@@troy1stardon't let people get you down as long as you are having fun. I just got started on a g923 about to upgrade to r9 or r12 and just use my Logitech shifter and pedals at first
LOl, my wife bought a couch, I said that Im decorating the computer room with furniture in case her cool AF brother shows up. Full racing chair on the way, far sheaper than a couch
hey man i’m really curious on how you mounted your shifter if by any chance you could make another short just showing and explaining how you did this it would be very appreciated
@@wdodoo4707 my brother in christ, pcs have vents on the front, top, bottom and back. Even if it was right up against the wall in the back, which it cant be because shit has to be plugged in, it would still have plenty of airflow for the hardware inside.
@@liamnolan1663 Front intake = Rear, side, and top heat getting trapped. He has a flight stick blocking half the top. Front exhaust = Minimal intake from back, side, and top. Really no good choice here, every option is heat getting trapped or you getting no air.
@@RoyaC9 😂 dude he’s not trying to keep it in place. He’s resting his hand on it for the next gear. Like I said, it’s a bad habit it a lot of real stick drivers have.
@@NACS2023The wheel isnt the problem with the Challenge, it's the pedals. When you brake too hard the whole seat lifts up. You can see it happening in the video at the start. Also the little twist locks that hold the pedals in place arent strong enough, if you push too hard you will push the pedals away from you. Very annoying if you are using a load cell brake. I just bought a Playseat Trophy to replace my Playseat Challenge because of this.
@@The_Mup Ah yes I see, thanks. Honestly though, since I use VR, this might actually be better for immersion 😂. But anyway we will see, and if needs be I’ll probably upgrade my cockpit too
Using a playseat challenge x with an r9 and clubsport v3 pedals... a £10 3d printed band to remove the slight knock coming from the hinge on the wheel arm. It's pretty perfect for what it is. There's some flex in the wheel bracket, i could reduce this with extra support brackets but haven't felt the need yet. I don't notice it while playing. If you brake super hard, then yes, the front of the chair can lift but honestly, it tales a lot of pressure, if I were braking that hard to reach 100%, my leg would get tired pretty quick! I can brake way harder than it would take to trigger abs in any daily I've ever had. Although no, I couldn't brake at the pressure f1 drivers do, but they use their bodyweight from the reduced momentum, and I've no desire to get *that* realistic! My absolute biggest issue with it would be that it isn't designed for such heavy pedals, not in that they move around or anything thar causes problems in use, just that folding it up isn't as easy as I'd hoped. The pedals are so heavy and bulky, it's just awkward to fold up and move around.
Yeah wish it was more solid, unfortunately I use this space for other functions so from time to time I move it out. Otherwise I would have a more solid setup.
at first i thought you were trippin for the fsr but that mf is expensive plus the r9 and the crp pedals 😭. gotta do what you gotta do till it gets there😭
@@tonylewis1771 no, I'm far from jealous. Using a formula wheel with a shifter just looks ridiculous, if he wants to do it, good for him, he's having fun. Just couldn't help but laugh at it, and you
ain’t no way this guy is using a fsr formula wheel with a shifter 💀
Almost as if this guy is able to make his own decisions with the money he made himself, that’s such a crazy thought!
@@Halbury right?
Ahahahahahah
@@Halburydoesn't make it any less asinine. You walk around in crocs if you want as well, but don't expect people not to mock uou.
@paulgreen1733 pretty sure if he was worried about being kade fun of, he wouldn't have posted this. Just my thought though
His chair moving like it's motion one.
immersion
so much going on w this vid😭
Omg look how it bends
Ysing the fsr to cut up while using the shifter to shift is mad crazy💀💀
My plan is to get the regular wheel to go with the shifter. Just happened to get the shifter first. I’ll plan to have options.
@@troy1stardon't let people get you down as long as you are having fun. I just got started on a g923 about to upgrade to r9 or r12 and just use my Logitech shifter and pedals at first
@@knucklestheechidna5718 People will be people. They don’t bother me in anyway. I enjoy trying out things and making stuff work.
