How to Make DIY Music Reactive LED Strip VU Meter
Вставка
- Опубліковано 6 вер 2024
- Hello Guys today in this video I will show How to make DIY Music Reactive LED Strip VU Meter with WS2812B LEDs.
Subscribe It's Free ❤️ bit.ly/Creative...
Visit my Website for Buying Links & more Information about Music Reactive LED Strip: circuitbest.co...
Instructables: bit.ly/ccinstru...
Needed Components Online Link About DIY Music Reactive LED Strip VU Meter:
Amazon US:
SP107E Music Reactive LED Strip Controller: amzn.to/3bBOfw0
WS2812B LED Strip: amzn.to/3sguYX7
Amazon India:
SP107E Music Reactive LED Strip Controller: amzn.to/38D9kV0
WS2812B LED Strip: amzn.to/39rp5gZ
Banggood:
SP107E Music Reactive LED Strip Controller: bit.ly/2xUYQ3M
WS2812B LED Strip: bit.ly/3bnHEBD
**Note: Use Heat shrink tube for making all connections Secure.
Follow Me On Social Sites
Facebook: / creativeideas365
Instagram: / creativeideas365
Twitter: / creativeidea365
Music:
Track: Sub Urban - Cradles [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Sub Urban - Cradles | ...
Free Download / Stream: ncs.io/CradlesYO
Track: Lost Sky - Fearless pt.II (feat. Chris Linton) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Lost Sky - Fearless pt...
Free Download / Stream: ncs.io/Fearless2YO
A Magical Journey Through Space by Leonell Cassio
/ leonellcassio
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/a-magic....
Music promoted by Audio Library • A Magical Journey Thro...
Song: Atch - Daydream
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • Atch - Daydream (Vlog ...
Track: Outer - KV [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Outer - KV | Free Back...
Free Download / Stream: alplus.io/outer
------------------------------------------------------
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
#LED
#Music
#Reactive - Наука та технологія
Hope you guys like Music Reactive LED Strip VU Meter
Visit: circuitbest.com/music-reactive-led-strip-vu-meter/
Nice
I would like to build , can you send me a list of all parts i need to create a larger one....Please and thank you( robertvbarrise@ grmail.com
I do but it's not clear why you didn't run the power through the SP107E. Does it change or drop the voltage?
Hey man just saw your project and its killer, easy and doable by anyone, I'm 40 years old u can judge me but I'm gaming freak and constantly upgrade my gaming rig. Now I wanted to replicate your project but X3 times I wanted the VU to be exactly the size of my desk, and I want the height 10 less more so u used 20 I wanted to use 30. My config would be like this Segment will be 45 & pixels/segmants will be 30. Thants 1350 leds or simply saying 4.5 WS2812B. Now I have 2 question 1st I don't wanna use power bank and instead wanna use charger that use home supply and convert it to 5v output, So what I use I have extra server power supply's 750 watts but there output are +12v 62.5A / +12Vsb 3.0A or can you suggest me any thing else or a mobile charger or RO power supply or laptop one. And my 2nd and the main question is about SP107E Bluetooth, can this handle 4.5 led packs or I have to use different one or multiple of these, if multiple of these how the wiring will be done.
I'm Soryy for so many queries but I'm really excited watching this that I'll start as soon as you reply, And I'm planning to Paste the less between 2 transparent Acylic sheets and seal it with holes to remove heat from led's. Can you help me by guiding me
and i wanna connect it with my PC my board has inbuild Bluetooth so I hope the software connect to the Bluetooth too as now you can almost run android apps on windows, I'm running a lot now days
3:31 For a super clean look drill 3 small holes next to the pad so wire can poke through from the back..
Why are you connecting red wire over the module? Is there not power output in the back?
What kind of power supply do i need? i got the 5 meter (300 LED) strips and SP107e.
Thanks!
This controller SP107 is not suitable for use in spectrum analyzers, if it is tested using frequency sound the lights turn on incorrectly. I think it's better to use it as a vu meter. But nice video...👍
if you set the sensitive lower, the frequency will match much better, I saw your video, they are so cool, well done!
is Data Out cables, plug to speaker or something?
Doesn't look like lights are reacting to music as they should
Your rite the lights don’t jump when the song hits it just looks random bouncing around. But nevertheless great work good job
Could you use led strip connectors instead of soldering?
perfeito para eu coloca em mini paredao
can we play this from laptop
I like the idea of building one of these things, But from what i see in the videos, the music is not accurate to the leds.. is there latency? I'm looking for something that is very accurate.. is the video and sound just not accurate in this video ? The VU meters etc i have built with out uC ( using LM series chips ) they are much more accurate... can you explain to me how it can be made more accurate please,, thanks..
There is a delay, not sure what you can do about it.
other reviews have shown with a frequency generator this controller is not reactive by frequency. It is just randomly lighting the strips. It will work for a VU meter but not a "spectrum display."
Just one question... LEDs are connected in parallel altogether yet you can control all LEDs individually,how?
you missed one important LED Pin These are ARGB LEDs this can change color through data signal. Here the middle pin is the data signal :)
Same doubt
The Chord App generates the serial data string based on #segments/pixels (the model). Then each pixel takes its part off (instruction on color and brightness) and sends the rest of the data string to the next pixel. True for any Pixel controller.
Nice LED Spectrum 😮
Hi sir, I am using ws2811 with sp107e. But pixel colour doesn't match with led chord. Matrix also not working properly. I had checked all connections and seg/pixel settings. Plz help
If you set ws.. in the controller then it can control any ws2811 or ws2812 leds.
But before powering make sure what powering voltage you are using...
