Projection Mapping Tutorial - Build An Interactive Projection Mapping Installation With MadMapper
Вставка
- Опубліковано 27 кві 2024
- Find the full instructions here: www.bareconductive.com/blogs/...
Find out more about Interactive Wall Kit here:
www.bareconductive.com/collec...
See the wall in action at 06:37!
Steps:
00:00 - Intro
00:39 - Preparing the assets
01:07 - Applying the stencils
01:38 - Drill the holes for the screws
02:13 - Attach the Electrode Pads
02:57 - Paint the sensors with Electric Paint
03:35 - Attach the Touch Board and Electrode Shield
03:49 - Connect Electrode Pads to the Touch Board
04:43 - Upload the MIDI Interface code
05:07 - Import the animation into MadMapper
05:29 - Add MIDI commands
06:21 - Seal Electric Paint
06:37 - The results!
In the video:
Interactive Wall Kit - bit.ly/2SlKFwj
Arduino IDE - bit.ly/2vuuIKV
MadMapper - bit.ly/2SCmbh7
www.bareconductive.com
Instagram: / bareconductive
Facebook: / bareconductive
Twitter: / bareconductive
Github: github.com/BareConductive - Наука та технологія
Really nice work! There are so much opportunities to use this!
It is really nice, how many and what type of projector was used for this project.
What type of projector do you recommend with this size of project?
Hi Guy, i have a big problem with my touch board i follow different tuto but i dont arrive to put the good program with arduino ide. Do you know where i can find tuto with good process ???
Thank you so much
Have you solved the problem?
how do you set it up so projector can be turned off and on when daytime in gallery, but the video auto starts (doesn't need a person to start the videos everytime)?