ZF6HP26, TCM Repair
Вставка
- Опубліковано 10 лип 2021
- In this video, i have a wholesale account that did a transmission repair on a 2008 Land Rover, when plugging the harness back in the Tech bent a pin on the TCM, Helping out the repair shop, i sent the TCM to Softelectronic in Europe for repair, as usual they fixed it up for me, the repair shop reinstalled it and all is well. Thanks for watching, Like, subscribe, thumbs up. Have a great day.
- Авто та транспорт
Gary is a very nice guy , gave me some info over the phone . Very good professional.
You mad when it comes to gearboxes. Keep it going. Well appreciated!
Thank you
Hi Gary, I saw 5 bent pins in that plug as well as the broken one. Your customer needs to send his mechanic around to you to get some 'education' on how to install the plug I reckon. As there is a locating slot, you cannot really get it wrong. A good video lesson for us all.
yes, i was wondering how that happened
Well thanks to this video, I'll be able to see if my pins are vital for the car to run and get the issue fixed. Two of my pins broke off due to the plug being forced on.
Same happened to the car i fixed for my wholesale account, sent it to my guy in Europe and good as new
@@GaryFerraro I'll be waiting for a response from Softelectronics soon. Thanks for making this video. It'll help a lot of people.
You can reprogram these units. You just need to get it into boot mode which can be done either on the bench or via OBD2 with a K+DCAN adapter or one of a number of interfaces such as the HEXprog...at least this is the case for BMW.
If you contact xHP they also have software they use in support for a full write in the event of a botched flash while using their tuning software.
WINKFP also works on some rovers if you have the correct daten packages which are available online for free.
Thanks, Gary. I had a pin break off in the connector. No idea how that happened. I will be contacting Softelectronics on your recommendation. Like your colleague, I was very worried about the cost of replacement.
They can fix it, My contact there is George
Looks like I got lucky. Upon closer inspection the female pin on the connector plug got pushed in and was making intermittent contact. The TCM pins are perfect.
Any tips on reseating the female pins in the harness connector?
Thank you!
@@ThatCivilGuy Well, just push it forward see if you can get to lock in
Ive had that happen on a BMW once. After freaking out for a good hour I realized the pin that broke off wasnt used in that vehicle. Whew! Haven't made that mistake again!
Got lucky on that one
was it an early model with mechanical linkage? im guessing the fancy range rover uses the electronic shifter option that needs those pins
@@themajorahole I think it was a regular shifter, still has a range switch
@@Michael_J_M14 he sure was
Is that the same valve block as a ford? Is the computer the only difference?
Hi Gary. I am doing as you recommend in this and other videos, but when I reasempled the part in the 2011 LR4 Land Rover, I had a noise in the engine or transmission that was not there before. Do you have any suggestions? The noise is a high pitch sound that eventually desapears. Any help is welcome.
Is the noise in all ranges(park,rev,neytral,drive) Does this change with engine pitch?
you can reprogram them with ISTA+ or winkfp in expert mode. might even be able to us the XHP phone app too? the XHP people can help you if you contact them
Hi Gary I have a BMW 750i throwing a P0782, pretty rough 2-3 flare and goes into failsafe. Is this likely to be a valve body to pump seal, solenoid issue or an A/B clutch fault?
Don’t want to charge my customer if the thing is already toast.
could you see clutch fill times with your scanner?
@@GaryFerraro not with my scanner i can borrow a better one if needed.
ended up doing a service. mechatronic seals all original from 06 in good shape.
if shifted manually from 2-3 it’s pretty smooth otherwise it has a flare only when starting from a standstill in auto mode.
Hi. Great information videos. Can you suggest why their is delay of 2 sec when engaged in reverse. Its a x5 2008. 4.8. Zf6hp transmission. Is their problem with solenoid or something else.
does this happen when hot?
@@GaryFerraro no. Always delays whether cold or hot .
Hi, I have a 2016 acura mdx awd which has a bad TCM. Are you able to repair/rebuild this TCM and will this need reprogramming? Will a used unit require reprogramming if it’s from the same year make and model car? Thanks
Not able to repair, I'm honestly not sure if a used computer will work, i have not had any of thgese cars in the shop yet
I saw 3 bent pins before you sent it off....
Problem with Bmw with 6hp19 transmission code is : 4f85- clutch e. Is it the stator bushing causing this? Filling pressure for clutch e is 900 mbar
Probably. Pretty common. But could also be the seals between the valve body and transmission and/or clogged solenoids. Or all of the above. I had same issue. I replaced my valve body, solenoids and seals. Made a huge difference but I'm sure the stator bushing needs replacing in mine.
Any vids on opening the TCM ?
no sir, i do not have that
This Softelectronics company, is it in Bulgaria?
Yes it is.
