I love the use of black panels, the cheapest in the rig but great for immersion. If you would disable cockpit movement would look better to avoid seeing the disconnection of virtual vs real stuff.
Thanks! Yeah, the black panels are awesome and great for immersion! You’re right about the cockpit movement. I tried to fix that. In acc it’s okay now, in AMS2 I am still struggling with that
I might need to move my rig to another room within the next couple of months so there I can and need to paint the room again. So will take a look at that colour 👍🏻
Awesome rig, mate! Kudos for showing your face. It seems to take more courage for those faceless sim racers to reveal themselves than to race in reality, haha. Subscribed!
Thanks! ☺️ I would highly recommend it. It gives a much more immersive experience then without the kit. It's not a motion system and far from, but it's very subtile and isolates the vibritions from thr bass shakers. Here's My review and experience: www.simracinghub.nl/en_us/slip-angle-review/
Thanks man! ☺️ 🙏🏻 I am running a Msi nvidia rtx 3080 gaming trio 10gb. I am considering to upgrade this card but not sure which one I should take. Cpu is a intel i-7 12700K
That's an awesome setup! I'm curious to know how much space it takes to fit in a room (width and depth), because I'd love to have something like that someday, but I don't know if it would fit in my apartment.
Hey, ik ben bezig met het bouwen van dezelfde rig. Wil nu 3x monitors gaan kopen. VR is niet zo mn ding. Wat is het exacte typenr van de msi monitoren? En zou je weer dezelfde kopen of toch misschien platte 32inch? Thanks!
Gaaf! Het typenummer van de monitor is MSI Optix MAG322CQR. Deze zijn volgens mij niet meer verkrijgbaar. Ik zou sowieso weer voor curved monitors gaan! Geeft veel meer beleving dan platte monitors.
@@SimRacingHubNL Thanks! Heb op MP complete set gekocht. Simlab GT1 evo rig, fanatec dd1 wheelbase, clubsport v3 pedals etc etc. Diverse sturen, Alles bijna nieuw! Nu dus de monitoren nog. Had al gegoogled wat jouw schermen waren maar kreeg het niet gevonden. Heb nu een alternatief denk ik: MSI G32CQ5P 32inch bijna dezelfde specs lijkt het. En mooi betaalbaar. Ik ga je volgen, heb me aangemeld. Jij hebt gewone simlab 3monitor steun gekocht met vario vesa? Ongv 300eu zag ik. THANKS!
Als de specs vergelijkbaar zijn dan is het goed! Klinkt als een goede deal. Ik heb de Sim Lab integrated monitor. Die moet je alleen wel zelf verstevigen met profielen omdat ze anders door buigen. En inderdaad de adapters om ze uit te lijnen ✌🏻️
Amazing rig. Ive been considering a similar style roof but I habe some concerns about difficulty stepping in and out of the rig. How have you found that?
Thanks! 🙏🏻 Getting in and out of the rig is quite a challenge to be honest, but in my opinion definitely worth the extra level of immersion. I have to enter the rig on the left side, on my knees. I will post a video of it soon 👍
Hi, I'm very curious about the SLIP ANGLE, I want to buy it but I want to know if with those springs it only gives vibration or also some rebound. It would be incredible if you could make a video focusing on the springs in a game. But if it's too much of a bother, I'll be happy if you give me your opinion. thank you so much!
Haha lol. Yeah that’s definitely entertaining to see 😆 It’s quite a challenge: on m knees via the left side 😎 Will post a video of it soon I guess. Lot of people are asking that question 😊👌🏻
That is a nice Rig. And the retail value is?????????????? I know, if I have to ask, I definitely can't afford it. Also I can't justify having/investing in something like that just to play racing games, unless you are getting paid a good amount to race. Take care.
@@SimRacingHubNL Thanks for the link to your story on the Racing Rig. I may invest in a better wheel controller in the future. I use a VR headset when I race, so I wouldn't be able to see all the Rig controls or need triple monitors. Enjoy your racing. Take care.
@SimRacingHubNL No like the dimensions of the whole set up. For example the width would be like the widest points of the set up which i assume would be the screens. Basically the dimensions of the smallest rectangle the set up would fit in.
Your setup is incredible!!!
Thanks! ✌🏻️🙏🏻🔥
I love that dashboard, you could say it's "Lovely" 😍
Haha I bet you do 😄🏆 It's awesome mate. Awesome. Well, wait. Just a more detailed weather dashboard would make it awesome 🏁✌🏻️
I love the use of black panels, the cheapest in the rig but great for immersion. If you would disable cockpit movement would look better to avoid seeing the disconnection of virtual vs real stuff.