@@troy1star i feel u bro not all of us can afford all the nice shit at once
Those sounds are awesome
I think the lady will let me get one that folds away like this. lol
This is excatly why im buying this one, I mentioned building a DIY one and the first response was "Where is it gonna go"
not good for dd . I have before with accuforce 😂😂😂
LOl, my wife bought a couch, I said that Im decorating the computer room with furniture in case her cool AF brother shows up. Full racing chair on the way, far sheaper than a couch
hey man i’m really curious on how you mounted your shifter if by any chance you could make another short just showing and explaining how you did this it would be very appreciated
I can show you how I did with mine
@@bewellegoist please do. hmu when you upload
Thanks for showing that the cockpit dances while you play.
Dudes got a $1,200 set up on a $75 chair 😂
that pc is getting no airflow bruh
How so? It pulls air through the front and shoots it out the back, it's completely fine
@@MrSonnyfy shooting it back into the wall where it has nowhere else to go?
@@wdodoo4707 my brother in christ, pcs have vents on the front, top, bottom and back. Even if it was right up against the wall in the back, which it cant be because shit has to be plugged in, it would still have plenty of airflow for the hardware inside.
@@liamnolan1663 Front intake = Rear, side, and top heat getting trapped. He has a flight stick blocking half the top.
Front exhaust = Minimal intake from back, side, and top.
Really no good choice here, every option is heat getting trapped or you getting no air.
Isn't the shifter bolted in place? You seem to be holding it quite a bit
Its probably just a left over habit from driving stick irl.
@@trevor4533 That one is also bolted in place quite firmly, no need to hold it.
@@RoyaC9 😂 dude he’s not trying to keep it in place. He’s resting his hand on it for the next gear.
Like I said, it’s a bad habit it a lot of real stick drivers have.
Bro sitting so fart back feels like he driving from the back of the limo 🤣
He is not sitting that far back. What do you want? His face to be touching the wheel😂
@@RespectTheLegend console gamers cant comprehend what I mean 🙄 let alone understand anything about simulations.
@@filipivan5125 Oh wait you mean far back from the TV. I thought you meant far back from the wheel.
this seat is intended for belt drive wheels NOT DD monsters
I have one and looking to buy the Moza R5. Do you think it will hold up alright?
@@NACS2023The wheel isnt the problem with the Challenge, it's the pedals. When you brake too hard the whole seat lifts up. You can see it happening in the video at the start. Also the little twist locks that hold the pedals in place arent strong enough, if you push too hard you will push the pedals away from you. Very annoying if you are using a load cell brake.
I just bought a Playseat Trophy to replace my Playseat Challenge because of this.
@@The_Mup Ah yes I see, thanks. Honestly though, since I use VR, this might actually be better for immersion 😂. But anyway we will see, and if needs be I’ll probably upgrade my cockpit too
9nm a monster now huh
Using a playseat challenge x with an r9 and clubsport v3 pedals... a £10 3d printed band to remove the slight knock coming from the hinge on the wheel arm. It's pretty perfect for what it is.
There's some flex in the wheel bracket, i could reduce this with extra support brackets but haven't felt the need yet. I don't notice it while playing.
If you brake super hard, then yes, the front of the chair can lift but honestly, it tales a lot of pressure, if I were braking that hard to reach 100%, my leg would get tired pretty quick! I can brake way harder than it would take to trigger abs in any daily I've ever had. Although no, I couldn't brake at the pressure f1 drivers do, but they use their bodyweight from the reduced momentum, and I've no desire to get *that* realistic!
My absolute biggest issue with it would be that it isn't designed for such heavy pedals, not in that they move around or anything thar causes problems in use, just that folding it up isn't as easy as I'd hoped. The pedals are so heavy and bulky, it's just awkward to fold up and move around.
Thought it was a motion rig at first lol. Playing on a screen that high and far away is crazy
Craziest flex lol not talking about the set up but talking about the 🐑 commenting bs. Bravo 🙏
This setup dances like a belly dancer, thanks to the flimsy Playseat. You enjoy it regardless though, kudos.
I’m so happy I didn’t go with one of these play seats. I was really close too.
The rig, the wheel and shifter, the right shifter on right hand driving? 😂😂😂
Needs support bars for flex on base plate
I had to read that 3 times, I swear you said support bra.....
Dope but too much flex for me
Yeah wish it was more solid, unfortunately I use this space for other functions so from time to time I move it out. Otherwise I would have a more solid setup.
