hey there Keith, can you pls pls make a video on how to install LUTs on the DJI hight bright monitor, I been struggling for the past 2 days. thank you.
Hey there, to get a LUT onto the high bright monitor, you need a micro SD card. Put the LUT on the top level of the card, connect your monitor and transmitter (there has to be a camera connected to open the LUT sidebar on the high bright monitor) - put the microsd card into the monitor, and import the LUT. There can't be any special characters in the name or it will not import correctly. The only LUT Ive imported so far was the official Sony Slog 3 SGC to 709 LUT and it worked great. Hope this helps
@@keith-knittel hey there Keith thank you, appreciate it a lot. so I managed to figure it out. I have discovered that the lut should now have any spaces in between, it should all be one word then it works and needs to be 33x. I loaded all the luts on I needed, only tedious part of it is, you will have to rename or delete the spaces in your luts, making them one word.
I'd recommend getting a Falcam F38 Nonslip Quick Release Plate to attach to the bottom of the focus pro wireless hand unit. It does not want to sit upright and this solves that, also there is still clearance for the battery door to replace the internal NP-Fs.
Could you explain how you attached the handle to the FX3? There’s only one screw connection there to attach the piece that came in the box for connecting the rod
I did the same what are we missing using the old cable version ??? I wish being able to use / change the same setting while using the highbrite monitor + handheld remote than when using the focus grip handle … Being able to select a zone to focus for in flex mode for exemple … having more than 3 lense profile. I also wich we could use the whole package at the same time. Dji focus pro + 3 motors + focus grip + hub cable + highbright monitor and handheld remote … any tips about that ???
Thank you for these informative videos! I have a question: Is it possible to use ActiveTrack without AutoFocus and then use the camera's own autofocus? For example if I want to use a 24-70 photo zoom lens on a FX3 - Can I then use the gimbal ONLY for ActiveTrack and then have the FX3 do the autofocus? Thanks!
I have not tested out a RS3 pro battery in the focus pro grip. It's the same battery/mount so I'm assuming it would work and would have better battery life, but I'd reach out to DJI about that before trying it just to be sure
so apparently, can only use the BG21 battery which is so sad. I saw a video where the person said the other batteries will overheat. but I don't know, would be nice if DJI can let us know and would be so awesome to be able to use the other dji batteries cause the focus pro battery drains quick!!
@@BobbyAdrianVitra hey Bobby so I spoke to support yesterday regarding this matter, and I can confirm, you can only use the BG21 battery grip, yes you can plug the other battery grips in but it will damage the unit. how sad it is, I'm in South Africa, Cape Town and its extremely difficult to get DJI product.
@@bronwinoctober9998 thats a bummer. I have to buy and carry different batteries that isn't compatible with one another. Anyway thank you so much for the info.
So with focus pro handle pro you now have 15 lens slots in a 3x5 array in Ronin app or ha dle. But the hi Brite and RS4 pro are stuck at 3. And not sure how models carry over since they are stored in motor. The other issue I'm having is some part of firmware is incompatible between focus pro handle and rs4 pro, so it keeps updating switching between two. I hope they address both these things and open up 15 lenses to all of the line.
Great video. Thanks for the info! A couple of questions. When you use active track with the Hub can you select the subject to track on the High Bright Monitor?
Unfortunately you cannot. You have to start active track with the gimbal screen or the screen on the hand grip. You can get a LiDAR feed using the hub, to the DJI monitor - but you can't activate active track on the monitor
I have not tried this, but will give it a shot. I've got a ton of different cables laying around so I can give this a shot. Just curious, whats your setup for using a longer cable? Long zoom lens and using your LiDAR closer to the front of the lens?
DJI sent me the gimbal and monitor to review before it was released, check out my first RS4 Pro video. I can't believe they havent released the hub yet
Buttons of the handles while in use with the high bright monitor can not be programmed as intended, Most Features are greyed out. Totally annoying. Additionally the handles can not be set in a Mode that is equal to the use of the handles with the Ronin 4D. Totally weird! It is impossible to change the focal length via handles on the high bright monitor.
