Top 5 Must Have Tools
Вставка
- Опубліковано 7 чер 2023
- Join this channel to get access to perks:
/ @flatratemaster
Amazon Affiliate link below
Astro Tool 7835 Protective Thin Wall Impact Socket Set - 5-Piece
amzn.to/3LACQ1K
Vessel Megadora 980 Impacta P2x100 #2 Cross Point Impact Screwdriver
amzn.to/3FvZnsH
VESSEL MEGADORA IMPACTA Impact Driven Screwdriver +3x150 (6") No.980 980P3150
amzn.to/3FCjFAC
Mayhew 61366 Dominator Pry Bar Set, Curved, 5-Piece
amzn.to/3TpCg8U
KNIPEX Tools - 2 Piece Cobra Pliers Set
amzn.to/3lnOcva
KNIPEX - 74 01 250 SBA Tools - High Leverage Diagonal Cutters
amzn.to/3LBtyTc
IAG Performance Multi-Directional Hose Clamp Pliers
amzn.to/40BX1AL
Vim Tools TMS34PF Torx Master Set 34 PC
amzn.to/3yO6clo
Vim Tools VIMMMS64 Mechanics Master Set, Hex & Torx
amzn.to/42C3v4r
Lisle 45900 Hood Prop
amzn.to/42rZkIj
Trusty-Cook Model 3-45 oz Polyurethane Dead Blow Hammer - Red
amzn.to/3Z5mMrD
www.amazon.com/shop/influence...
www.amazon.com/shop/influence...
www.milwaukeetool.com/
#flatratemaster
Instagram
/ flatratemaster
flatratemaster@gmail.com - Авто та транспорт
Surprised you didn’t recommend a portable fan
he should though! dude is sweating a river
Whatever kind he’s got clearly isn’t very good 😅
Lol
I see You've got things covered here.... However. Well, I reckon, I've come all this way; Ize might az wellz sayz my piece...Milwaukee fanboy should see if there is a Milwaukee fan.. boi that was a waste of time reading. Wasn't it?
😂😂😂😂
Loves em so much he’s sweating over it
I got those swivels almost a year ago. Main reason I bought them was to get my plenums off my m5. Totally worth every penny
You got everything right on quality I trust you 100% now it’s 99.9 due the the Quaker Hat lol
Not a fan of Matco tools, I do agree with you on the swivels. They are hands down the best swivels period. And yes. “Stupid expensive”.
I used the gray pneumatic GRE9712UMG swivel socket set and can say absolutely love them. But pricy but bet cheaper then the Tool truck
Those Matco swivels are amazing, and the only tool I own by then lol
Parts number?
@@kelvinfernando5903SCUPM136V
I have the matco swivels in 1/4, 3/8 shallow and deep, and 1/2 worth every penny! Great pinless design.
I've got the sunex swivels in 12 point, not cheap but definitely not stupid expensive. To me Milwaukee classifies as stupid expensive. I've got the Hercules 3/8s extended reach ratchet and if I run into a situation were I'm going to need a 1/4 inch repeatedly I can afford to buy that one too
I was thinking of getting the SUNEX swivels. I think they were magnetic too.
I agree with this list!
Thank you! 🙏🏻
The gray pneumatic swivels I believe are the same as the matco ones. If I'm not mistaken they make them for matco and you can actually get them pretty cheap online without the matco name on them. I bought the 1/4 impact master set for less than the cost of just the swivels from matco and I love that set, use it everyday.
Think they make the matco ADV ones not the expensive ass ones that are like $500/600 a set.
I went from working as a auto technician to a body shop back in December… and the first 4 tools are literally the l tools I use more
Glad to hear you made that switch I encourage a lot of people that are fed up as being auto-tech to go into Autobody.
Scan tool, volt meter, alligator test leads and Astro swivel light.
Why are you so sweaty scotty
Great choices
Are you recording from inside an oven?
Sunex and DeWalt Swivels 💯
I was a flat rate mechanic, now retired. Never owned any of that crap. Owned plenty of less expensive options.
Dig the quaker state hat
I love think bros a tad warm
Trevor from GTA V?
Omg you’re right been watching him for years too 😭
1) Hammer 2) adjustable wrench 3) large screw driver (for prying). 4) pliers 5) twist wire and zip ties.
Go hypertough extended reach
How much is that swivel
Where can I buy the aircraft tool used as a panel tool?
Amazon
What is it called? Link?
If you can't afford a whole set of swivel sockets, you can buy just a swivel and attach your sockets to it. Its not as good as the sockets, but you can still do 80-90%.
Too big and bulky usually and there is more torque loss than with a traditional swivel. I rarely find them useful. When I need a swivel generally there is very little room to work with and I need the sockets to be as small and short as possible.
Sunex? 🤔
Can't click on the web links or copy and paste.
Do you have a link for that aircraft panel tool
I found it searching: metal magery sheet metal pry bar
And yes, I replaced it when I lost the first one
@@mxpants4884 👍
@@danielc296 It's weird because you would expect it to mar plastic more than a plastic one but it's the opposite. Maybe because it's thinner?
SnapOn sells them.
I got mine on Amazon
U look like if willam dafoe and trevor phillips had a child
You should review a fan or air-conditioning never seen anyone in a video sweat this bad
Buy a sweat rag.
330$-$600 for 12 sockets? hell no
Did this guy just watch cops or something?
✝️Christ died for our sins was✝️ buried and rose again
John 3:16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 🙏❤
repent and believe 😊 remember Jesus
loves you❤ no matter what
why not buy them from the people who make them for matco?