Hbada E3 on Amazon amzn.to/4c2LsrF Whole setup list: amzn.to/3Vive8n Update: 15% off another chair + mini desk newtralchair.com/discount/TOOLSELECTRODIY?ref=suupmvia Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html (affiliate links)
On Thangs you will find my tabletop bracket for 3d printing. I can't post the link here but you will easily find it by searching for "hbada tabletop bracket".
Finally someone has done this. Ive been fantasizing about doing something very similar with my office chair for years. Very simple but clever use of the arm rests as the foundation for the desk and with the quick detach magnetic cables connected to a battery bank? Thats genius.
@@ToolsElectroDIYLocked in is like a meme which means very focused or serious, but in this usage of his comment, your gear is literally locked in to the desk. Great joke 😂
I like how sturdy it looks. As a designer, I have a lot of fine detail to do with my mouse and trackpad. It's hard finding a setup with a tray that doesn’t wobble at all.
This is amazing. I would so have gone for this. A few months ago, I had to pack up my studio and temporarily move back in with my parents. I put my office chair in storage and only brought a wooden bar stool (for its height) with me because it fitted my makeshift desk, a wooden workbench on wheels. Sitting day in and day out with no backrest somehow strengthened my spine, and now it feels so normal I would never go back to sitting on an office chair again. Super cool project though 🤩
bro i laughed so hard. this is awesome. This is exactly something i was looking for. The mesh on the bottom of the chair to reduce the heat in the summer. The arm rests to relieve tension when typing. The different positions you can bend your feet in. And the desk ofcourse. Some fair points that you stated for the arm rests, they might be a bit too short. Ideally i want to use a Keychron Q11 split keyboard in front of the laptop. This is almost perfect !! So i should make the desk a bit better i guess. I love it, thanks for sharing bro ! This really made my day.
Brilliant! I can’t build that desk, so I’ll have to search for one, or.. pay to get one made by carpenter. This is perfect for me. Will use your links for mods.
I clicked. I saw first 5seconds. I pressed like. I left this comment. Closed video. GOOD JOB! I understood everything I needed to understand in 5seconds.
I use a Lazyboy chair with feet up with corsair k63 wired lapboard and cheap DIY computer desk to get the monitors in the correct position over the Lazyboy chair.
Amazing setup. A few weeks ago I purchased this chair and had been fantasizing with a similar setup after checking out how comfortable it is while reclined. Thank you for the ideas and the Amazon list!
There was something like this done by Herman Miller but it was a desk called Envelope desk and the famous embody chair designed for it. You could recline and pull the desk toward you
My dream setup! The magnet idea is perfect I hope this inspires more similar chair designs. Only thing I would personally like is the table to be a swivel
I have a very similar setup ... but I do it at my desk.. I have a costco gaming chair and put a round ottoman with storage at the feet for support.... not complicated setup needed.
You have my respect and envy. Amazing vision and implementation. That chair is unique and thoughtfully designed. If I had a setup like this, I would be happy to work everyday xD. May I know what is that 3 sided wall socket adapter?
Thanks, also watch the 2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html I'm not sure I understand "3 sided wall socket adapter?" could you send me the timestamp in the video where you saw it?
Love it. Did you think about using a electronic magnet that engages wen you contact your hand on 2 prongs mouse or desk. I wanted to do this same thing but I'm to tall for every chair in existence :( PS. I have not tried chairs that cost more than 1k. pps. that mouse u have is a good option but I like using my 14+ buttion mouse('s)
I recently had a herniated disc in my neck that causes severe nerve damage. Just got that disc replaced. During that time and even now i wish i had this setup. I wish it was all made as a kit vs separate parts. I might start with the chair… any reason you picked that one specifically?
Great consept to work long time .Still human beings have to move every 30 minutes ideally. This will help a lot. Wish you the best for you and your channel
Awesome project, Im in love with your work :) Could you please tell me which is the aprox measurement/ height from the sitting area to the top of the arme rests? Because I would need them to go under the desk to work comfortably with my chest near the desk side. 😅
It would be perfect if the table top swiveled away to get out vs off like medical or tv chairs have. With my injury i would not want to lift a table onto a chair
The perfect blend of style and comfort! 😍 This office chair not only looks sleek but also offers great back support. Add a few accents from home kit decor to elevate your office vibe! 💪🖥
Leg knee support needs to be bended so the knee will not stay too long straightened. Monitor should be higher and in center so when it is fully reclined eyes to monitor is aligned and no need to bend down the neck or head.
