@@rodzeroher Can you please give instructions? I have a GF65 gaming laptop and I can't seem to get the software to work. It's not able to detect sensors. Please help
I don't know if the reason is whether UEFI is open or not. Omen Command Center, for instance, fully operates on clocks, voltages and fan speeds (with curve editing). The firmware settings contain bits of information which allow control to be exerted outside BIOS. Third Party software does not have any bit or register map so it cannot control several things (except for Throttlestop - which depends on the access to specific registers). I honestly don't understand how OEMs don't allow for access to fan curves, voltages, clocks...freely. You can put in place several safeguards against nonsensical or dangerous settings and still allow some leeway for changes. Case in point: - fan curves editing - make sure a default curve is in place, one that kicks in when users want settings too low (the silence crave) - PROCHOT values (do not allow prochot values higher than a certain value; but allow users to set lower values) - turbo power limits (give leeway to take advantage of the potential of cpus, make sure defaults kick in if the cooling system isn't able to consistently deal with heat build-up) Laziness and low costs drive OEMs, though.
I donated for this - and I NEVER donate. An absolutely magnificent piece of software - if you want case fans to respond to GPU temperature, this is pretty much your only option. And the MIX curves are an extremely clever idea... I can see BIOSes implementing something like this very soon.
Bless the modder = Rem0o This has saved me the hassle of looking for a 5 pin to 4 pin cable. I had the Motherboard control my Noctuas on my GPU via CPU TEMPS, what a absolute annoyence, NOW i use this software to LINK gpu temps to particular fans. Much more BETTER.
Thank God dude! My front middle fan has been going up and down 200rpm-600rpm and making terrible noises. Custom set the fan speed to like 70% (900RPM) and it sounded better, then I just added a GPU graph that looks like yours and set it, NOW it is quiet as a mouse! Idk how but it fixed it, still running at lower speeds but it's somehow quiet.
Ya this was crazy, had a fan on my front display that was just making awful noises, RPM stuck at low speeds, I custom set it higher to like 70%+ and it was still making a sound but was better. Then I made a custom graph based on the GPU and set the weak fan to GPU and BAM QUIET as a mouse.
Great Review on much needed fan control. I will donate for the first time. Have and old Motherboard ASUS P8H67-M LX (LGA1155) (2011) I5 2.5 ghz with only a CPU fan header and a System fan header. Paired with a AMD Radeon R9 200 Series and great for gaming but I bought it used and am transferring to a new case a Be quiet! Pure Base 500DX that came with 3 140mm fans (3pins DC). I can install all 3 with an ARCTIC 4-Pin PWM Fan Splitter Cable - PST Extension-Cable for 4 Case Fans ( $9 bucks) and use this software to control my detected system fan header! Works on Win 10. Thanks much to you and the software designer!
@@nigelphillips7454 this software will NOT affect your bios. It will override the fan settings assuming the BIOS let's it. You can reset the fan settings to default buy deleting the folder/software.
This is the only program that detects my front case fans and lets me bring them down from TURBO to literally anything else lol. Never buying another cooler master case again.
Decent, although it seems to have detection issues on my system. The very basic fan control on my ASrock b365m is able to throttle the fans down much lower.
Interesting... Because it should be the same, the application just takes over BIOS control. Unless there's a setting in the BIOS limiting it I don't know what's going on.
@@HardwareForGamers I have the same issue. I have 3 fans not inlcuding my GPU and it only detects one of them. They are all the exact same fans from the same manufacturer, and it won't detect the others. I am glad this works for others, but it looks like a no-go for me.
guys am i the only one experiencing -1 rpm on my gpu speed card? the rpm definitely does change when i set it to manual control. but when i stop setting it to manual control and pair it with any other curves its just stuck at 40% with the question mark symbol. no other fan controlling apps installed except FanControl btw
This app works for a while, and then mess up the fan control of the fans hooked up. Now the fans all boot/reboot will be running at max speed, ignoring bios fan curve. In windows can be controlled by rem0o but when turn off follow custom fan curve it will go at max speed again. Shutdown and boot will do the trick for one time only, when u reboot same thing happens again. I cannot find a way out. It seems to be long lingering issue. Its raised in the rem0o troubleshooting and never answered. New users beware
Have the O11D Evo, a total of 10 fans. 3 on the bottom and 3 on the side as intake, 3 on the AIO and a rear as exhaust. All the fans are Phanteks T30. How would you recommend setting up the fans in this software?
weird how it cant detect the fans in my tower when speedfan can see the 6 fans but can't touch fan 6 for some reason. although it can see the fans on my 3060
there are 3 fans on my aio, 1 rear exhaust fan and 3 intake fans on the front (nzxt h7 elite). i located the aio fans and the rear exhaust fan. fan #2 and fan #6 don't seem to control anything, certainly not the 3 front fans. fan #2 is between 817-822 rpm and fan #6 is over 3000 rpm. any idea what those 2 could be?