Yeah, the focus hand unit can control Focus, Iris and zoom in a much better way than the 4d handles imo - that might be worth checking out. I hear you though, I love the handles attached to the monitor and wish everything just "worked". I hope a firmware update can add some more features and compatibility with this
Got the Focus Pro All-in-one combo about a month ago and struggling to use with a RS4 Pro gimbal. I have the transmission and Lidar connected with the new cable hub(square one), but as it turns out the gimbal wont power the transmission nor the lidar or the motors with this one. So you need to have a bunch of WB37 batteries ready and also a V-mount connected to the hub for the system to work. Been in contact with the DJI support and very bummed out by the whole deal…
The cable hub that is on the DJI site right now is still the V1 hub - the new cable hub has a power connection that you can power via D-tap or the gimbal. The transmission has to be powered with the battery either way though since it draws so much power. Very strange DJI hasn't released the updated cable hub yet
I saw in the product reveal that they mentioned a future release of a connection cable that can power other accessories from the RS. Once it's out, I'm definitely getting one.
hey there Keith, can you pls pls make a video on how to install LUTs on the DJI hight bright monitor, I been struggling for the past 2 days. thank you.
Hey there, to get a LUT onto the high bright monitor, you need a micro SD card. Put the LUT on the top level of the card, connect your monitor and transmitter (there has to be a camera connected to open the LUT sidebar on the high bright monitor) - put the microsd card into the monitor, and import the LUT. There can't be any special characters in the name or it will not import correctly. The only LUT Ive imported so far was the official Sony Slog 3 SGC to 709 LUT and it worked great. Hope this helps
@@keith-knittel hey there Keith thank you, appreciate it a lot.
so I managed to figure it out.
I have discovered that the lut should now have any spaces in between, it should all be one word then it works and needs to be 33x.
I loaded all the luts on I needed, only tedious part of it is, you will have to rename or delete the spaces in your luts, making them one word.
I'd recommend getting a Falcam F38 Nonslip Quick Release Plate to attach to the bottom of the focus pro wireless hand unit. It does not want to sit upright and this solves that, also there is still clearance for the battery door to replace the internal NP-Fs.
Will check that out, thank you for the recommendation
Could you explain how you attached the handle to the FX3? There’s only one screw connection there to attach the piece that came in the box for connecting the rod
can you change lenses as fast as without lidar? if not its better to get a mirrorless camera with pdaf+AF lenses.
Awesome.plan on using w Gh6 w panisonic/Leica 10-25 1.7 autofocus lens w/o dji motor. Thank You
Sounds like an awesome setup!
Hope so. Been waiting over a month for shipping.
I have used the older cable hub with the new motors and calibrated just fine. Are there more features that I'm missing?
I did the same what are we missing using the old cable version ???
I wish being able to use / change the same setting while using the highbrite monitor + handheld remote than when using the focus grip handle …
Being able to select a zone to focus for in flex mode for exemple … having more than 3 lense profile.
I also wich we could use the whole package at the same time.
Dji focus pro + 3 motors + focus grip + hub cable + highbright monitor and handheld remote … any tips about that ???
Thank you for these informative videos!
I have a question:
Is it possible to use ActiveTrack without AutoFocus and then use the camera's own autofocus?
For example if I want to use a 24-70 photo zoom lens on a FX3 - Can I then use the gimbal ONLY for ActiveTrack and then have the FX3 do the autofocus?
Thanks!
Pretty sure you can. I haven't tried yet though. I can test out later.
Have you ever tested if the dji rs3 pro battery (bg30) compatible to use with the focus pro grip?
I have not tested out a RS3 pro battery in the focus pro grip. It's the same battery/mount so I'm assuming it would work and would have better battery life, but I'd reach out to DJI about that before trying it just to be sure
so apparently, can only use the BG21 battery which is so sad. I saw a video where the person said the other batteries will overheat. but I don't know, would be nice if DJI can let us know and would be so awesome to be able to use the other dji batteries cause the focus pro battery drains quick!!
@@bronwinoctober9998 thank you for the follow up, sad cos i have the rs3 pro, and they cant share batteries.