What came to my mind when I saw the thumbnail of the video, before even watching it, is the GIF "shut up and take my money", just like the person whose message we see in 0:30
@@ToolsElectroDIY Wow. Such a quick response! Thank you, good sir! I live in a small RV so I will have to consider both options. Again thank you for sharing your DIY!
I'm looking to buy a new chair that reclines. My back needs a lot of support and I work 8+ hours as a designer. Which chair and desk do you recommend for being the most comfortable most ergonomic for long hours?
@ToolsElectroDIY thanks, I got the Newtral Magic model with full back coverage and footrest. I love it. I use the tray for wireless keyboard, wireless trackpad, and Logitech mouse. I can recline while viewing the large monitor on my regular electric standing desk.
You should put a patent on this because someone is gonna to steal your idea and mass produce it, or you can mass produce by designing an adjustable bottom holder to snap onto the arm chair rest
The width does not matter. Don't measure, just fit them and put on screws. And you can adjust the tightness / friction easily, which is very hard to do by measuring.
@@ToolsElectroDIY here can I contact you? I am trying to find your contact. I dont want to give it away, except to you! its related but you can be the boss of it. C-Chair
Nice setup. What to use so the laptop is not moving and where to buy it? And why do I need the hiercol? Is the powerbank not enough for all? I didn’t understand that part.
I want to ask, how to build it with an added of display pen tab for digital art that attached to laptop / pc? Is it possible to make the desk longer? Or make another layer of the desk for display pen tab?
@@ToolsElectroDIY I was looking for quick info its true i didnt fully watch your video, i am looking for that desk why would i sit here and watch this video fully for only a desk i am looking for
Cool concept but i'll stick with my hammock + support for mouse and 55 tv as monitor its even more comfy trust me, just be careful against falling asleep on it lol
ive been trying this too from a while.. but only at a personal level.. the thing is i have a workstation.. and i put it at back.. and 2x 32" screens, but my chair was steelcase.. i could share my design with habata, but disclaimer.. my product is for professional and professionally finished.. sub for mre
Nicely done! To hold bigger monitors look at the #HermanMiller #EnvelopDesk it’s basically what you have here with more capacity with the Herman Miller #EmbodyChair
@@ToolsElectroDIY yeah, the Herman Miller envelop desk and embody chair work in concert together, where when you lean back in the embody chair, the desk follows the same curvature because you can pull the top of the desk toward you and it articulates and curves kind of like how you have your chair set up with the wood top on top of the armrest
listen guys. You dont need the table to "recline with the chair". I am using a simple gaming chair with a recline funktion like this for years. recline your chair und get close to the "normal" desk. I use monitor arms to bring the monitors closer and adjust the angle. Rest your arms on the desk. as simple as that just try it
Yes, I already created 2 short videos on that topic a few weeks ago.. See ua-cam.com/users/shortsc5OlG2HHNeY?feature=share ua-cam.com/users/shortsNK4TIfadSiY?feature=share
As much as i love the idea, i think you didn't look at the worst designed tool that we use everyday: the keyboard. There are many new ergonomic keyboard designs. It's kinda hard to get into split keyboards, choosing how many keys you need, finding a way to learn the layout, but man it's worth it. You should look into it.
Hbada E3 on Amazon amzn.to/4c2LsrF
Whole setup list: amzn.to/3Vive8n
Update: 15% off another chair + mini desk newtralchair.com/discount/TOOLSELECTRODIY?ref=suupmvia
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
(affiliate links)
only thing missing in this chair is a hole in the seat and a funnel
I designed a 3D printed bracket that allows you to mount the tabletop. Search on Thangs for "tabletop bracket for Hbada E3". Enjoy
On Thangs you will find my tabletop bracket for 3d printing. I can't post the link here but you will easily find it by searching for "hbada tabletop bracket".
@@webgpu Your million dollar suggestion didn't get 20 million likes. That's a crime by viewers!
Finally someone has done this. Ive been fantasizing about doing something very similar with my office chair for years.
Very simple but clever use of the arm rests as the foundation for the desk and with the quick detach magnetic cables connected to a battery bank? Thats genius.