I can confirm that this is working on my Dell G7 7588! I've been looking for such program, because the only problem of the Dell G7 7588 is its fan not ramping up to anticipate the temp change, now that it does what i want it to do, i can basically throw anything at this laptop and the program keeps it at 70 C.
with the changes being made at the 9 minute mark, is he turning down the intensity of the fans as the system heats up? wouldnt you want to do the opposite while gaming?
I would like to ask if someone with a FE 3000 rtx series was able to make FanControl make gpu fans to stop spinning under a certain temperature. For example, if I set my gpu graph to 0 rpm until 40°C, the fans ignore my settings and continue spinning at 1000 rpm. If I close FanControl, fans stop at idle. Thanks
The basic idea most people follow is try to keep the fans as quiet as possible (system being ideal or watching videos) until you can't (playing a game or rendering something).
@nigelphillips7454 I don't understand what you're talking about how many software? Download fan control from GitHub and see if it works (if you're using a laptop it likely wont)... If it does work you'll be able to setup fan curves or set the fans to any speed you want.
@@HardwareForGamers sorry for being unclear so there is no particular setting that works better for cpu fan speed and if deleted will i still have my warranty
i need this good app for the xfx speedster zero rx 6900 xt because no one can tell me this card has a pwm connection. so i can controll the fans from the radiator on the gpu temp. good job Rem0o!
I have found an Issue, it: A: Will not Work on a Classic Bios B.1: Does not Work on Windows Server 2012 R2 B.2: Does not Work on Windows Server 2008 R2 B.3: Does not Work on Windows Server Std in Generall I know i should have Migrated Already, we are on it. My Servers are getting Loud, that is the Problem.
IT's a nice software, but have to hook all fans to Motherboard headers to work. Some guy did a plugin for the Corsair Commander Pro, but couldn't get that to work.
Have you clicked the first toggle or switch to give FanControl control of the fan, then you should be able to do the pull-down menu and select manual control.
@@HardwareForGamers yea i did, im lowering the speed and its not responding, I woke up to some issue with my fans, they started going fast af and I cant control them
Thanks for the video! but i'm still left kinda unsure about what to set my fans to % wise and when to change them. should i manually change them before playing Apex or? cuz i'm guessing i should have different settings for browsing and gaming/animation work.
You shouldn't really need different settings, that's the point of the graphs. You can have the fans spin up as things get warmer. As to what percentage to have them at. Idle and browsing you want them as low as you can get them without thermally throttling. Again when gaming, you want to have the fans cooling well enough that nothing is thermally throttles. It's something you just need to play with.
I can control my fans perfectly fine with SpeedFan, but I would like to move to Fan Control. I can control my GPU fans but not case fans. I know that I can control these fans bc software called SpeedFan works. with this. The software detects my fans (in the "Speeds" tab), but they do not show up in the "Controls" tab. Can sb help?
@@HardwareForGamers thanks so much so you mean i can delete it by control panel and its folder in program files also which settings would work for lowering tempatures and if possible increasing cpu fan speed and last thing do i download 1 or 2 things
Thanks for the tutorial. Now I can controll 3 of my 6 fans. But can you help me controll the other 3? I can see in the program that they exist and are functional but I can't controll them. They're pretty loud aswell. You mentioned something about GPU fans. I'm not so good with computers so didnt understand the big difference. Are these kind of fans uncontrollable? One of them is going 1500 RPM.
I currently have 6 case fans which I control via BIOS as they are DC (3 pins) and not PWM (4 pins). So, can I use this software to control DC fans or is it just for PWM? Thanks in advance.
This software needs an open UEFI to work properly. it's also possible you may need to activate or deactivate (depending on motherboard) "smart fan" in the UEFI. you may want to check this vid out ua-cam.com/video/6PkB2XqcOz8/v-deo.html
how to automatically launch this program with the windows???? i have to launch it manually every time, it dosen't appear in task manager startup and shell:startup shortcut didn't work either
in the hamburger menu on the top left should have check boxes "Start with Windows". I've also notices the program works better when the folder is on the desktop. Hope that helps.
