Excellent tutorial. I am trying to learn 2 things. Can the SP107e display Left and Right independently. What I am really hoping to find is the ability to make a basic Left/Right VU meter. Thanks again for a great video
How can I ensure that each strip light is running from bottom towards the top (like yours) and not incorrectly every other strip runs from top to bottom?
hello, Thanks for the video but i have a question. I want to create a set up of 10 strip of 2 metter per strip. DO you think its possible ? Do you think its the same result with the application ? Thank you !
I can't get any led strips besides the first one to light up. Im not a great solderer, but I must be doing something wrong. Very frustrated. Any help would be appreciated.
@@MREasyMaker Any way I can send you a photo. I know its kind of imposing, but I'm at my wits end trying to get this to work and flushing money down the drain that I cant really afford to be doing.
@@MREasyMaker Thanks for you're advice. Got the project completed as far as led lights. Ran 32 rows at 20 high and it looks bad a--.I was initially a moron and just laid everything down and soldered it without a power supply as it was still in delivery. So my solder job was atrocious and that was the issue. I laid way too much solder and was bad with wire placement. Didn't realize everything had to be spot on. I haven't soldered since middle school. Anyway, I went from strip to strip checking with power after each. After major clean up of the old solder and re-connecting I finally got it done. Thanks again for being cool.
Greetings! Please can I do this on a 20ft wide and 6 ft high, also how many strip can the controller carry and is there any controller that can carry more strips? Thanks and hope to get a swift response
I connect positive & negative in front of the controller because it has input. And the strip need positive, Data and gnd but so that i connect data and gnd from output and positive wire from the input side.
Now why didn't you show you hooking up that last wire on the bottom but yet it was hooked up at the end not the power supply and data all the way at the other end
This looks nice and all, but some serious steps are missing to get this to work. For example: What power supply are you using? What Amps and what Voltage specifically? The Chord LED app does NOT support WS2812B LEDs (WS2812B option doesn't exist and the WS2811 option does not control the WS2812B, I tried) so how are you controlling these WS2812B LEDs with this app? a few things here don't add up.
Dc 5 to 24v amp not more than 6 it control all types of led ( that listed on the app) including 2812b, for other led, wiring diagram will be different.
Hello ! Please confess that the leds were not ordered with this controller, SP107E, maybe something ARDUINO...!? Or probably some setting, which I didn't find, but I turned it all the way, from the settings...!? With us, the LEDs pulse almost all the same...! Not even close, Analyzer Spectrum... and controller crap...!!? If you know something, please let us know, so that we don't struggle in vain, and spend our money unnecessarily, because there isn't much of it...!? Thank you in advance...! Respect!
Here I haven't used any Arduino, and I don't know what circuit inside the sp107e controller. just I learn from UA-cam and made it and its working perfectly.
Hello ! Please confess that the leds were not ordered with this controller, SP107E, maybe something ARDUINO...!? With us, the LEDs pulse almost all the same...! Not even close, Analyzer Spectrum... and controller crap...!!? If you know something, please let us know, so that we don't struggle in vain, and spend our money unnecessarily, because there isn't much of it...!? Thank you in advance...! Respect!
Hello ! Please confess that the leds were not ordered with this controller, SP107E, maybe something ARDUINO...!? With us, the LEDs pulse almost all the same...! Not even close, Analyzer Spectrum... and controller crap...!!? If you know something, please let us know, so that we don't struggle in vain, and spend our money unnecessarily, because there isn't much of it...!? Thank you in advance...! Respect!
Excellent tutorial. I am trying to learn 2 things. Can the SP107e display Left and Right independently. What I am really hoping to find is the ability to make a basic Left/Right VU meter. Thanks again for a great video
Very very good
Thank you
So it takes an audio line in? Or does it have a built in microphone? Great project, thank you for sharing.
It has an inbuilt microphone.
It has an aux input also.
Is it actual music spectrum?? Like for bass only leftside bars should go high have u teseted for frequencywise output?!
Have not checked yet
It's not. I just watched a video demonstration called "Tutorial Bluetooth Spectrum Analyzer VS VU meter Using SP107E Music Controller"
Nice color... thanks
🌹🌹🌹🌹❤❤❤❤
very good.thank you
🙏🙏🙏
How can I ensure that each strip light is running from bottom towards the top (like yours) and not incorrectly every other strip runs from top to bottom?
I can make it with any number of strips and leds per strip? like 14x10?
it supports maximum 64 stripes and maximum leds in each strip is 150.
Gracias por tu video, lo he instalado con la versión Ws2811 y no va funciona como el tuyo.
sorry for that
hello,
Thanks for the video but i have a question.
I want to create a set up of 10 strip of 2 metter per strip.
DO you think its possible ? Do you think its the same result with the application ?
Thank you !
Not possible. Controller has a limit to control pixels.
@@MREasyMaker do you know the limit ?
@@thomasperot8691 960 pixels
Hi, is it possible to synchronize 2 SP107e controllers simultaneously with the app?
