How To: Remove\Install A LS Oil Pump Install. (While Engine Is Still In Car.)
Вставка
- Опубліковано 19 жов 2024
- When changing the oil pump when the engine is out of the car is simple, but if the engine is in the car it proves to be difficult. Terry shows how he replaces an LS oil pump with the engine still in his car. Check out the links to the parts used in this Video and leave a comment.. love to know what you think..
Link To Parts used in this video can be purchased:
BTR LS3 Stage 2 Cam Kit amzn.to/3EPSAti
BTR LS3 Stage 2 Cam Kit w/o Timing Cover Gasket & Bolt amzn.to/3SGtWRO
LS OIL PUMP - HIGH VOLUME. amzn.to/3I4dQwi
Improved Racing LS Engine Oil Pump Pickup Tube Brace. amzn.to/3xlwGdp
Mahle LS Oil Pump O Ring. amzn.to/3I4dQwi
If you like these videos, the best way to say thanks and support is to hit SUBSCRIBE AND THE THUMBS UP. Thank you very much..
Remember, Subscribe and Like All the Videos..
Watch for more Garage Shop Videos Catch me on:
UA-cam: / coverman66
Instagram: / terrylsx
Facebook: / jaggieman
TikTok: / coverman66
Subscribe Here: / @coverman66
Thanks for all the Support.. Much Appreciated...
#coverman66 #LS #oilpump
Well done video. You did not waste my time and you got right to the point. While I have been working on cars for 50 years I always go to the manual and internet for info on jobs I have not had to do. Well done. I am not a patient person.
Hey bro I don’t know if you’ll see this but thank you for this video. It’s pretty similar to a Silverado which is my truck the one I’m gonna change the oil pump on. I’m 16 years old and this is gonna help me a lot, I’m not trying to spending $800+ for someone to do this for me when I can learn to do it myself and it makes me more independent I guess! Thank you I’ll update you on how it goes!
yea i get to all my messages. thanks brotha TS.. 16 and doing this is wonderful.. if you have any questions.. reach out and i will help the best way i can.. please keep me posted thanks again.. you are the future..
@@Coverman66 That's right real mechanics always offer help good man bro good man
Dude I was told $1800 🤣🤣🤣🤣
Great tip on the support braket for the other side of pick up tube to the oil pump. I already installed my new pick up tube, gm performance oil pan and my new melling oil pump. But no worries, thanks to your vids I still can install that new braket if I need it.
my pleasure broytha MIC
Thank brother, very helpful. I dropped the oil pickup bolt w/oil pan still attached. Then just put the bolt on other side. Saved lots of time and headache..
thanks QF.. much appreciated..
Love the energy
Thanks brotha Sean.. much appreciated..
Dude... l´m dealing with an oilpump on a v8 Trailblazer myself right now and came to UA-cam to look for a video for not messing anything in the process; couple hours ago l went to Costco and saw the same hat with the lights that you´re wearing... you just got another subscriber. Great video btw.
lolol my mother got it it for me.. i think she did say it came from costco lolol small world lol great hat..
Thank you for sharing your installation and part number for the improved performance o ring brace. I’m going to install one of those o ring braces on my Silverado next week when I replace my oil pump.
Terry nice tip again, Bro you are always helping us DIYers, thanks
lolol thanks brotha Zo..
Never understood why GM makes 2 ways to put bolt in but put it in the hardest spot engineers are genius
good question..
Heck yeah.... Bet that took some patience, lol. I got the same Improved Racing brace on my lm7 w/new oil pump. It really made me feel better having it when I bolted the pickup on knowing that I lowered the possibility of pinching the O-ring. Well worth the 24 bucks!
love those lil brackets..
Very nice tip on how to make it easier!
much appreciated.. thanks
Terry! You are back. I watched your LY6 video a year and a half ago and bought a L96. Yesterday I installed the cam. Today I removed the oil pump. Took me all day. :) I hope to be on the road by year end.
keep me posted.. im glad you doing it yourself brotha..