Hello i am french and i am writing this message because i am completely lost I search on several forums but no one has the solution When I open the the application I have several errors that appear and only the application is completely unusable because it does not know at what speed my fans are running “These errors occurred during config restore: Missing speed sensor: /gpu-amd/0/fan/0 - GPU fan Missing speed sensor: /lpc/it8665e/fan/3 - Fan #4 GPU fan missing control: /gpu-amd/0/control/0 - GPU fan Missing sensor control: /lpc/it8665e/control/4 - Fan control #5 if this error occurs on boot, try increasing your timeout startup” I tried to increase the time but it does not change anything, please help me
I have to keep reinstalling. It initially works then after a couple days FanControl will start but won't control fans. I have to isolate userconfig file, reinstall fan control, drop in userconfig, then it will work again. Any advice? Processor: 5600x Motherboard: MSI B550 Gaming Edge Wifi GPU: AMD 6700xt Cooler: Kraken x53
Hello sir! I have a question. Does this program overwrite the bios? I used this program works fine for hours but after restart my computer pc isnt able to post (no bios no display and no beep sound). I tried to start without ssd and hdd but nothing happened. Only fans are spinning.
There is a start on windows option, but I've found depending on where you have the folder it doesn't always work. The app seems to work best when the folder is on the desktop.
I just upgraded to an i9 on a Z690 board. On this system I cannot assign curves to my fans, except for the GPU fans. On my old i7 on a Z380 board, I could. Any work abound to that that you are aware of?
I'm trying this on a Laptop. "Controls" and "Speed" sections are empty even after auto-discovery. Funny enough if I create a curve I can select the sensors, and they are properly named. IS this normal behavior on laptops, and can we overcome this? Can I manually add the fans in order to control then?
where do you have the folder?... because I had a similar issue with the folder in my program files. I moved the folder to my desktop and the issue went away...
@@HardwareForGamers i have it in the documents folder, i also used to have it on my desktop but the problem was still there. Eventually I found out about a plugin that let you "force" the autostart of the program and now it works
i have a mobo from gigabyte GA-P67A-UD4-B3 and i5 2500. I did disabled the smart fan mode on bios yet its only detecting my rx580... any ideas why otehr fans not getting detected?
well i had high hopes for this program, unfortunately during the initialization where its gathering the sensors and testing rpms it shuts off my rad fans causing my cpu temp to skyrocket and shut down. anyone know any way around this?
One thing I noticed is that I have a 3080 ti that has 3x fans. It is only showing 2 slide controls for gpu. Does that mean it is only using 2 fans controlled in program or is it defaulting the 3rd one?
My best guess is that 2 of the fans are plugged into the same PWM header on the video card with the 3rd plugged into its own PWM header. You can figure it out pretty early by playing with the sliders.
so... you have to set the amd gpu fan settings to manual in amd software, to then allow you to create a GPU curve in fan control, before you can assign a case fan to respond to the gpu fan curve you set up?
I'm not sure how it is now, but when I made the the video there was no way for fancontrol to control an AMD 5000 or 6,000 GPU. You should just be able to assign a GPU temperature to a fan header.
@@HardwareForGamers thank you, that worked! Feels good to be able to make lower front fan spin faster in relation to the GPU. I was wondering though, I noticed that a lot of hot air from the GPU is actually kicked out at the front end (inside the case), is it wise then to have a front fan blowing directly against this?
@@HardwareForGamers ok sure, thats lucky because the 2x140mm front fans i run have a gap between them, so the fan is not blowing directly back into the face of the gpu
Heya, great video. Question. What can I do if my fan isn't fully recognized? I can turn them on and off, set it from 0% to 100%. But I dont see the RPM nor can I pair it with a Fan Curve.
@@HardwareForGamers Oh thanks for the fast reply. No its a brand new PC. Its uses this case "Chieftec Hunter GS-01b" the fans came with it. Its uses a 4 pin PWN connector, and I left everything on "Auto" in the Bios. While your here, on restart something keeps deleting the "FanControl.exe". Its not the Antivirus, its doesn't have anything in its history about it. Great app btw.
@@Ragmon1 you may want to email Rem0o (the guy who made the UI) about the exe file going missing or being deleted. Now about the fans not being controlled, are you using the hub that the case comes with, or you plugging the fans directly into the motherboard? Plus what operating system are you using. I've had some other people comment that it's not 100% on Windows 11.
@@HardwareForGamers I will try to contact them. Yea its using a hub... oh now it makes sense. Its getting conflicting information cause the hub has multiple fans connected to it. And its connecting to the motherboard via 1 4 pin connector. Windows 10 64bit.