Make it work, use ratchet straps if you have to. It’s nice love the wheel
@@leom9659 I might have to do that. I'm looking for a foldable sim seat and this style seems most practical.
@@troy1staruse the strap mod, so you can push without flexing
Can you teach me how to secure a gearbox so that it doesn't spin?
I’ve been looking into the R9 bundle. Worth it?
Absolutely
How you liking racing? Think you'll be doing it long term?
Is it safe for wheelbase to endure so many vibrations? Won’t it shorten its lifetime?
Why is Hamilton using a shifter with a formula wheel?
How do you like the wheel? Im considering a r16 or r21 if i dont stay with fanatec when i upgrade
Curious for a response here as im looking into a r16 upgrade from logitech g29
Flexing is the only word
Hi bro! Where did you get the mount for shifter? Thanks!
Made out of crap metal i had in my garage.
I know I’m being a pleb by saying this but you shouldn’t keep one hand on that style wheel just in case you crash or some shik
Moza needs to work on the eay there ffb is delivered.
What? Bro it’s a 9nm wheel base on a cheap play seat. There’s going to be flexing in it regardless of the FFB delivery.
at first i thought you were trippin for the fsr but that mf is expensive plus the r9 and the crp pedals 😭. gotta do what you gotta do till it gets there😭
Fkin fsr wheel with a shifter wth 😂
he has the ability to use both? so what? you jealous? manuals are more engaging
@@tonylewis1771 no, I'm far from jealous. Using a formula wheel with a shifter just looks ridiculous, if he wants to do it, good for him, he's having fun. Just couldn't help but laugh at it, and you
What’s with the shifter and f1 wheel last time I checked those are in two different cars
Nice seat and awesome wheel. Tv too high and too far.
Are use the space for multi-purpose. So I have to move the gaming set up out sometimes.
Why is bro stick shifting with an formula wheel
Because that us what he wants to do. Its all about doing what we like not whether someone else would do the same thing. Lets grow up.
You can hold your wheel with both hands and grab the shifter just when you need to shift. Its about being fast, not about looking cool.
Did you need to buy the official table clamps from Moza for this?
What game and planform?
F1 wheel has paddles shifters 😂
Bro be playing nba 2k with this setup hell nah tf is this bro got a shifter with a fsr i cant😂💀
How much power did you put in your base?
9nm
The flex is real and why this guys online be hugging their shifters lol and driving with one hand ?
That’s a lot of flex
How’d you mount the shifter?
please im trying to do the same
Yo what game is this?
Way too much flex on the play seat, really ruins the direct drive experience
Thank you for showing that the R9 is not that strong if can drive one handed. Try playing F1 game instead
nothing new i put simx wheel on it and it last it but became motion simulator 😂😂😂
Para eso prefiero mi mesa porque no veas como se mueve
Just use the fuckin paddles
Hamilton :- ) ?
🤣🤣 spend all this to use a toy rig and buys the wrong wheel for what he is actually driving. Some people are so clueless
GT na manualu xD
Get a circular wheel, won't regret
he didnt even learn the basics of driving . ur supposed to use 2 hands on the wheel . and minimise time holding theshifter
a direct drive wheel with a cheap seat, a f1 wheel with a shifter playing these kind of game. Nothing is good in that video
I don’t care what anyone says blah blah, this shit is hurting my eyes
Wow way to much flex in the rig no thank you
$2000 dollar gear on a $300 rig 🤦
I'm doing the opposite lol
@@klikklak6099 That is a better investment
You seem to be getting a lot of unnecessary advice. I'm not sure why?
Bruh…
This video is painful to watch.
I beg you get a better seat and rig
Cockpit.........
Formula wheel in a street car.. Doing no hesi.. On a $1000+ sim rig, with an $80 stand... Brainrot detected
I also come on UA-cam just to cry sometimes. Great way to let off steam, isn't it?
🤮🤮🤮🤮 😂😂😂😂😂
What's the game's name?
Assetto Corsa
@SnowNasty ua-cam.com/video/lTGW0Edyz1c/v-deo.htmlsi=VC6NF_SKyzm9sq9v
what chair is that im looking for one for my r9
Read description..
@@TheFrontyer Dont get this seat for a R9 . The wheel mount will have too much flex as you can see.
It's the Playseat Challenge