Thanks! Yeah, the black panels are awesome and great for immersion! You’re right about the cockpit movement. I tried to fix that. In acc it’s okay now, in AMS2 I am still struggling with that
@@SimRacingHubNL Black Gaffer Tape is super awesome too.
Nice cockpit. Thanks for this video.
Holy f, thats insane man. Enjoy every second in it💪
Thanks man! ☺️🙏🏻 Yeah I will! 🏁
It really helps painting the walls a very dark color for immersion it keeps the light from reflecting back off the wall from the screen.
I know, but my wife won't let me do that 😆🤪
@@SimRacingHubNL really? It was my wife's idea. I didn't even cross my mind. I was completely blown away!
@@SimRacingHubNLBTW my wife said to tell her her the color that we used is Cavalry from Glidden 🏁🏁
I might need to move my rig to another room within the next couple of months so there I can and need to paint the room again. So will take a look at that colour 👍🏻
Or vr hehe
Awesome rig, mate! Kudos for showing your face. It seems to take more courage for those faceless sim racers to reveal themselves than to race in reality, haha. Subscribed!
Thanks man! 🙏🏻 Yeah, you're right. Getting in front of the camera and talking took some courage 😆 🙈
Lekker bezig !! gruwelijke set up !
Thanks Stephan! ✌🏻️
Awesome rig and set up mate! Can you give us a rundown on how you upgraded that beautiful roof to its final state? Cheers
Thank you so much! 🙏🏻 Here's My blog post on how I have made this roof 👉🏻www.simracinghub.nl/en/building-a-diy-sim-racing-roof-in-9-steps/
@@SimRacingHubNL simple and straightforward! Thanks buddy and keep up the good work 👍🏼
Thanks mate! ☺️🏆🔥
Hi! I can't find any info about the diffraction thingy (I'm not sure what it is exactly) but helps you hide the bezzels between monitors. What is it?
Hi! It’s the ASU’s bezel free kit 👉🏻 www.simracinghub.nl/en/asus-bezel-free-kit/
Beautiful and qualitative!!!!
What more can be said.....
I'm hesitant to get the Slip Angle. I already have schaker on my seat, what do you think?
Thanks! ☺️ I would highly recommend it. It gives a much more immersive experience then without the kit. It's not a motion system and far from, but it's very subtile and isolates the vibritions from thr bass shakers.
Here's My review and experience:
www.simracinghub.nl/en_us/slip-angle-review/
Beast of a setup… Loving it!! Which graphic card and cpu do you use?
Thanks man! ☺️ 🙏🏻 I am running a Msi nvidia rtx 3080 gaming trio 10gb. I am considering to upgrade this card but not sure which one I should take. Cpu is a intel i-7 12700K
What is the angle of your left and right monitors? Thanks
It’s around 50-60 degrees
That's an awesome setup! I'm curious to know how much space it takes to fit in a room (width and depth), because I'd love to have something like that someday, but I don't know if it would fit in my apartment.
Thank you so much! 🙏🏻☺️ The Total width is around 130 cm and the lenght around 185cm. It's a quite compact rig fue to the integrated monitor mount
@@SimRacingHubNLThank you! I appreciate the quick reply, and it's a lot more compact than I would've thought!
how do u connect that Wheel (Correct me if im wrong but it isnt a fantatec wheel right?) to the Fanatec wheel base???
You need to have the Fanatec Podium Hub to mount other wheels to your Fanatec base 👍
W rig!
Wicked set up what are you using to film the pov races with ?
Thanks! I use a GoPro 11 for shooting the POV videos 👍
Very cool! Well-thought-out setup. Nice work! 🙌🏻
Thanks Mike! 🙏🏻🏆
Nice setup
Thanks!
Hello, what is your rig ? Good Setup !
I have the Sim Lab P1x 👍🏻
@@SimRacingHubNL Thanks 🙏
@@SimRacingHubNLHey, I have a new question, can a have the dimensions of your setup length and width ( with screen support )
Hey, ik ben bezig met het bouwen van dezelfde rig. Wil nu 3x monitors gaan kopen. VR is niet zo mn ding. Wat is het exacte typenr van de msi monitoren? En zou je weer dezelfde kopen of toch misschien platte 32inch? Thanks!
Gaaf! Het typenummer van de monitor is MSI Optix MAG322CQR. Deze zijn volgens mij niet meer verkrijgbaar. Ik zou sowieso weer voor curved monitors gaan! Geeft veel meer beleving dan platte monitors.