Oh my god this is amazing my graphics card temperature is running at 76 since I optimized it on my 2080 super now with my fan speed up just a little bit I’m at 52°C while playing Apex 🤌😎
This software doesn't seem to work on laptops, I think it needs an open UEFI to work properly.
Yep, i actually had the BIOS controlling fans with a MSI mobo and i had to turn off its "smart control" in order for this to take over
@@rodzeroher thanks for letting us know.
@@rodzeroher Can you please give instructions? I have a GF65 gaming laptop and I can't seem to get the software to work. It's not able to detect sensors. Please help
I don't know if the reason is whether UEFI is open or not.
Omen Command Center, for instance, fully operates on clocks, voltages and fan speeds (with curve editing). The firmware settings contain bits of information which allow control to be exerted outside BIOS. Third Party software does not have any bit or register map so it cannot control several things (except for Throttlestop - which depends on the access to specific registers).
I honestly don't understand how OEMs don't allow for access to fan curves, voltages, clocks...freely. You can put in place several safeguards against nonsensical or dangerous settings and still allow some leeway for changes.
Case in point:
- fan curves editing - make sure a default curve is in place, one that kicks in when users want settings too low (the silence crave)
- PROCHOT values (do not allow prochot values higher than a certain value; but allow users to set lower values)
- turbo power limits (give leeway to take advantage of the potential of cpus, make sure defaults kick in if the cooling system isn't able to consistently deal with heat build-up)
Laziness and low costs drive OEMs, though.
@@rodzeroher Wait you got it to work on a laptop? hold on
Sup, glad you enjoyed the software!
Thanks for making it.
any idea why it is not seeing 2 of my fans ( be quiet silent wing 3) on fan slot 4 & 5
Is there any chance you can make it compatible with Lenovo legion 5 15ach6h ?
Does this software work for laptop?
@@zero-by6ib no i just tried
Even cooler is the Mix sensor now you can just set a CPU and GPU mix and then your case fans will ramp up to whichever is higher CPU or GPU.
I donated for this - and I NEVER donate.
An absolutely magnificent piece of software - if you want case fans to respond to GPU temperature, this is pretty much your only option. And the MIX curves are an extremely clever idea... I can see BIOSes implementing something like this very soon.
Same!
only when gpu and mobo are from the same brand, and it will probably be ASUS to implement this.
Bless the modder = Rem0o
This has saved me the hassle of looking for a 5 pin to 4 pin cable. I had the Motherboard control my Noctuas on my GPU via CPU TEMPS, what a absolute annoyence, NOW i use this software to LINK gpu temps to particular fans. Much more BETTER.
Cool, nice to hear things worked for you.
Thank God dude!
My front middle fan has been going up and down 200rpm-600rpm and making terrible noises.
Custom set the fan speed to like 70% (900RPM) and it sounded better, then I just added a GPU graph that looks like yours and set it, NOW it is quiet as a mouse! Idk how but it fixed it, still running at lower speeds but it's somehow quiet.
Thank you so much. I can now link my case fans to my GPU temps.😀
Glad you found it helpful.
Good software and amazing tutorial, I understood everything perfectly.
Glad it helped!
thank you so much my fans are more quiet i hope they automatically go up while gaming as i will be testing. love your video thanks
If you have any questions just ask.
Ya this was crazy, had a fan on my front display that was just making awful noises, RPM stuck at low speeds, I custom set it higher to like 70%+ and it was still making a sound but was better.
Then I made a custom graph based on the GPU and set the weak fan to GPU and BAM QUIET as a mouse.
Great tutorial video! Fan Control is just amazing.
This is the greatest fan control software known to man.
Literally the best software! Got it installed on all my PCs
awesome recommendation! This works, I'll be sure to leave a donation to the team.
Great Review on much needed fan control. I will donate for the first time. Have and old Motherboard ASUS P8H67-M LX (LGA1155) (2011) I5 2.5 ghz with only a CPU fan header and a System fan header. Paired with a AMD Radeon R9 200 Series and great for gaming but I bought it used and am transferring to a new case a Be quiet! Pure Base 500DX that came with 3 140mm fans (3pins DC). I can install all 3 with an ARCTIC 4-Pin PWM Fan Splitter Cable - PST Extension-Cable for 4 Case Fans ( $9 bucks) and use this software to control my detected system fan header! Works on Win 10. Thanks much to you and the software designer!
Oh wow this video is brand new, this helped me a ton. I was using Icue and it’s frustrating.
Glad you found it helpful.
ique razor cooler master etc. just bloatware that slows down and affect the system not only on startup 😄
@@nigelphillips7454 this software will NOT affect your bios. It will override the fan settings assuming the BIOS let's it. You can reset the fan settings to default buy deleting the folder/software.
