Zymexx Steering Wheel Installation 30AE ND MX-5!
Вставка
- Опубліковано 24 лис 2024
- In this video, I show you exactly how to install the Zymexx Yokohama, or any aftermarket, steering wheel on your ND Miata.
Link to the wheel: zymexx.de/mazd...
Thanks for watching!
Sponsored by Lasfit Auto Lighting: lddy.no/mw99
Use code "Ian&Lasfit10" for 10% off at checkout!
The best video on the net to change the steering wheel in the miata. Congratulations!!!
Great video! I love my Guardian Designs wheel, but that Zymexx looks fantastic too.
The torque specs for the 21 mm nut is 30 - 36 lb.-ft. I also recommend leaving that nut on a few threads when pulling the steering wheel to avoid the risk of popping yourself in the face.
Thank you! I appreciate the torque spec and that's great advice!
Great video! I installed a Carbonmiata wheel today. Your instructions were spot on. Thank you!
You’re welcome! Thanks for watching and enjoy your new wheel.
I got my steering wheel will be here in the next few days, thanks for the vid , keep up the good work
Thank you for the video! Just used it to install my Guardians Design steering wheel 👍
Thank you for watching! I'm glad it was helpful! How are you liking your new wheel?
Remember the Guardian design includes a core so the cost is similar and you get to keep the original wheel.
Fair point there. After much debate, I still chose to send mine back and get the core charge refunded because I know I will never want to use the OEM wheel again (after using the Zymexx wheel, the OEM feels quite bland and disappointing). Also, I likely won't get more value out of selling it private party or keeping it with the car compared to getting the core charge back.
Another great video. Very informative as usual. Great detail 👍
Thank you so much!
How did you get this steering wheel without the 12 o'clock indicator on the wheel? I did not see any options for that
I was talking to them about the wheel and I think they had asked me if I wanted it or not, and I said no. I’d reach out to them and ask!
Given how old this video is the link doesn't work. Can you tell me more about this wheel such as model number etc.?
Thanks for bringing this to my attention! It’s the Yokohama model steering wheel by Zymexx, as the description says. Here’s an updated link for it: zymexx.de/mazda/mx5/nd/interieur-nd/zstyle2-yokohama/
There’s 3 variants, the only difference being the color of the stitching. I hope this helps!
By the way, do you know how to make it so they the steering wheel has a bit more resistance or heavier. It's a personal opinion but I'm used to cars with heavier steering wheel and I don't like how light the one on the Miata feels when taking consecutive sharp corners of trying to hold a very long corner.
Get your car aligned to Flyin’ Miata’s specs. It added weight to the steering and made it much more direct/responsive
Hey man how are you? In another video you said you got the zymexx yokohama steering wheel….this is the same one? I cant find it online, do you have a link by any chance? Thanks
Doing well, thank you! Yes, the one in the video is the Yokohama wheel. You can find it here: zymexx.de/mazda/mx5/nd/interieur-nd/zstyle1-yokohama/
Thanks for the quick reply man, now that you have been using for some time what do you think? Any issues? Too big? Too small?
@@lafamilia3014 nope, it’s perfect! Feels like the wheel this car should have came with from the factory
@@DriveMX5you should do a video going through all the mods and additions you have done to your 30AE!!
@@RikhilBhavinShah sadly I sold it in April of last year, got an E92 M3. But my wife and I have a new project to showcase on here soon!
Is this steering wheel noticeably smaller than the stock wheel? I find the OEM wheel too big.
No. There are probably some smaller options but this is the same size as OEM except it is thicker so it feels much nicer in your hands (in my opinion) and it has a flat bottom that does give you a little bit more leg/knee room.
Do you know if it’s possible to get a steering wheel for the nd that has heated steering?
Great question! Theoretically it is possible, but would require wiring in a switch to control it at the least. I'm not sure if any of the aftermarket companies make one with a heating function, and that would be quite a project to do yourself!
What is the point of changing the Steering Wheel?
Personal preference. I find the stock wheel to be too thin and has almost no contours for grip. It feels very generic and unfitting of a sports car that’s all about driver engagement. This wheel and others on the market improve the look and feel of the steering wheel. But again, it’s a subjective thing. Some people like the stock wheel and there’s nothing wrong with that. Same thing for any modification really, the purpose is what the owner is looking to achieve with it.
how do you find the new wheel did you consider alcantara>?
I think I just looked for them online and eventually came across that one. I didn't want alcantara because that material seems to wear and get gross if it's touched by hands or bare skin often.
@@DriveMX5 yeah that is a consideration
Where can I buy it? I also have a MX-5 30th. Thanks 🙏🏻
www.zymexx.de/produkt/mazda-mx-5-nd-rf-zstyle1yokohama-anniversary/
Thanks so much !!!
Interesting video, I have a club. But you have a 30AE so you should leave it as factory speed since it is rare, and should be unmodified.
To each their own. Factory spec is nice, but I'm all for modding my cars and driving them how they're meant to be driven. My car will never be a 'clean' or 'pristine' example so I am okay with modifying it to my taste and enjoying it like that.
İts not hard to take a before after photo bruh 😅
Apparently for me it is 😂 I’m the worst at remembering to do that
WTF is that noise???
Just now seeing this comment. Had to rewatch to see what you meant but man, it is bad! It was cicadas, everywhere at that time of year in central Florida. Didn't realize at the time of filming how much the mic was picking them up.
The guy filming himself and prating on endlessly about how it should be done. But when it comes to SHOW how it's done, which is why video is used, he just shows very short clips and even fast forwards. For the difficult parts you better find other instructions.