How to Edit Arming Delay on DSC Power Series Alarm System
Вставка
- Опубліковано 7 вер 2024
- In this video I will explain you how to edit your arming delay on your DSC Power Series Alarm System.
If you want to change your entry delay or your exit delay, I will show you how to do it.
Thank you for watching this video, I hope it will help you to solve your problem.
My goal with this channel is to explain how to do something to solve your problems as quickly as possible.
Make sure to subscribe to find me back next time you look at something on UA-cam, I have a lot of topic on my channel.
Also, do not hesitate to ask questions in the comment, I might give you an answer on another great video like this one.
I accept donations :)
geni.us/HowToP...
Many thanks in advance!
It helps me a lot to make new videos.
Filmed with this cameras :
geni.us/PMAnx80
My microphone
For voice over : geni.us/ZoomH5hr (Amazon)
Camera microphone : geni.us/RODEvi... (Amazon)
Clip Mic : geni.us/tasdr10l (Amazon)
Follow that link to have a deeper look to all the gear I use to make my videos : www.pascalmarq...
Also please take a look at my main UA-cam Channel : bit.ly/UA-camPMA
I use this software to edit my photos : geni.us/LuminarPM
I use Artlist to get awesome royalty free music, get 2 month free on your first subscription here : geni.us/ArtlistPM
I use that service to optimize my affiliate links : geni.us/GeniusRef
As an Amazon Associate I earn from qualifying purchases.
Thanks for your patience. I think that these people didn't watch your video carefully. Haha
Thank you for the informative video , just that I am still not sure if I can add the time delay to my DSC PC1616 with a analog key pad. So my question is can I follow the same programming in your video to put a time delay on my front door and door leading to my garage door ? When the alarm is set it and you open the front door it goes off instantly, this happened after power was loss at the house ..please help and thanks again. 👍🏼👍🏼👍🏼👍🏼👍🏼
J’aime beaucoup tes vidéo petite question tu montre comment programme le delay de sortie pour les portes et portes garages comment séparer les 2 ?
A great help, Thank you!
Hello,
My motion detector is configured as a door contact.
Will you be so kind to make a video about how to configure as a motion detector.
And thank you for all the good videos you made about DSC.
Hi! Yes of course it is already on my plan to do it next year.
But quickly explain, go in *8 menu.
Section 001
Move with the right arrow to the zone of your motion detector.
And input 05 (for motion detector).
Happy holliday! :)
How To
Thank you for the quick response.
However, the message is incomplete, it said read more, but the is nothing after that
After activating Night Arming, how how much time passes between the alarm-triggering event and the alarm sounding? Can it be customized?
It varies depending on the programing.
It's been a while since last time I programed an alarm but if I well remember.
It's in the installer menu *8 and it's in the section 005.
First is Entry Delay 1
Second is Entry Delay 2
Third is arming delay.
Thanks for the video. How can I remove the delay for Stay mode? If I am home and the intruder open the door/window, I would like the alarm sounds instantly. thanks again
Delay canot be modify for stay and away mode.
There will always be a delay on a door, but window should be instant.
@@HowToPM Apparently if you press * 9 then the master code, the system will be armed as "Stay". If you open any windows or doors that have not been bypassed, the siren will sound immediately without any delay.
if I have pressed away do I have to set the eyes as a delay or only the door I only have one entry and exit door but its far from my keypad, but 3 eyes that I pass to the door
When you press away, you have an exit delay. Diring that time the system remain unarm. You can leave passing in front of the motion detector.
Sir, How to program PSTN telephone receiver with DSC neo power series. Please upload a video or give us stepwise programming. Appreciate your help
Hi Raaj. I will do many video in the future about programing those system in the future but it won't be before few months.
Nice video, thanks.
I have a question regarding my PK5508 DSC Panel. How do I extend the entry time on the garage door? Thank you, René
I will eventually do a video about it.
But it's in the installer menu *8.
@@HowToPM Looking forward to it. Thank you.
Does the main door have to be zone 1 and the garage door zone 2 by default for these settings to apply. My garage door is zone 4 on my system
In programing mode (*8), you can apply every zone defenition in section 001.
There is where you set what each zone is. Delay 1, delay 2, window, instant, motion, smoke etc.
There is not really any default setting for that.
It's the installer that program it.
How do I silence the keypad beeps after arming? I don't need to hear the beeps as I leave the house, or at night as I set the alarm - I just want it armed, and then quiet... :) Thanks in advance.
I don't think you can remove it.
It mark the difference between arm to stay and away.
When you leave it should not disturb you to much as you leave and it indicate your delay to leave.
When you arm it for the night, press the empty house instead of doing your code.
It will arm to stay, and will be silent.
@@HowToPM When I arm it for the night, press the FULL house (not empty house as in your response...), right?
Empty house is AWAY - which arms the motion sensors.
Oups sorry, yea you are right, the FULL house is the right one when you stay home. You should have no beep while using it.
In stay mode if windows are violated, it only chimes. No siren going off. What settings do I need to fix? I do have installers code. Any suggestions!
Windows are clearly not in on the right setting.
A window is a ''03''.
You can set zone value in 001 of installer menu.
@@HowToPM Solved! Working fine.
I was testing immediately after arming stay mode. I needed to wait few minutes before testing.
I have 2 Partitions and 16 Zones with my old DSC 832. I want to expand the number of zones and upgrade it with the PC1832 main panel. I also replaced the old LED with new LCD keypads and I am adding new zones. I want to copy existing delay times for the zones using my new PK5500 keypad and to paste them when programing the new PC1832. The problem I have is that after I enter section [005] - System Times it does not ask me for the zone number but there is a 020 number on the LCD screen which represents a 20-sec delay. If I retype 020 it gives me 060 and so on. What is going on here, why the system does not ask me for the zone number?
By the way, it would be good if you demonstrate programing on both Full Message and Fix Message keypads.
Thank you
Hi Dan. Section 005 will let you input 3 type of delay.
Delay 1 : for zone with delay 1 (01 in section 001)
Delay 2 : for zone with delay 2 (02 in section 001)
Exit delay : for when you want to exit.
So in 005 you input the delay acordingly to the zone that are marked 01 and 02 in 001.
Then you input the exit delay.
I will eventually do the full programing video but only with the small keypad because I hate de LCD one. 😉
My entry delay is instant even with away? How do I fix it Bc I tried this and the alarm still goes instant every time I come from home with the away feature
Delay is in *8 menu
Then installer code
Then 005 for delay
First 3 digit are for delay 1 secondes
4 to 6 delay 2
7 to 9 for exit delay.
Sorry there is no easy way to explain it. 😉
Bonjour M, j'ai une centrale DSC pc1616, qui commence à sonné, chaque jour 1mm après la fin du temps de sortir, lorsqu'il est armé. pouvez-vous m'aider en se sens. Merci
Bonjour. Il doit y avoir un détecteur de mouvement qui vois continuellement quelque chose. Quand l'alarme sonne, elle doit indiquer un numéro de zone, il faudrait voir de laquelle il s'agit et vérifier toute l'installation de cette zone.
@@HowToPM Possible je vais regarder mais détecteurs, il faut souligner que j'ai installé 3zones et chaque zones il ya au moins 4 détecteurs monté en série, comment faire pour isoler le détecteur à problème ?
C'est le désavantage d'avoir une zone en série. Il faut procédé par élimination. Ça peut-être long. 😉