This is the only program that detects my front case fans and lets me bring them down from TURBO to literally anything else lol. Never buying another cooler master case again.
Great Job with the video. Thank you!
Glad you liked it.
Decent, although it seems to have detection issues on my system. The very basic fan control on my ASrock b365m is able to throttle the fans down much lower.
Interesting... Because it should be the same, the application just takes over BIOS control. Unless there's a setting in the BIOS limiting it I don't know what's going on.
@@HardwareForGamers I have the same issue. I have 3 fans not inlcuding my GPU and it only detects one of them. They are all the exact same fans from the same manufacturer, and it won't detect the others. I am glad this works for others, but it looks like a no-go for me.
HELP! I cant find a Plugin installation guide anywhere the Git is pretty confusing to me
Doesnt work on laptops.
Why isn’t my cpu fan being recognized
Thanks my dear brother 🙏
glad you found it helpful.
Great job
Thanks
Any chance you might do another presentation exploring/explaining the start/stop % adjustment settings (under rpm drop down), hysteresis etc...
Likely not, most of the default settings work just fine so there's no need to do anything.
Will this work with MSI Afterburner in the background. Want to use MSI for overclocking GPU and this software to run fans etc.
It should
guys am i the only one experiencing -1 rpm on my gpu speed card? the rpm definitely does change when i set it to manual control. but when i stop setting it to manual control and pair it with any other curves its just stuck at 40% with the question mark symbol. no other fan controlling apps installed except FanControl btw
This app works for a while, and then mess up the fan control of the fans hooked up. Now the fans all boot/reboot will be running at max speed, ignoring bios fan curve. In windows can be controlled by rem0o but when turn off follow custom fan curve it will go at max speed again. Shutdown and boot will do the trick for one time only, when u reboot same thing happens again.
I cannot find a way out. It seems to be long lingering issue. Its raised in the rem0o troubleshooting and never answered.
New users beware
Have the O11D Evo, a total of 10 fans. 3 on the bottom and 3 on the side as intake, 3 on the AIO and a rear as exhaust. All the fans are Phanteks T30. How would you recommend setting up the fans in this software?
weird how it cant detect the fans in my tower when speedfan can see the 6 fans but can't touch fan 6 for some reason. although it can see the fans on my 3060
You may need to turn "smart fan" (or what ever it's called for your motherboard) on in the UEFI, FanControl can be weird that way.
What does it mean if you pair the GPU fans automatically and they sit at zero when not playing games?
there are 3 fans on my aio, 1 rear exhaust fan and 3 intake fans on the front (nzxt h7 elite). i located the aio fans and the rear exhaust fan. fan #2 and fan #6 don't seem to control anything, certainly not the 3 front fans. fan #2 is between 817-822 rpm and fan #6 is over 3000 rpm. any idea what those 2 could be?
Fan #6 at 3000 RP Most likely would be the aio pump... Are you sure Fan #2 isn't the front fans because what else is plugged in to the motherboard?
I can confirm that this is working on my Dell G7 7588! I've been looking for such program, because the only problem of the Dell G7 7588 is its fan not ramping up to anticipate the temp change, now that it does what i want it to do, i can basically throw anything at this laptop and the program keeps it at 70 C.
I didn't know my tuff mother board register cpu fan and opt cpu as one.
Other Than that i really like it
So useful
with the changes being made at the 9 minute mark, is he turning down the intensity of the fans as the system heats up? wouldnt you want to do the opposite while gaming?
My XFX 6800 is showing up as a sensor but isn't giving up control of the fans themselves.
LOL nothing shows up for me after the assisted setup what gives
I would like to ask if someone with a FE 3000 rtx series was able to make FanControl make gpu fans to stop spinning under a certain temperature. For example, if I set my gpu graph to 0 rpm until 40°C, the fans ignore my settings and continue spinning at 1000 rpm. If I close FanControl, fans stop at idle. Thanks
That is pretty weird, but I don't know, sorry. Hopefully someone else can answer it.
@@HardwareForGamers Thanks for the answer. Let's hope and see...
there’s been an update that allows it to drop to 0 RPM
@tehMaloWalo yes I know, from some time actually. Now the program for me is perfect 👌
I don't think this software can control 3-pin case fans. My 2 case fans are 3-pin and on pwm mode and i cant adjust the speed.
Thanks so much
Glad I could help.
Your the best Happy Holidays
Happy holidays to you too
I'm new at fan curves, any quick tip for starters? amazing video subbed yes.
