Dude the lawn chair and beer to look at the truck is absolute money. I know that feeling all too well. I’m putting some 37/12.5/17’s on my Silverado today and will definitely have to clearance the firewall on it to be able to have a full turning radius. Your truck looks good man. I dig that everything you own is Chevy keep up the good work 😎
Those tires are massive!! Really looking forward to the shop build! I've removed some trees and trimmed up others and we stripped all the sod/top layer of dirt, now we have to bring in LOTS of fresh dirt! Take care and don't work too hard!
I'm planning for a similar project , also prerunner fenders but with40 inch tires and obviously a lift to fit them and your videos on this Silverado are very helpful in giving a good perspective on the planning , thank you so much
Just want to say I only found your channel a few months ago but thoroughly enjoy your videos. Your camera presence is great and fun energy. I, like yourself am a long time Chevy Truck owner. Current ride is a 22 Silverado 4x4 LT. You have given me so much encouragement to start modding. Keep up the great content!
I just decided I want to long travel my 2017 denali today and your videos are exactly the motivation I need...well and the money too! 😂 great video man 🤘
Full length headers, 3-inch w/x-pipe, into 2 Pro Series Corsa Mufflers and dump them just before the rear wheels. That should help with the tire noise a bit. 😉
GET THE MAZZULLA REAR BUMPER AND DOVE TALE CUT THE BEDSIDES. trust me it looks soo good and super clean, he also has a high clearance hitch mouth to go along with the bumper if you plan on towing anything with it.
I noticed your tender spring on your coilovers are coil bound and its going to cause them to break eventually. You'll have to move the crossover nuts down so that it prevents the spring from coil binding.
I'm dealing with Back issues and found if after you jack the truck up and use your jack stands, put the tire on the Floor jack and get it into position to the hub. Helps to have someone assist keeping the tire on the floor jack when moving, but one person can do it alone.
Fuel Wheels - Made by Milwaukee tools - "All FUEL™ tools are part of the M18™ system of over 175 performance driven, trade focused solutions." So that in itself added horsepower!! Hehehe
Old Chevy looks good. However I wouldn’t want to be behind that truck (rocks, debris cracking my windshield), is there anything to prevent the rocks fro, pummeling the vehicle behind (extended flaps, etc). 😂. I enjoy the videos, and you have steered me into a headlight upgrade thank you.
Hey! Trucks coming along nicely. I have an 07 too and it’s been an ongoing project. Quick one, do you have deavers or upgraded leafs in the back? Or are you eventually going linked set up?
![Ultimate Silverado Suspension Mod - LONG TRAVEL CWF [King Shocks]](http://i.ytimg.com/vi/1yaEiuQ_rOM/mqdefault.jpg)
![Ultimate Silverado Suspension Mod - LONG TRAVEL CWF [King Shocks]](/img/tr.png)
![Do WHEEL SPACERS Make A Difference? [DANGER?] BORA Wheel Spacers](http://i.ytimg.com/vi/qMvXt4CudiA/mqdefault.jpg)
It’s only right now to put headers, race mufflers and bedside exit exhaust on it.
Gotta go with 39’s now. 37’s are the new 35’s
Crazy now ngl
Actually true..
Those 37's look fantastic! And, great choice with the Fuel wheels. 😎
Dude the lawn chair and beer to look at the truck is absolute money. I know that feeling all too well. I’m putting some 37/12.5/17’s on my Silverado today and will definitely have to clearance the firewall on it to be able to have a full turning radius. Your truck looks good man. I dig that everything you own is Chevy keep up the good work 😎
Those tires are massive!! Really looking forward to the shop build! I've removed some trees and trimmed up others and we stripped all the sod/top layer of dirt, now we have to bring in LOTS of fresh dirt! Take care and don't work too hard!
YES!! ABOUT DANG TIME👌😮💨 those Ken Block wheels are phenomenal buddy #KB43VER
I'm planning for a similar project , also prerunner fenders but with40 inch tires and obviously a lift to fit them and your videos on this Silverado are very helpful in giving a good perspective on the planning , thank you so much
Best build series on the tube right now. 100% DIY!!!
I'm running 37's on my 2019 trail boss. They're on 24x12's though. Made them fit by watching your videos. Thanks. Much appreciated.
How much lift you need to run 37's on the Trail Boss?
@@michaelwiebe9464 It's on an 8" lift.
Woohoo. Let’s see how this goes.
Just want to say I only found your channel a few months ago but thoroughly enjoy your videos. Your camera presence is great and fun energy. I, like yourself am a long time Chevy Truck owner. Current ride is a 22 Silverado 4x4 LT. You have given me so much encouragement to start modding. Keep up the great content!
Thanks for watching!
I have 35s Toyo mt on my trail boss. Used to have 33s but definitely love the tires
I just decided I want to long travel my 2017 denali today and your videos are exactly the motivation I need...well and the money too! 😂 great video man 🤘
Looking forward to the install of Drew's fab bumper. Been looking at them to put on my truck.
Perfect wheels and tires it's look sick
Trail boss was my fav truck from your channel now this beast of prerunnner is by far my fav truck 💪🏽👍🏽🔥
I’m very excited for the Drew’s fan front bumper. I have the same plan for my truck but wasn’t sure how to start.
Sweet truck is really coming along
Love it. Definitely might be going prerunner the way your rig is.
The truck looks awesome, can't wait to see it finished 🔥
Great wheel and tire choice
Love your content and your work
Great progress. I love it.