I did a c6 oil pan conversion on my tbss. New pickup tube has the mount bolt in the front facing hole. Making oil pump replacement easy. Also the c6 pan save the bearings on hard launches. Drop the rack on one side to swap pans
yea i went with the baffle install, if i was racing, i would of done the c6 pan.. what did you do about the 2 bolts that hold part of the compressor to the pan?
@@Coverman66 the a/c bracket(billet aluminum) is from leftcoast32 he is on the tbssowners.com site, he also sells a aftermarket crossmember that sits under the oil pan
got it.. thanks..
Really wish I wouldve watched this video yesterday lol wouldve saved me a headache.
thanks for the comment.. what are you working on now?
coverman66 2007 tahoe 5.3. Broke tensioner and ate the face off of the guide then pumped pieces of them and some metal shavings, from chain rubbing on metal bracket, through the motor. So no longer a timing chain job but a full on rering job now. Found the heads to be cracked between valves on a few cylinders so waiting on some replacement castings. Original ones that cracked were 799 castings so going to throw a set of 243 castings in and hope for another 150k out of it.
Ermias Asghedom i ended up lifting motor and lowering pan a bit. But there was more damage than expected so motor is out and getting freshened up now. Just waiting on new head castings at the moment.
wow, how are the 243 heads? will you have them checked out?
thats great.. keep me posted.. love to know when you start...
great video and editing my man! Thank you for the knowledge!
Appreciate it! thanks for the comment.
Awesome upgrade , had never heard of this one, great video terry.
thanks brotha RH.. much appreciated..
I really appreciate the information you put in this video
I'm struggling with my silverado 1500 doing the same shit atm
Thanks bro
much appreciate.. let me know if i can help.. keep me posted..
Thanks Terry, Now I know I need to drop my pan
is the engine out of the car?
coverman66 No, still in the car and hopefully staying there
Mohamed Ali Klay 😳 Mechanic works
lolol whats good brotha 2.. i get that alot partner..
Got Daymn, another awesome video!
thanks brotha Sov.. much appreciated partner..
@@Coverman66 Alright, my man! Always a pleasure brotha!
I got a 2012 suburban.. lifter knock but not at all times.. mainly when off gas, when throttle down or revs up no ticking, let off gas and ticking occurs
Great Video! Thank you!
my pleasuare brotha Free.. thanks
Yes sir how are you love you WORK keep up the good work question can I use trailblazer spring to help lower my Cadillac Escalade 05
ive never tried that.. let me know how that works out.. thanks for the compliment.. much appreciated
Also great vid, very helpful. Thanks
Nice job.
Good Info man..Thanks
much appreciated brotha.. thanks..
Great video Terry...
thanks brotha J..
Great video stright yo the point no b.s thks
thanks brotha Peter.. much appreciated.
Love the way you do your videos. I have a 02 Mercury Mountaineer that needs an oil pump. Do you know if this will also work for mine?
thanks brotha Yooper.. i cant answer that because ive never worked on a mountaineer.. wish i could help..
T Martine, What size engine is in your Mercury mountaineer? I could look it up easily but if it's a certain engine that I think it is I could just tell you cuz I've done many of them
Like Ali you’re the greatest!
aaaw man i appreciate that.. thanks brotha 68..
Did you have to change your oil pan gasket when you did what you did?
Huge fan of your videos. Got a few questions. Will a high volume oil pump, pump out the oil pan too quickly. I’m thinking of installing a Melling high volume on a 2012 suburban with a 5.3 liter. It’s got 130,000 miles. We have replaced the lifters, and all new gaskets and seals. We replaced the o-ring on the oil pump, but we only get 17-18 psi at idle and 35-40 psi at highway speed. The lifters will get a little noisy when the car is parked on a slight uphill grade just idling at 500 rpm. We did replace the Vlom as well with a new sending unit. What are your thoughts. Thanks
i would stick with a GM oil pump.. ive always used them.. which lifters did you install?
1x time for the algorithm
Great video
much appreciaated. thanks
I have a question
If your pick up oil o-ring going out and you keep on driving it Could it mess up the engine.
i would change it, low oil pressure will damage your engine.