@@SimRacingHubNL Thanks! Heb op MP complete set gekocht. Simlab GT1 evo rig, fanatec dd1 wheelbase, clubsport v3 pedals etc etc. Diverse sturen, Alles bijna nieuw! Nu dus de monitoren nog. Had al gegoogled wat jouw schermen waren maar kreeg het niet gevonden. Heb nu een alternatief denk ik: MSI G32CQ5P 32inch bijna dezelfde specs lijkt het. En mooi betaalbaar. Ik ga je volgen, heb me aangemeld. Jij hebt gewone simlab 3monitor steun gekocht met vario vesa? Ongv 300eu zag ik. THANKS!
Als de specs vergelijkbaar zijn dan is het goed! Klinkt als een goede deal. Ik heb de Sim Lab integrated monitor. Die moet je alleen wel zelf verstevigen met profielen omdat ze anders door buigen. En inderdaad de adapters om ze uit te lijnen ✌🏻️
Where did you get the roof?
It’s a DIY project. Here’s how I did it: www.simracinghub.nl/en/building-a-diy-sim-racing-roof-in-9-steps/
Sick looking rig! Mind if I ask what’s the width of your rig? I’m debating whether I should go 27 or 32
Thanks! The total width of my rig is around 1.30 m :)
@@SimRacingHubNL lovely!
Good job!! whats the size of your monitors?
Thanks! These are 32”
Hey, can i have the dimensions of your setup length and width ( with screen support ) pls 💪🏻
Yeah sure, no problem! The dimensions are 135 width and around 180 cm length
@@SimRacingHubNLThank you so muchhh
Amazing rig. Ive been considering a similar style roof but I habe some concerns about difficulty stepping in and out of the rig. How have you found that?
Thanks! 🙏🏻 Getting in and out of the rig is quite a challenge to be honest, but in my opinion definitely worth the extra level of immersion. I have to enter the rig on the left side, on my knees. I will post a video of it soon 👍
Thanks for the reply. I'll look forward to the follow-up video
Hi, I'm very curious about the SLIP ANGLE, I want to buy it but I want to know if with those springs it only gives vibration or also some rebound. It would be incredible if you could make a video focusing on the springs in a game. But if it's too much of a bother, I'll be happy if you give me your opinion. thank you so much!
I think this article answers a lot of your questions 👉🏻 www.simracinghub.nl/en/slip-angle-review/
Looks sick! , what monitors are those?
Thanks man! ☺️ These Are 32" curved MSI monitors (1440p / 165hertz)
Man all those buttons you might as well be flying a space ship 😊
Haha lol 😆 😂 You just cant have enough buttons 😉
@shaneWARs1 😂
What are the dimensions of ur rig in terms of area it covers measured at floor level.
The width is around 130 cm and the lenght around 190 cm 👍🏻
What is the monitor brand and size?
These Are 32 " curved MSI monitors 👍🏻
How the hell to do you climb in there? I'm sure it would be entertaining to see. LOL
Haha lol. Yeah that’s definitely entertaining to see 😆 It’s quite a challenge: on m knees via the left side 😎 Will post a video of it soon I guess. Lot of people are asking that question 😊👌🏻
I have a video online now on how to get in!
Nice rig what monitors are they?
MSI 32" Curved 1440P
Sorry if I missed it. But did you mention what monitors you are running?
Whoops....😂 forgot that lol. I have 32" curved monitors from msi.
You didn't mention your pedals.
Yeah you right! It’s too dark to film there due to the black panels. But I have VNM Lite Pedals with haptics from Simagic 👍
Monitor size?
32" curved MSI monitors
this is a space ship
would love to know your settings for sim hub
What settings do you want to know?
@@SimRacingHubNL all of it how u set up the shakers i hAVE THE SAME SYSTEM BUT NEVER GET A GOOD FEELING
I just use the base profile from the slip angle website 👍🏻 have Done some slight tweaks after
That is a nice Rig. And the retail value is??????????????
I know, if I have to ask, I definitely can't afford it.
Also I can't justify having/investing in something like that just to play racing games, unless you are getting paid a good amount to race.
Take care.
Thanks man! The retail price of this setup is around 18K at this moment. Here's a full list of my Setup 👉🏻 www.simracinghub.nl/en/my-sim-rig/
@@SimRacingHubNL Thanks for the link to your story on the Racing Rig. I may invest in a better wheel controller in the future. I use a VR headset when I race, so I wouldn't be able to see all the Rig controls or need triple monitors.
Enjoy your racing. Take care.
What are the dimensions of the footprint of your rig?
do you mean from the Speedy Rug carpet?
@SimRacingHubNL No like the dimensions of the whole set up. For example the width would be like the widest points of the set up which i assume would be the screens. Basically the dimensions of the smallest rectangle the set up would fit in.
@@devoemewborn9541 ah okay, now I get it ;) The width of the rig is around 130 cm and the length is 185 cm