Love the content my man! keep up the good work!!!
37s look so sick!!!
5:46 that’s a badass jack where did you get that from?
Love the ken block wheels and long travel set up. Been wanting to do this to our Silverado for years. It pains me to cut into the body
Damn.....looks awesome!!!
lookin hella nice bro! but if you goin to go PRE RUNNER do the tires rite yo... BFGoodrich Baja T/A KR3
Full length headers, 3-inch w/x-pipe, into 2 Pro Series Corsa Mufflers and dump them just before the rear wheels. That should help with the tire noise a bit. 😉
😎
Looks amazing 🤩
Gotta super charge the truck a give it the power to keep up with the massive wheels!
Looking killer!!
I love it 😍
Pull the springs and run the suspension up to the bump stops with wheels turned and report back on the fitment.
GET THE MAZZULLA REAR BUMPER AND DOVE TALE CUT THE BEDSIDES. trust me it looks soo good and super clean, he also has a high clearance hitch mouth to go along with the bumper if you plan on towing anything with it.
I noticed your tender spring on your coilovers are coil bound and its going to cause them to break eventually. You'll have to move the crossover nuts down so that it prevents the spring from coil binding.
Love seeing the progress, looking forward to everything to come, hopefully some power upgrades 😬 maybe a 6.0 swap or something haha
Great looking wheels! We got the same lug nuts lol
#Twinning
Love the content and build !! You inspired me to start a channel so thank you !
Yessah Makaha runnah he said 🤙🏽
🤙🏽🤙🏽
I'm dealing with Back issues and found if after you jack the truck up and use your jack stands, put the tire on the Floor jack and get it into position to the hub. Helps to have someone assist keeping the tire on the floor jack when moving, but one person can do it alone.
Yessah 🤙🏽🤙🏽🤙🏽
Very nice truck
Beast!!
Fuel Wheels - Made by Milwaukee tools - "All FUEL™ tools are part of the M18™ system of over 175 performance driven, trade focused solutions." So that in itself added horsepower!! Hehehe
You need some step bars now for the OG
These rims and tires are awsome on yours trucks!!!
Do you worry about paint chips/wear on the fender areas???? Fender flair in the future?
About to start a similar build on my 4wd truck. I need updates!
I’m doing my trail boss in 2 weeks , it’s a 4.3 v6 w a 4 inch lift and 35 and hoping I have a nuff power for all of it .your video are awesome brother
You should do a trail boss truck meet. Would be fun
The truck just looks BITCHIN tough!!!
Looks absolutely outstanding! Are you going to need to re-gear it? Seems like a lot of new unsprung weight for the 5.3? 🤙🏼
Slow as a turd now... 100% will need to regear
@@LonestarHawaiian or…hear me out…how good would a supercharger whine sound?
Your killing me I wanna see it done nowwwwww😭😭😭😭
Now your gonna have ti regear😂
100% true
do a bedside exit so I don’t have to 😂
Ayy first comment lol always great videos!
Old Chevy looks good. However I wouldn’t want to be behind that truck (rocks, debris cracking my windshield), is there anything to prevent the rocks fro, pummeling the vehicle behind (extended flaps, etc). 😂. I enjoy the videos, and you have steered me into a headlight upgrade thank you.
What kind of suspension you running have the same truck looking to to do some upgrades suspension wise for smoother trail riding
How did u manage for the back tires to stick out as the front. And the front u just upgraded to does control arms ext
Please make a pros and cons Zl1 video
I’ve had those wheels since 2021 😂
Where did you get the grille?
How does the truck drive with the stock gearing? Looking to move up from 35” to a 37” tire with my truck. Same as yours.
What offset did you go with on those wheels?
What are you compensating for
what paint code is your blue? i got a '13 sierra with the WA933L Luxo Blue Metallic, absolutely love the colour
Is there a way to make the headliner in the 07-13 Chevy Silverado black and the map console black
Awesome! What happened to the gas mileage lol? Stock mine gets 12.3
What tools are you using to cut the front bumper metal parts?
3” cutoff wheel from Milwaukee tools. Really good for the job
Hey! Trucks coming along nicely. I have an 07 too and it’s been an ongoing project. Quick one, do you have deavers or upgraded leafs in the back? Or are you eventually going linked set up?
Wheels are sick but what offset did you get?
I'm running the -12 offset on this set🤙🏽
I’d like to have those Moto 33s are you going to sale them
Probably going to throw them on my dad's 99 Silverado
Hows the gearing feel. Any plans with gears. I think those Silverado’s have stock 3.42s
Needs to be regeared...
Needs roll bar
is it $320 per wheel? or all together? cause ik discount tire sells them per wheel. so idk if its the same for realtruck
Bro!....Its been a minute! Did you get that Ultimate garage built!? 🤙
Soon 😎
Rims are basic but classic like em
All that suspension work and it still couldn't clear 37s??
Looks gnarly
You should consider getting tow mirrors instead
Sooo what’s MPG now
Probably 7. Something mpg??
Probably true...
Second
Real truck: Wheels and rims?? So you sell just rims?
Tires + Wheels + Sensors all from RealTruck
Ls fest has been over for a week 😅 get with the program 😅
Still got several videos to edit.
First
Second
9mpg life
Jesus Christian how do you acquire all those rides? UA-cam? Hard physical work? Lottery? PHD?
Lowbedding for life
Somehow got un subbed from the channel! Noticed the video on insta. Back now