Hey Bud, have aN 07 TB SS AWD . Do I have to pull the front drive axles Etc in order to drop oil Pan enough. Doesn't look like I can get all the bolts without more disassembly.
P.S. Doing all this in my single stall apartment garage
you might have to.. unless you can lift the engine enough to get to that bolt..
tip top channel,replaced lifters cam oil pump etc etc 15 thousand kilometres ago BUT the pickup was filthy and its now blocked up a lifter and its tickin its damm head off ,ive changed oil and filter three times and tried different weight oils all the way up to 40w70,im thinkin i should go the other way and try a 5w30 synthetic ,i really hope the lifter will come good ,LS1 in a Holden or you fellas call a Pontiac GTO ,any advice greatly appreciated mate
so you dont have to replace or add sealent to the oil pan gasket? asking because i may have to change mine out. any info is appreciated.
if you are opening it up a lil reseal the corners.. but if i always change mines esp with high miles on them..
Can you please put a link to where you bought that pickup tube clamp... thanks
whats good brotha DJ, the link is in the description with all the details. Improved racing, let them know Coverman66 sent you. lolol
Did you just tight the bolts on the pan or did you add a little bit gasket silicone
a lil silicone in the corners where the caps meet the block.. not too much but use a nice amount
Is there a special way the gear on the oil pump needs to be positioned or lined up
just put it on and bolt it down.. you should be fine..
I'm doing one on a 4wd 1999 1500 is there a way to get around dropping the pan. Front diff is also in the way
i iwsh i could say i know of one brotha. if you find a way please let me know.. to get to that tube bolt its hard without dropping the pan.
Terryyyyy plzzz help!! 😂man how did you get that motor up?!?! I understand the concept I just need to kno how you got it up!! thanks in advance homie!
loosen the engine and tranny mounts and jack the engine up until i was able to drop the pan a little. hope this helps..
Hey Terry! Great channel brotha, by chance do you have the part number for the cam kit ?
briantooleyracing.com/btr-ls-cam-kit.html
let me know if you have any questions..
Cassius Clay Shop!
lolol you know it brotha Al.. thanks..
Nice work Terry what about the oil pan baffle everyone talks about dud you do anything to it ?
the baffle is still in place.. it wasnt removed.
Good stuff man. I am having a problem with the oil pan sitting on top of the steering rod. I swapped a 430 Nail Head engine with a 350 small block crate. Is it possible to modify the oil pan by taking off two inches of sump and still fit the pump into the pan with the pick up tube and screener? Or should I just scrap it and swap with an LS instead of a 350
i think you know the answer im going to give lolol i love the LS engine.. but you could just replace the pan.
coverman66 😂 right on. Yeah, I have to get someone to manufacture a oil pan for me. The 350 pan sits on my steering rod.
No shimming of the oil pump for proper alignment to the crank???
wasnt necessary.
When is it necessary to shim ?
damn Terry i left a long message but i dont see it,oh well,i just did a entire swap,a 2011 6.0 from a silverado 2500 hd into a 05 blazer im injured ,every disc in my neck is blown so i have bad nerve damage in both arms,i just completed the swap,and no oil pressure so i get to tear it all up and start over,im so bummed,i have a trans dapt swap in the box kit and in the beginning i was going to pay a guy,well all he did was sit the engine in and thats it,the truck intake hit the heater core,so i had to swap to a ls3 intake,looks amazing with ICT billets brackets for ac and alt,so i installed a TSP stage 1 cam well when doing so i could see in the oil pan and the oil pick up has 2 bolts not 1 and they only put 1 bolt,ok,the hard to reach one,so i was like wtf,and i put a 10mm little bolt in,but now im thinking they didnt even put a o ring on it,since one doesnt come with the kit uh huh hear me now lol so im hoping and praying this is it Terry ,so i might as well replace pump since im there too ,well cross your fingers for me my friend,love your personality ,cool and good people are hard to find now days it seems.well here we go again.take care
OWU, i wish you were closer. i would come and help you out in a second. the fact is if youre not feeling good, take it apart to make sure that o ring is in. this isnt the first time ive heard this.. they might of just used the old one. keep me posted.. and i will keep my fingers crossed. thanks for your kind comment..