The basic idea most people follow is try to keep the fans as quiet as possible (system being ideal or watching videos) until you can't (playing a game or rendering something).
@nigelphillips7454 I don't understand what you're talking about how many software? Download fan control from GitHub and see if it works (if you're using a laptop it likely wont)... If it does work you'll be able to setup fan curves or set the fans to any speed you want.
@@HardwareForGamers sorry for being unclear so there is no particular setting that works better for cpu fan speed and if deleted will i still have my warranty
@@nigelphillips7454 I don't know what warranty you're talking about, but it should not.
@@HardwareForGamers i mean my laptop warranty i got it under a year ago also i heard that if laptop is to cool its bad or is this software safe
i really dont understand why mine looks different acts different and bugs out everytime i close it out
I can’t get it to run, is it because I have L-Connect ? It won’t discover any fans
How do I know what fan is what cause they sound the ssme
Sorry, but the only way I know is to look and listen. If you have different types of fans with different RPM s you can look at the RPM readout.
i need this good app for the xfx speedster zero rx 6900 xt because no one can tell me this card has a pwm connection. so i can controll the fans from the radiator on the gpu temp. good job Rem0o!
None of the fans are on my screen. Its just blank whys that?
thanks! one question - why didnt you set the fan curve on the GPU fans to your GPU preset?
@@josepedroz.2334 because this software doesn't let you control the fans on AMD GPUs.
I have found an Issue, it:
A: Will not Work on a Classic Bios
B.1: Does not Work on Windows Server 2012 R2
B.2: Does not Work on Windows Server 2008 R2
B.3: Does not Work on Windows Server Std in Generall
I know i should have Migrated Already, we are on it. My Servers are getting Loud, that is the Problem.
hi. i am using a laptop and it cant find any fans. is there a way to fix this?
IT's a nice software, but have to hook all fans to Motherboard headers to work. Some guy did a plugin for the Corsair Commander Pro, but couldn't get that to work.
Mine can't find fan stop and fan start detection. how to fix?
am i the only one who cant click manually change, its just greyed out, and my pc is really new....
Have you clicked the first toggle or switch to give FanControl control of the fan, then you should be able to do the pull-down menu and select manual control.
@@HardwareForGamers yea i did, im lowering the speed and its not responding, I woke up to some issue with my fans, they started going fast af and I cant control them
Thanks for the video! but i'm still left kinda unsure about what to set my fans to % wise and when to change them. should i manually change them before playing Apex or? cuz i'm guessing i should have different settings for browsing and gaming/animation work.
You shouldn't really need different settings, that's the point of the graphs. You can have the fans spin up as things get warmer. As to what percentage to have them at. Idle and browsing you want them as low as you can get them without thermally throttling. Again when gaming, you want to have the fans cooling well enough that nothing is thermally throttles. It's something you just need to play with.
@@HardwareForGamers I see, Thank you! What program do you use for watching CPU and GPU Temps?
I use HWinfo64
@@BlueSaturnn you can also use MSI afterburner with RTSS to display a bunch of temps while gaming
I've been using this for months. It is the top of the line for fan control software. Is there any way to set the temperatures to report in Fahrenheit?
I'm not sure, but I would think that's more of a windows settings thing.
I can control my fans perfectly fine with SpeedFan, but I would like to move to Fan Control. I can control my GPU fans but not case fans.
I know that I can control these fans bc software called SpeedFan works. with this.
The software detects my fans (in the "Speeds" tab), but they do not show up in the "Controls" tab.
Can sb help?
Wish it could handle fans over controllers like Rog Fan commander.
Thanks for the video! Is it true that the program have to be running in the background for the curves to be appied?
Yes it needs to be running.
@@HardwareForGamers thank you
@@HardwareForGamers thanks so much so you mean i can delete it by control panel and its folder in program files also which settings would work for lowering tempatures and if possible increasing cpu fan speed and last thing do i download
1 or 2 things
Cpu is automatically labelled as such no need for that anymore. It's a shame though, you can't control the gpu fans speed but that kinda makes sense.
Thanks for the tutorial. Now I can controll 3 of my 6 fans.
But can you help me controll the other 3?
I can see in the program that they exist and are functional but I can't controll them.
They're pretty loud aswell.
You mentioned something about GPU fans. I'm not so good with computers so didnt understand the big difference.
Are these kind of fans uncontrollable?
One of them is going 1500 RPM.
What type of fan? How are they connected? What motherboard are you using?
thx
Glad you found it helpful.
@@HardwareForGamers it was perfect 💪 dropped temps from 100c in games to 80c without much noise from the fans 🥳
Is there fan control software or bios for gp elitebook g9 or g8
Help! why when i put my case fans less than 30% they stop to spin?
