuff!
Love the vids i just wish you did a little more how to that also explained, why..
Keep up the good work.
i have nothing to complain just keep doing your thing (maybe more 928)
Awsome
Awesome awsome
Now the car needs an M120 V12 and and AWD drive train
I think the top of the rear scoop needs to taper back towards the door at the top, just under the rear quarter.
Your fab skills are second only to your dad joke skills. Godspeed.
Tell more jokes. 😅
Great content wish the were numbered so I can see all your build in order
Longer videos please, because we can’t get enough of ya
Nice work again. keep it up.....
Thank you! Cheers! 🤝🏻
Drivable art
If you could give us some tips that would be helpful
I love your content and how informative you guys are. Wish the were numbered so I can watch them properly. Otherwise, everything is tip top already!!
First time seeing you guys, this thing is looking sick gents!
Just keep chugging along, content, it's ggggreeat
I’d love to see you guys build a give away car
These metal fabrication videos are most interesting to me see different metal forming techniques, more of this. Greetings from Finland!
I'm guessing people would say speed up the process but I say keep as you are let the results speak for themselves keep up the great work
What are your plans for the engine?
Very impressive stuff
Realy nice Work 👌
i love this build.
Cannot wait to see this build in its finished state
Camera is out of focus.
I'm done with your🤬 give aways but not your awesome videos!
Can anyone help him create a blinker light. He is an awesome metal artist but lights is not his forte. He would be better off getting a light from a newer model or another brand to fit in there instead of that mickey mouse thing with a fog light in the middle that he create. A lot of passion and hard work but you will have to admit that's not a good looking light at all, my 16 year old can probably do better
Sorry my answer would be less talking nonsense and do more work. I love this channel but sometimes I really wonder what you be going on about I don't think your still 10. Lol.