@@Coverman66 hey Terry well i got a mirror and looked behind where the pick up tube and oil pump meet and there was a huge gap,and remember i have a after market pan and pick up tube that has two bolts,and still a huge gap,thankfully i looked behind it,because in front it looked perfectly sealed man.so people might want to do this,hell like i said mine has 2 bolts and still wasnt sealed.
what i did,i have a new oil pump,so i took a cut off wheel to my old pump and cut it down to where its just the part that bolts to the pick up tube,then i was able to get channel locks and squeeze it together like 20 times closing the gap pretty good,i thought about getting it red hot with a propane torch,but i didnt,now im going to get a gasket with gasket silicone and try that terry.i closed the gap pretty good surprisingly ,so hopefully it will work.probably not my luck but damn dude im so tired,and i just do not want to have to remove the trans to get the pan and tube out.so im going to try this first.i would advise everyone to look very close front and back for leaks,later man
i fixed it terry,haha i took my old oil pump and cut it with a cut off wheel down to where there was nothing but the small piece left that bolts to the pick up tube,then i bolted that back on the tube then the gap was on the back side but i was able to take a pair of channel locks and squeeze it together like 10 times or so then i bought a roll of gasket material and made a gasket,put black silicone and sealed it up with a red o ring let it set a few days and i was so nervous this morning i filled it back up with oil and turned the key and bam,oil pressure lmao i was so happy i could have teared up with joy that i didnt have to tear the whole thing up.take it easy dude see ya later alright.hope this helps others,always take a mirror and look at the back for a gap alright.later
Awesome fam keep it up what’s the link to buy shirts 👕 if you have any
thanks brotha Frisco, the new shirts are being designed now.. look out for them.. thanks brothja..
My 08 yukon has 216k it makes no ticking or knocking sounds but is puffing a lil smoke on start up idk if i should put money into this engine or just save up some cash and buy a reman!! Last year we drove it from Detroit to Orlando with no probs!!! What would you do T with a 216k engine???
i would roll with it until your ready to do a transplant..
Was it hard getting both bolts into the oil pick up?
the bottom bolt is the pain.. but it can be done..
coverman66 what did you jack the engine up on to get that extra couple of Inches?
Great idea 👍 I have a 2007 TBSS. Can you give link or part# for oil pump and oil tube connector bolt. Thanks. Keep those videos coming.
always brotha G-man.. the pump is a LS high volume pump you can get from summit racing. and the pickup clamp is from improved racing..
@@Coverman66 LS Engine Oil Pump Pickup Tube Brace / Clamp
Rating:
100% of100
3 Reviews Add Your Review
$24.00
In Stock
Estimated ship date: Today
Qty
Add to Cart
Billet aluminum brace
Ensures equal clamping force is exerted to both sides of the oil pickup tube flange
Uses the unused extra screw hole in the oil pump and is 100% bolt-on
Lifetime Warranty
Part # EGM-500
Yo T I'm having problems My LS3 starting if it jumps time can it be that the ignition Fining order can be out of place how do I fix that
i doubt it would be that, if the injector plugs are right i would look at the spark plug wires.
Hello you have a part number for the part you found in inprove racing
no problem brotha SH..
LS Engine Oil Pump Pickup Tube Brace / Clamp
Part # EGM-500
part # is EGM-500
Is this the same as a 5.3 06 Monte Carlo?
it would work on a 5.3 for sure..
thank
Hey Terry,
How you doin' ?
I have an LY6 and would like to upgrade the stock pump to a higher volume one.. Please help a buddy with the top Brand and part #?
Have a Good One!
Bader
oil pump go with the GM performance oil pump.. thats the one i always use.. hope this helps and keep me posted..
