2005 - 2021 Nissan Frontier Amp and Sub Install
Вставка
- Опубліковано 25 вер 2022
- Parts used linked in the description below!
Watch a full tutorial as a 2014 Nissan Frontier will have an amp and sub installed under the rear fold down seats. We will be integrating this amp and sub combo to the existing aftermarket radio.
NOTE: Our Frontier was not equipped with the upgraded factory Rockford Fosgate audio sound system. However, if you have an aftermarket radio, this shouldn't change your install at all. If keeping the factory radio, you will need a line out converter if your amplifier cannot accommodate a high level speaker input. Parts linked in the description below.
This video applies to Toyota Frontier models for years 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, and 2021. This video also includes trim removal, complete amplifier wiring instructions, complete installation, and testing.
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Rockford Fosgate P300-8P: amzn.to/3Sn7egI
*8 Gauge Amplifier Wiring Kit: amzn.to/3iWX7jK
*Pac Line Out Converter (2 Channel): amzn.to/2UcAXjb
--High Power Pac Line out Converter: amzn.to/33lRh5u
Other recommended parts (for crew cab) (Amazon Associate Paid Links):
*Nissan Frontier Crew Cab Sub box w/ Alpine 10: amzn.to/3dKghsN
*Alpine 600w RMS Amplifier: amzn.to/3xV3ue0
*4 Gauge Amplifier Wiring Kit: amzn.to/3zIWXT2
Disclosure: As an Amazon Associate I earn from qualifying purchases - Авто та транспорт
Parts used linked in the description of the video!
Been out the install game for about 20 years now. This video helps a lot. I can still do it. Thank you!!!
You make this so easy. I had a similar set up in my Jeep Liberty, and it looked nasty. I've been looking for a good video just for the Nissan Frontier (which I currently own) so I could do it myself a little bit better. Thank you for all the info!
Glad it helped!
I’m trying to hook up my system to my factory radio. Wires are ran. Do I connect my remote amp wire to the blue white like you said. I have a ‘19.
How many volts is the factory head unit I'm trying to set my gain on my subwoofer amplified
can you help me please I have no sound on my rockford fosgate ps-8 I have it connected to the stereo subwoofer connection and I also tried it with the rca audio out and it is not sound are light and the rest of the speakers YES
We customers realize selling products is in the interest of any dealer but please don't claim a LOC is "required" when most modern amps, and especially all powered subs, take high-level input and auto-turn on. Especially these Rockford ones do it superbly. Just splice a (front) car speaker wire and extend it to the sub = done. Only needs power+ground, nothing else.
I'm not a dealer, so no i'm not going to "require" you to do anything.
If I'm still running the stock radio if I cut off the RCA ends and hook up to the back speakers do I still need to run the remote turn on wire (blue wire) to the head unit?
No. All Rockford powered subs take speaker level input wires AND turn on based off of signal or dc offset in those wires as chosen on the built in amp. No need for a LOC as this video suggests. It's not the year 1883 in car audio anymore. Line out converters are completely useless.
How did you get the rca cable up to the radio that’s where I’m at
We used a wire hanger to help fish it up through the dash from under.
How do I get to the rear speaker wire to splice the rca ?
Need more context. If you have the same powered sub, you simply cut off the rca ends, strip the ends, and extend to your speaker wires in your vehicle. Alternatively use a line out converter.
How much was the job for this truck?
The parts we used are linked in the description, labor varies by shop, but I usually takes about 3-4 hours. I’d call around for rates from your local shops
So it has nothing to do with a 2018 nissan frontier since it has a aftermarket radio in it. Great.
Lol why would you strip the paint and cut the carpet when you had other options. Glad your not touching my vehicle