Isn’t 5V 2.1A too low? According to your stats 15*20= 300 LED’s and if each LED is at 0.3W thats a total of 90W And since you are using 5V that means 90/5= 18A there is a big difference between 18A and 2.1A...
Agree, but that would be all lights on at the same time on full brightness and white. I didn't see it, but there is usually a setting for percent of brightness like 30%. That's how this works without smoke.
Thank you man :)
Hello I have also tried this project but in my project only 1st segment is working ?? Any solution please
What wire are you using to connect the led segments
Normal coper wire
Creative creator Thank you!
You can use 22 AWG but 18/20 AWG would be better. You can also use 4-pin LED Strip jumpers - no soldering required.
How can I connect it to pc? Please reply me
May i know the power adapter spec use sir?
Are u need aux cabel to connect all time ?
It has internal microphone
You xan use it with or without aux cable 🙂
Heyy that’s awesome. Is it possible for me to do 30 segments of 150 leds each ?
Sure, but you'll need to power inject every 2-3 strands. that means directly connect from one or more power supplies. Keep in mind that each LED drops the voltage until they don't work right, so measure it after 2,3,4 strands to see what it will pass to the next one. The data line should be okay
I am hooking it up the same way and it's not working like that one the data to the data the red to the red in the white of the white all the way around
Cool. Im going to try and make one of these following your directions. Need to buy a soldering gun. Should be interesting. So one controller and/or power supply can do up to 2000 led's? So I could go higher, or longer (wider)?
Use a 5v 60A good power supply and ws2812 LEDs. And you are good to go 😌
@@Creativecreator Thanx. Im a total noob. Looking at some 5v 60a power supplies. How do I connect them to an outlet plug? Is there a plug in for a cord Im not seeing?
Yes there will be a ac input plug and dc output from the power supply
@@Creativecreator Ok, cool. I just watched a video on it. Also, one more dumb question. The RGB wires you loop connecting the led strips and soldering. I only can find the 4 part wire rgbw. Do you just strip off the white cord, or is there strictly 3 line wire(RGB) without the white?
@@Chrisicola no bro that is a different kind of rgb led. You will need specifically ws2812 leds. Those has 3 pins middle pin is data and corner pins are gnd and +ve
And yeah you have to connect then chain wise.
Is this work on DIY boom box or it is only working on the help of mobile phones?
yes bro it will work
Out put cable connet to speaker right?
Yes
Is the music ran via AUX or listening via onboard MIC?
Both are possible 😊
Is it working with music? And music must be played on mobile which is connected with that box?
This has 2 options
You can connect your phone with the device with 3.5mm jack
Or
You can use the device's internal microphone to sync the audio.(i have not connected with 3.5mm jack i used the device's internal mic.)
Hope this helps.😉
Excelente perfec👏👏👏👏👏.
👍👍👍👍.
Saludos men desde chile🇨🇱
It didn't work with SP110E
I wonder if you could do an entire wall in a room, and then of course all the walls?
you can, just would have to run power every few meters of LED strip. It can do up to 2000 LEDs at a time off a single controller.
@@williamhustonrn6160 excellent.
So super nice work
Thank you 😌
in this video reactive by sound from the phone
how about SP107e reactive from PC..?
You can use the given 3.5mm jack buddy
if you use power from power bank can we use it from pc's usb..?
Creative! I'll try one.
Very nice
Total Expense ? If transfer money can u do it one for me ?
Led music controller = $14
RGB led strip = $ 8
Total = $22
nice
Very nice vedio... Lv it
Thank you ♥️
Nice 👍👍😊
Super kanał super filmiki
Awesome
Making cost
How it can be conected to a music system
By using 3.5mm jack or just place it near your speaker. Its internal mike work just fine.
Hamko AK chahiye
Bro, Please Make A VU Meter That Detects Audio With Mic(Without Smartphone) 🙏
Ok it is in my do list
@@Creativecreator Please Make a Video Soon As Possible Please.....
@@dope_arjun can you tell me what the main function you need?
Can you tell me in detail?
It will be easier for me 🙂
@@Creativecreator I Need An VU Meter With Strip L.E.D That Reacts with the Voice from Mic Without Smartphone.
@@Creativecreator Please Reply...
Hey creator, I connected all of the things correctly as this video but
it's not working noh, Can you help me
Check the data line
@@Creativecreator But, i short red and white wires in the led strip as shortly, then strip light up instantly and off💔....
Where's the problem i can't find it 😭
Can you contact me on my instra?
@@Creativecreator i connected piece of one strip (Data in side only). So to work, Do I have to finish it completely?
@@YaxaSRI no bro you have to set how much led you want to run. Suppose you are connecting 50 leds in a row so you will add 50 leds on the Android app (LED chord) that's it.
hi, the sp107e does not work as a musical spectrum analyzer for multiple frequencies! they sell musical spectrum analyzers with 7 bass to treble outputs to connect the led
Give me the link
you are amazing 👌
Thank you so much ❤️
@@Creativecreator পুরাতন ডিভিডি প্লেয়ারের জন্য কোন মিউজিক লাইট গুলো ভালো হবে?
@@nadimnadim2065 yes
@@Creativecreator খরচ কেমন হবে ভাই??
👍.
I was all in until I saw it was being controlled by a phone! I need one that can be controlled by a normal remote controller. As soon as Apple or Samsung has a hissy fit, you're out of business!
SP017e is totally useless when want to sync with music 😔😔😔
👏👏👏🥇🥇
Thanks 😊
ᴬʷᵉˢᵒᵐᵉ ᵇʳᵒ
draw or show your diagram
not mute intstructions
your vlogs is reject very incomplete
not satisfied...not in good
Awesome
Thank you so much ❤️
@@Creativecreator No problem dude! You make really good videos
Jl
Cd ddffddTT
..@@n amj