😂 ofc why would you put them down
Dosent work on my laptop
Gpu core temp doesnt show only gpu vr soc temp, heeeeeeeeeelp
it will only detect my graphics cards fan but nothing else, i cant find out why
What are your system specs ?
Can't uninstall this program, this is not on control panel or have any option for doing it.
Simply delete the folder.
Why would the "manual control" option be greyed out for my fans?
Have you taken control of the fan? The little slider on the left.
je to funkční a jenom mužu doporučit pro cz/sk
2 security vendors and no sandboxes flagged this file as malicious
Help me please. How to properly remove this program? What if I want it to stop affecting the operation of the system?
Delete the folder
I currently have 6 case fans which I control via BIOS as they are DC (3 pins) and not PWM (4 pins). So, can I use this software to control DC fans or is it just for PWM? Thanks in advance.
You can control both 3 pin and 4 pin fans with this software.
I really wish this controlled individual fans connected on a hub. :(
I would need help please it only finds my graphic carf fan ....
This software needs an open UEFI to work properly. it's also possible you may need to activate or deactivate (depending on motherboard) "smart fan" in the UEFI. you may want to check this vid out ua-cam.com/video/6PkB2XqcOz8/v-deo.html
how to automatically launch this program with the windows???? i have to launch it manually every time, it dosen't appear in task manager startup and shell:startup shortcut didn't work either
in the hamburger menu on the top left should have check boxes "Start with Windows". I've also notices the program works better when the folder is on the desktop.
Hope that helps.
@@HardwareForGamers nope, i didn't find the setting "start with windows"
Hello i am french and i am writing this message because i am completely lost
I search on several forums but no one has the solution
When I open the the application I have several errors that appear and only the application is completely unusable because it does not know at what speed my fans are running
“These errors occurred during config restore: Missing speed sensor: /gpu-amd/0/fan/0 - GPU fan Missing speed sensor: /lpc/it8665e/fan/3 - Fan #4 GPU fan missing control: /gpu-amd/0/control/0 - GPU fan Missing sensor control: /lpc/it8665e/control/4 - Fan control #5 if this error occurs on boot, try increasing your timeout startup”
I tried to increase the time but it does not change anything, please help me
What are your system specs?
It sayng my fans are not working and some are and my fans are not spinning how do i make it to spin
These fans that are not spinning, do they spin when you start up your computer? How are the fans plugged in ?
I have to keep reinstalling. It initially works then after a couple days FanControl will start but won't control fans. I have to isolate userconfig file, reinstall fan control, drop in userconfig, then it will work again. Any advice?
Processor: 5600x
Motherboard: MSI B550 Gaming Edge Wifi
GPU: AMD 6700xt
Cooler: Kraken x53
Do you have any anti virus or malware software?
@@HardwareForGamers Just Windows Defender. Windows 10 too.
@@MrOverlord559 where are you extracting it? Because I found if it's not on my desktop it doesn't seem to like to work properly...
@@HardwareForGamers To my desktop. lol That's where it lives.
Hello sir!
I have a question. Does this program overwrite the bios? I used this program works fine for hours but after restart my computer pc isnt able to post (no bios no display and no beep sound). I tried to start without ssd and hdd but nothing happened. Only fans are spinning.
No it does not overwrite anything... Does your motherboard have a LED debug? because it sounds like something died...🥲
Do i need to turn it on everytime i start the pc?
There is a start on windows option, but I've found depending on where you have the folder it doesn't always work. The app seems to work best when the folder is on the desktop.
There need be a tutorial on how install plug-in also it's not showing my fans on my tower and I using Alienware Aurora R7
Can you get into the UEFI (bios) and change the fan speed there? All this app does is piggyback off the MB.
I just upgraded to an i9 on a Z690 board. On this system I cannot assign curves to my fans, except for the GPU fans. On my old i7 on a Z380 board, I could. Any work abound to that that you are aware of?
You may need to turn on "smart" control in the UEFI.
I'm trying this on a Laptop. "Controls" and "Speed" sections are empty even after auto-discovery. Funny enough if I create a curve I can select the sensors, and they are properly named. IS this normal behavior on laptops, and can we overcome this?
Can I manually add the fans in order to control then?
as far as I know this software does not work with laptops. If it could be easily overcome, I think the devs would have done it by now... sorry.
Hello!
I don't have a fan curve option under the controls menu .
You state it at 8:58
Thank you!
When you click the green + on the right side to add a meter, don't choose linear, make sure you choose a fan curve module....