No
I can't get any led strips besides the first one to light up. Im not a great solderer, but I must be doing something wrong. Very frustrated. Any help would be appreciated.
Yes somthing going wrong.
make sure that second strip must be connected from top, third strip connected from bottom like snake pattern.
@@MREasyMaker Any way I can send you a photo. I know its kind of imposing, but I'm at my wits end trying to get this to work and flushing money down the drain that I cant really afford to be doing.
@@Chrisicola mreasymaker@gmail.com
@@MREasyMaker Thanks. Ill hit you up. Appreciate it.
@@MREasyMaker Thanks for you're advice. Got the project completed as far as led lights. Ran 32 rows at 20 high and it looks bad a--.I was initially a moron and just laid everything down and soldered it without a power supply as it was still in delivery. So my solder job was atrocious and that was the issue. I laid way too much solder and was bad with wire placement. Didn't realize everything had to be spot on. I haven't soldered since middle school. Anyway, I went from strip to strip checking with power after each. After major clean up of the old solder and re-connecting I finally got it done. Thanks again for being cool.
Usb socket nya beli dimana bang?
Hi! Will it work on SP 105E controller?
Whats about the power supply to run 300 leds?
5v to 24v
What spec power supply are you using. Im facing problems only 2 row working
5v
Greetings! Please can I do this on a 20ft wide and 6 ft high, also how many strip can the controller carry and is there any controller that can carry more strips? Thanks and hope to get a swift response
maximum it can carry 64 strips and 150 leds in each strip
Hello, can I control music (Spotify) and the LEDs (SP107e Controller) at the same time via Bluetooth?
did not tried yet. but if you able to play music in background then it will work.
@@MREasyMaker Thanks, i think so too
Aonde que compra essa fita
amazon
and why do you connect the plus in front of the controller and not from it?
I connect positive & negative in front of the controller because it has input. And the strip need positive, Data and gnd but so that i connect data and gnd from output and positive wire from the input side.
Controller aur pixel ko same voltage to jayega lekin same amp nahi jayega
The LED strip is not in stock in Amazon, which LED strip will be equivalent to the same
Wait for stock bro. Or find ws2812b
Can I get one to buy 6 feet height 6 strips..
Sorry, I do not sell it.
I guess it wouldnt be too hard to scale up to 200x300 and display an old pc and run movies on it
Now why didn't you show you hooking up that last wire on the bottom but yet it was hooked up at the end not the power supply and data all the way at the other end
Where can we buy that SP107E led music controler
I purchased from bangood.
Aliexpress has these too
Bro, Can you please say the total cost
Approx 3k/4k
This looks nice and all, but some serious steps are missing to get this to work. For example:
What power supply are you using? What Amps and what Voltage specifically?
The Chord LED app does NOT support WS2812B LEDs (WS2812B option doesn't exist and the WS2811 option does not control the WS2812B, I tried) so how are you controlling these WS2812B LEDs with this app?
a few things here don't add up.
Dc 5 to 24v
amp not more than 6
it control all types of led ( that listed on the app) including 2812b, for other led, wiring diagram will be different.
Same here, no 2812b.. sux
yes. But try it, I am sure it will work.
@@MREasyMaker try what? as soon as i plug in the led strip it lights up sone od the leds. no control at all. greets
@@RCRonay sorry for that. Do all setup correctly
CAN YOU DO IT FOR ME??
Qual é o nome dessa fita de led
ws2812b
dimana bisa beli info ya cod
Looking for aurduino version of the same 🤔🤔🙄
I will pay , can u do it and send it to me in Indian address, what will be the cost
Sorry dear. I cant do, it will be too costly
Wow, what editor you used sir
Hello ! Please confess that the leds were not ordered with this controller, SP107E, maybe something ARDUINO...!? Or probably some setting, which I didn't find, but I turned it all the way, from the settings...!? With us, the LEDs pulse almost all the same...! Not even close, Analyzer Spectrum... and controller crap...!!? If you know something, please let us know, so that we don't struggle in vain, and spend our money unnecessarily, because there isn't much of it...!? Thank you in advance...! Respect!
Here I haven't used any Arduino, and I don't know what circuit inside the sp107e controller. just I learn from UA-cam and made it and its working perfectly.
Hello ! Please confess that the leds were not ordered with this controller, SP107E, maybe something ARDUINO...!? With us, the LEDs pulse almost all the same...! Not even close, Analyzer Spectrum... and controller crap...!!? If you know something, please let us know, so that we don't struggle in vain, and spend our money unnecessarily, because there isn't much of it...!? Thank you in advance...! Respect!
Hello ! Please confess that the leds were not ordered with this controller, SP107E, maybe something ARDUINO...!? With us, the LEDs pulse almost all the same...! Not even close, Analyzer Spectrum... and controller crap...!!? If you know something, please let us know, so that we don't struggle in vain, and spend our money unnecessarily, because there isn't much of it...!? Thank you in advance...! Respect!