@@Coverman66 I currently have a stage 4 226/230 600 lift cam would you still recommend that oil pump?
i need help.. i have to change oil tube o ring.. 69 cutlass ls1 engine.302-2 holley..is there a way without removing whole engine
dropping the pan is the only way, on that olds i would raise the engine enough to drop the pan and change the o ring. remember is the pan gasket is new you should be able to reuse, if the rubber looks flat, then replace it..
ok. i just replaced o ring..still at idle oil pressure goes up and down? what is the problem?
Dope
much appreciated..
How long did it take you to do this entire job
Dillen brotha its hard to say, i was shooting the video.. i would guess it can be done 3 hours depending on the vehicle..
@@Coverman66 ok thank you
Reused oil pan gasket?
anytime i remove the oil pan i get a new gasket brotha Ty..
How did you install it on this one from there? The factory gaskets have rivets on the top that have to be drilled out to remove the gasket. Im just trying to figure out if i can get away with doing this on mine without dropping the pan because i have a lift kit on the truck that makes it a huge job to get the pan out.
I can't get my oil pan out haha I ended up tearing everything out now I need to separate the engine and trans and pull the motor
on the Trailblazer?
No dam zl1 but I missed two bolts hard to see in the center covered by main harness. Ugh!!!!
totally understandable..
How much would a job like this cost?
depending on the shop. it took some hours but i wasnt rushing to get it done. what problems are you having?
I have a question is it a 4x4 and what did you do for a oil pan gasket
my tbss was a all wheel drive. i replaced the gasket.. it was shot..
@@Coverman66 just got my trailblazer up and running
Look up( trailblazer ext 5.3 04 ) just upload the video
So don't need open new pump to install?
no, its 4 bolts and its out, the problem is getting to the pickup tube bolt..
@@Coverman66 just completed the job. Didnt fix so I'm guessing I have bigger issue. Have ticking and low oil psi. Like 10 to 15 idle and 15 to 20 driving but gets lower further I drive.
it might be the pick up O ring..
@@Coverman66 I changed that to
Nate smith it also could be the wrong o ring, that has a lot to do with it! I read to see if it’s the o-ring is to over full it with 2 more qts and jack the back of the car up, see if the psi goes up. Not 100% sure though
Son, where would I find torque specs for oil pump, cam pulley and timing cover
whats good. i have a video with all that info.. i will look for it
What year engines does this work in?
all LS engines are pretty much the same.
Turn your back group music down a bit
noted.. thanks brotha Will
WHERE ARE U LOCATED? WHAT STATE?
near Ct..
I thought it was better to use a high pressure than to use a high volume. What do you think?
it all depends on what your doing with the vehicle.. you cant go wrong anyway you choose.
How much of a pain would it of been just to remove the oil pan??
a big one.. engine would have to come out or high enough to remove it..
@@Coverman66 dammm really?? Even in the rwd version??
yea because of the front sump..
@@Coverman66 dammm good to know.
@@Coverman66 its been a few months since seeing this video lol but I rewatched it!! Why cant we just remove the pil pan to get to the oil pick up bolt?? Cuz the subframe gets in the way??
How do you prime it
the oil pump... you could unhook the fuel line and turn the engine over a few time..
How much slack on the chain is good ?
a lil.. not enough to remove the chain, but not tight..
What do u think about the btr stage 4 cam in a tbss
depending what you are doing with the vehicle.. stage 4 is a great cam.
More of a summer truck I live in Chicago so I don't take it out in the winter it's pretty much stock besides a built trans with a stall k&n air intake and magna flow exhaust plan on getting some kooks headers soon or what do u recommend
the 4 is a great cam, i would call BTR and find out where your power will come in to make sure you will be happy with it..
I post ta b getting info on auto, but wow look at muhammad ali wow.
lolol its a comment i get all the time.. thanks Nardo..
Bro. No disrespect but you really favor Mohammed Ali
lolol thats a compliment.. thanks brotha DB..
Terry , Terry put up that cash app name so you can take cash for your tips👍
much appreciated.. thanks for the tip..
What about a Toyota Corolla?
?????
coverman66 is it done the same way ?
weld the tube into permanent place 🙄
hmmmmmm. seems like too much work to weld.. then its become permanent..
@@Coverman66 it's becomes permanently not a problem lol