Hello Gary
I have the same problem. My car Land Rover LR2 2011, when starting the car, all most is good, but after 30 second or more, light traction is one, and transmission program is off!?
Whst codes or code do you have?
@@GaryFerraro
P0700-00
Transmission control system (malfunction indicator lamp request)
@@FeridQadir That is a generic code, there has to be another one, scan the TCM
Добрый вечер... вам знакомый такой ошибки в 6hp19,,,004FB1 ?
Hello, please Mr. Gary I need your experience, my vehicle is a gasoline bmw E60 545i 2004, my Tcm was defective I replaced it with a diesel, since the vehicle blocks at 5000 RPM. What to do, what do you recommend me, which software or device, best regards.
I would think to get correct tcm, what is wrong with original one?
@@GaryFerraro It is an original it comes from a bmw e60 535Diesel gearbox 6hp26
Hello sir
I experience a rather strange problem regarding the transmission of my LR3 06
The TCM can not be detected from my iid tool the module is not available when the tool reading the ecus
Yesterday I did a complete service on my own filter fluids and plastic parts behind the mechatronic. The transmission took 2 liters of fluid and when I tried to change all gears to refill the rest the car has a transmission fault and F code in the dashboard . How is this possible when I can not see the TCM
THANK YOU
Mine did that after I serviced it because the mechtronic seal didn’t go far enough in. Once I got it in all the way I got communication back.
Can they repair speed sensors as well?
yes, had one done already
@@GaryFerraro I have a zf6hp28 in my shop now that has a bad turbine sensor. can I get that contact info please? Thanks
Hi Gary, I was looking for information about this problem and I found your video. I have a 2004 545i with that same code 005088 EGS (Electronic transmission control) sensor transmission switch L1-L4. I wanted to know where I can get that unit. Thank you.
It could be your range switch that is built into the TCM or your shifter, Do you loose the display on the Dash or does the car not start in park or neutral when hot?
@@GaryFerraro Hi Gary, thank you for responding. Yes, that's how you write to me. When the car gives the error and you put it in park, you turn it off and it doesn't turn on again. You have to put it in neutral so it can start.
@@GaryFerraro I already changed the gear lever for another one and the same problem continues.
Then it very well could be TCM, I send mine to Europe for repair@@eliesercasanas7543
When it's cold it starts in park?@@eliesercasanas7543
Hi Gary, where can I order ZF6HP26 TCM for 2009 kia borrego 4.8 v8
what is wrong with original? where are you located?
@@GaryFerraro the car only in third-gear
AR
@@user-qr3tz2ww7d What code is present?
Hello Gary, I have 2008 BMW 528i and the transmission is actin g up. When driving, I will get an error code that says " Transmission malfunction. Can I bring it to you to take a look at it for me? I am in the Bronx ... not too far from you. Thank you very much for your great videos and hope to hear from you.
sure, are you able to have someone follow you to leave it with me to get checked out or maybe you have towing to get it to me?
@@GaryFerraro Are you open today ... Sunday, July 11th?
I need to speak with ya good sir, dealing with some reduced acceleration in my 04 525i bmw I’m goin thru Hell with the back and forths and misdiagnoses… Any and all help would be Greatly appreciated for life! Thank you.
can you tell me if any codes are present?
@@GaryFerraro I cleared them with the little tricks to temporarily clear, but the engine malfunction and reduced power one has popped up a couple times, as well as the transmission code as well… I feel it might be celanoids or the ignition coils, sidnotes, I also have worn pistons, and have had burning oil very fast and frequently until using two treatments of RISLONE to stop the white/blue smoke upon start… it has stopped that, just got an oil change, it’s holding oil, and running great other than the reduced acceleration and lack of power… maybe battery recharge? I DID have some issues with my subwoofer and battery touching for a few weeks and it drained the car, but I fixed said wiring
Is there a shop number of yours I can maybe give you a call at sir 📞
@@zoothegiant my e-mail is gsferraro@yahoo.com
Do they fix the position sensor?
the one on the TCM, yes. Had a few done already
@@GaryFerraro is the the fault normally with the p0915 code
What is the definition of that code@@ant8121
@@GaryFerraro gearshift position circuit range performance General Electrical failure
what is the year make and model of your car?@@ant8121
Hello
HELP!
Hi Tim What are you working on?
I has the same issue happened, one pin broke off, transmission is a zf6hp21 i got a code for solenoid 3 and transmission want come out of park, i see you have the pin repaired, how could i do the same?
@@tmsmokeyful I send the TCM to Europe for repair
WWW.softelectronic.com
You can e-mail them.
Thanks so much!!!!
I broke the pin on my zf6hp28 too
Thanks for the info
Your video replaced not repair thank you
Sent it to Europe for Repair, Original unit was repaired
Can I contact you