This software makes setting up fans a breeze!
Hi I got a problem with the program that doesn't open during the startup even if it's explicitly set to open how can I do?
where do you have the folder?... because I had a similar issue with the folder in my program files. I moved the folder to my desktop and the issue went away...
@@HardwareForGamers i have it in the documents folder, i also used to have it on my desktop but the problem was still there. Eventually I found out about a plugin that let you "force" the autostart of the program and now it works
i have a mobo from gigabyte GA-P67A-UD4-B3 and i5 2500. I did disabled the smart fan mode on bios yet its only detecting my rx580... any ideas why otehr fans not getting detected?
the software needs an open UEFI to control the fans, can you create a fan curve for the fans from your UEFI?
well i had high hopes for this program, unfortunately during the initialization where its gathering the sensors and testing rpms it shuts off my rad fans causing my cpu temp to skyrocket and shut down. anyone know any way around this?
Are you overclocking?
One of my fans isn’t calibrated is that okay?
@@tone_talks depends on which fan.
POV now your pc have a Trojan Virus
Why do you think that?
One thing I noticed is that I have a 3080 ti that has 3x fans. It is only showing 2 slide controls for gpu. Does that mean it is only using 2 fans controlled in program or is it defaulting the 3rd one?
My best guess is that 2 of the fans are plugged into the same PWM header on the video card with the 3rd plugged into its own PWM header. You can figure it out pretty early by playing with the sliders.
Is IT good for My PC to stop the fans while tuning
It shouldn't really matter, just as long as they start up again.
For some reason my antivirus activates on this, is it really safe to use?
As long as you're getting it from the github link it's safe.
so... you have to set the amd gpu fan settings to manual in amd software, to then allow you to create a GPU curve in fan control, before you can assign a case fan to respond to the gpu fan curve you set up?
I'm not sure how it is now, but when I made the the video there was no way for fancontrol to control an AMD 5000 or 6,000 GPU. You should just be able to assign a GPU temperature to a fan header.
@@HardwareForGamers thank you, that worked! Feels good to be able to make lower front fan spin faster in relation to the GPU. I was wondering though, I noticed that a lot of hot air from the GPU is actually kicked out at the front end (inside the case), is it wise then to have a front fan blowing directly against this?
@@Zombie101 it shouldn't matter too much, but it would be ideal to blow the air under the GPU not at it.
@@HardwareForGamers ok sure, thats lucky because the 2x140mm front fans i run have a gap between them, so the fan is not blowing directly back into the face of the gpu
Heya, great video. Question.
What can I do if my fan isn't fully recognized? I can turn them on and off, set it from 0% to 100%. But I dont see the RPM nor can I pair it with a Fan Curve.
Sorry, I'm not really sure why that is. Is it a laptop? because I know this software has issues with laptops.
@@HardwareForGamers Oh thanks for the fast reply. No its a brand new PC. Its uses this case "Chieftec Hunter GS-01b" the fans came with it.
Its uses a 4 pin PWN connector, and I left everything on "Auto" in the Bios.
While your here, on restart something keeps deleting the "FanControl.exe". Its not the Antivirus, its doesn't have anything in its history about it.
Great app btw.
@@Ragmon1 you may want to email Rem0o (the guy who made the UI) about the exe file going missing or being deleted.
Now about the fans not being controlled, are you using the hub that the case comes with, or you plugging the fans directly into the motherboard?
Plus what operating system are you using. I've had some other people comment that it's not 100% on Windows 11.
@@HardwareForGamers I will try to contact them.
Yea its using a hub... oh now it makes sense. Its getting conflicting information cause the hub has multiple fans connected to it. And its connecting to the motherboard via 1 4 pin connector.
Windows 10 64bit.
Oh my god this is amazing my graphics card temperature is running at 76 since I optimized it on my 2080 super now with my fan speed up just a little bit I’m at 52°C while playing Apex 🤌😎
Great to hear!
👍
im lost my fan now have 0 rpm idk to hard
Can you set a manual speed
@@HardwareForGamers only one fan cna be changed so jus unistalled not much point for me lol
Why at my notebook there are 2 fans but the app doesn't see them??
This software doesn't seem to work on laptops, I think it needs an open UEFI to work properly.
@@HardwareForGamers F
What am i suppose to open it with, when i press open it puts me into firefox???
Are you talking about the zip??? If you are then you will need an extractor like 7zip.
@@HardwareForGamers I have zip, everytime I press open or click on the exe file it puts me into Firefox
Is this like Dragon Center?
No, you can only control fan speed. FYI this typical doesn't work for laptops.