Great video. FYI I have cleaned AR clutch without disassembling rollers from cage by GENTLY spraying small amounts of carb cleaner into AR assembly slowly until visibly clean. Clean outside of sleeve, then allow AR assembly to air dry overnight. Reassemble after tiny bit of oil to AR assembly and most of the time you are good to go
Cleaned many of them. I have a mini arbor press to pop them out of reels. Be careful the plastic cage has little plastic fingers if the are broken off or missing it won't work. Some of the daiwa baitcast reels the O.D. of the clutch is perfectly round. The whole clutch will spin backwards a little 2 part epoxy will fix it.
If you purchase fishing reel cleaner kits, it normally comes with cleanser ( thinnest liquid), oil and grease. Any brand should work. Use the cleanser to wash, then dry, then reapply the new oil or grease.
Some rollers stuck due to the age of reel, dry, rust, dirt and so on. I would try to spay degreaser and leave it for minutes to loosen it from the side plate. Good luck
Hey man, just wanted you to know that I fixed my SLX DC with your tips here. You saved me a bunch of money and time. Thank you so much
Tight lines,, glad that helped
Trying to fix a DC as well but I don't have the right sized wrench for the reel piece.
@@chrissutton8354 I just used needle nose pliers for the nut piece
@stephensands3485 I tried that but I basically sheered the nut. I'll have to give it another go then.
Your video is awesome. Today I cleaned the anti- reverse cluth on my USD 20 cheap bc reel. It works as you said. Thanks a lot man.
Really glad that helps
Just fixed the problem on my quantum reel, thanks for the video
Just cleaned mine, and it works again. Thanks, bro
Glad that helped
Great video. FYI I have cleaned AR clutch without disassembling rollers from cage by GENTLY spraying small amounts of carb cleaner into AR assembly slowly until visibly clean. Clean outside of sleeve, then allow AR assembly to air dry overnight. Reassemble after tiny bit of oil to AR assembly and most of the time you are good to go
Will definitely try your way for my next cleaning, thanks
You are my hero! I saved alot of cash thanks to this vid!
saved me money and i can keep using my reel, thanks
Glad that helps
Cleaned many of them. I have a mini arbor press to pop them out of reels. Be careful the plastic cage has little plastic fingers if the are broken off or missing it won't work. Some of the daiwa baitcast reels the O.D. of the clutch is perfectly round. The whole clutch will spin backwards a little 2 part epoxy will fix it.
Thanks for the tpis
Thanks for sharing, i’ll try to clean and hopefully it back work as normal again 👍🏻
Thank you so much sir , that was very helpful . Now i can saved my money🙏
U smart as hell thank you so much for your help.
Really glad that helps, tight lines
That was very helpful! Thank you sir
Glad that helps
Thank you sir for sharing this information!! Good job
Thank you for helping me with this issue. Subscribed :)
Glad that helps,,, tight lines
Awesome video - thank you for the info - I have and abu Garcia that’s doing just that -
Thanks
Thank you! Very helpful
Good video bro I like it ,👍👍👍👍👍👍👍👍👍
Thanks bro, tight lines
Wow...assume...definitely worked...almost chucked in garbage..
Thank you so much bro
What type of cleaning product did you clean the bearing with?
If you purchase fishing reel cleaner kits, it normally comes with cleanser ( thinnest liquid), oil and grease. Any brand should work. Use the cleanser to wash, then dry, then reapply the new oil or grease.
I’m having an issue getting the roller clutch out of a revo sx any tips?
Some rollers stuck due to the age of reel, dry, rust, dirt and so on. I would try to spay degreaser and leave it for minutes to loosen it from the side plate. Good luck