@@BobbyAdrianVitra hey Bobby so I spoke to support yesterday regarding this matter, and I can confirm, you can only use the BG21 battery grip, yes you can plug the other battery grips in but it will damage the unit. how sad it is, I'm in South Africa, Cape Town and its extremely difficult to get DJI product.
@@bronwinoctober9998 thats a bummer. I have to buy and carry different batteries that isn't compatible with one another. Anyway thank you so much for the info.
Any advice on a strap for the hand unit?
I'm using the Tilta strap, I go over it more in this video here: ua-cam.com/video/MF_2AeFnQBg/v-deo.html
So with focus pro handle pro you now have 15 lens slots in a 3x5 array in Ronin app or ha dle. But the hi Brite and RS4 pro are stuck at 3. And not sure how models carry over since they are stored in motor. The other issue I'm having is some part of firmware is incompatible between focus pro handle and rs4 pro, so it keeps updating switching between two. I hope they address both these things and open up 15 lenses to all of the line.
Great video. Thanks for the info! A couple of questions. When you use active track with the Hub can you select the subject to track on the High Bright Monitor?
Unfortunately you cannot. You have to start active track with the gimbal screen or the screen on the hand grip. You can get a LiDAR feed using the hub, to the DJI monitor - but you can't activate active track on the monitor
@@keith-knittelthis was pretty disappointing, I'm hoping a firmware update addresses this.
@@prOkrEAtскорее бы они это решили бро(
can you tell me where to buy cable hub v2
It will be on the DJI site whenever it’s available. I dont see it on there yet though
Is there any longer usbc cable for the lydar or any way to make it longer. Ive tried using some of my usbc cables and they dont work
I have not tried this, but will give it a shot. I've got a ton of different cables laying around so I can give this a shot. Just curious, whats your setup for using a longer cable? Long zoom lens and using your LiDAR closer to the front of the lens?
@@keith-knittel Im using it with red komodo along with the rs3 with the grip mounted on the side
Like it~you uploadded excellent dji, ;))
What is the name of the bracket used to connect the high bright monitor to the FIZ hand unit?
I just contacted DJI Support and they haven't made it available yet... so frustrating!
It’s the DJI High-Bright Remote Monitor Holder :)
Diopter calculation modes are common in nicer focus systems. It’s just some math, so DJI should implement that.
That would be awesome, I love using the remus anamorphics but the minimum focus is tough for certain things
How did you get this? No one has them.
DJI sent me the gimbal and monitor to review before it was released, check out my first RS4 Pro video. I can't believe they havent released the hub yet
The main question is when Dji will deliver the focus pro to the public :)
It was just sold on their site. Not sure if its still for sale.
I ordered the Creative Combo from BHphoto in April. Got it July 7th.
Buttons of the handles while in use with the high bright monitor can not be programmed as intended, Most Features are greyed out. Totally annoying. Additionally the handles can not be set in a Mode that is equal to the use of the handles with the Ronin 4D. Totally weird! It is impossible to change the focal length via handles on the high bright monitor.
Yeah, the focus hand unit can control Focus, Iris and zoom in a much better way than the 4d handles imo - that might be worth checking out. I hear you though, I love the handles attached to the monitor and wish everything just "worked". I hope a firmware update can add some more features and compatibility with this
Got the Focus Pro All-in-one combo about a month ago and struggling to use with a RS4 Pro gimbal. I have the transmission and Lidar connected with the new cable hub(square one), but as it turns out the gimbal wont power the transmission nor the lidar or the motors with this one. So you need to have a bunch of WB37 batteries ready and also a V-mount connected to the hub for the system to work. Been in contact with the DJI support and very bummed out by the whole deal…
The cable hub that is on the DJI site right now is still the V1 hub - the new cable hub has a power connection that you can power via D-tap or the gimbal. The transmission has to be powered with the battery either way though since it draws so much power. Very strange DJI hasn't released the updated cable hub yet
I saw in the product reveal that they mentioned a future release of a connection cable that can power other accessories from the RS. Once it's out, I'm definitely getting one.
3:58 should i need video transmitter or reciver also?