Thanks! I've been wanting to do this for years too :D Stay tuned for more interesting ideas.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Thank you sir For the Link ❤ I don't want loose any video of you 🔥❣️@@ToolsElectroDIY
Reminds me of when I was a toddler, I used to use one of those to eat.
good old days.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
i prefer using a fork to eat. It is lighter.
This man is locked tf in
Why
@@ToolsElectroDIYLocked in is like a meme which means very focused or serious, but in this usage of his comment, your gear is literally locked in to the desk. Great joke 😂
@@InternalErrorX Nice one, thanks!
@@InternalErrorX Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
No longer locked in. Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I like how sturdy it looks. As a designer, I have a lot of fine detail to do with my mouse and trackpad. It's hard finding a setup with a tray that doesn’t wobble at all.
My 2nd design is ua-cam.com/video/1qWVdLeWo_M/v-deo.html
This is amazing. I would so have gone for this. A few months ago, I had to pack up my studio and temporarily move back in with my parents. I put my office chair in storage and only brought a wooden bar stool (for its height) with me because it fitted my makeshift desk, a wooden workbench on wheels. Sitting day in and day out with no backrest somehow strengthened my spine, and now it feels so normal I would never go back to sitting on an office chair again. Super cool project though 🤩
Thanks, see my 2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
bro i laughed so hard. this is awesome. This is exactly something i was looking for.
The mesh on the bottom of the chair to reduce the heat in the summer.
The arm rests to relieve tension when typing.
The different positions you can bend your feet in.
And the desk ofcourse.
Some fair points that you stated for the arm rests, they might be a bit too short.
Ideally i want to use a Keychron Q11 split keyboard in front of the laptop. This is almost perfect !! So i should make the desk a bit better i guess.
I love it, thanks for sharing bro ! This really made my day.
Thanks, 2nd design is ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Brilliant! I can’t build that desk, so I’ll have to search for one, or.. pay to get one made by carpenter. This is perfect for me. Will use your links for mods.
Thanks! Also watch my 2nd gen design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I clicked. I saw first 5seconds. I pressed like. I left this comment. Closed video. GOOD JOB!
I understood everything I needed to understand in 5seconds.
Glad it helped!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I use a Lazyboy chair with feet up with corsair k63 wired lapboard and cheap DIY computer desk to get the monitors in the correct position over the Lazyboy chair.
My end design is here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Amazing setup. A few weeks ago I purchased this chair and had been fantasizing with a similar setup after checking out how comfortable it is while reclined. Thank you for the ideas and the Amazon list!
Glad you like it!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Thank You so much for making this video! I LOVE the Minimal Setup! You gave me ideas now! 💖💖💖
Please also watch 2nd Recliner Workstation Design with Sihoo Doro S100 Ergonomic Office Chair
ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I'm tempted because I've got the chair already and it would keep seated & move to any room indoor and also onto the patio area hmm
I'm designing the 2nd gen recliner workstation. See latest updates on my Instagram page, or UA-cam Shorts.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
There was something like this done by Herman Miller but it was a desk called Envelope desk and the famous embody chair designed for it. You could recline and pull the desk toward you
Good to know. Please watch my 2nd design here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
My dream setup! The magnet idea is perfect I hope this inspires more similar chair designs. Only thing I would personally like is the table to be a swivel
Thanks, the swivel design will probably be in the next version, which is obviously more difficult to build.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I have a very similar setup ... but I do it at my desk.. I have a costco gaming chair and put a round ottoman with storage at the feet for support.... not complicated setup needed.
2nd gen design here, please watch ua-cam.com/video/1qWVdLeWo_M/v-deo.html
You have my respect and envy. Amazing vision and implementation. That chair is unique and thoughtfully designed.
If I had a setup like this, I would be happy to work everyday xD. May I know what is that 3 sided wall socket adapter?
Thanks, also watch the 2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I'm not sure I understand "3 sided wall socket adapter?" could you send me the timestamp in the video where you saw it?
@@ToolsElectroDIY I mean those sockets on the wall where the floor lamp is connected to :)
12:19
you can install some battery in the chair and a wire will connect to the main miny desk, saving some more room from the miny desk.
Good idea. More integration will be dying in the future. Stay tuned.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Not much of a fan of the desk module, but the chair... This chair is what I have been looking for!
glad you like it, link in description. also watch my 2nd design.
Love it. Did you think about using a electronic magnet that engages wen you contact your hand on 2 prongs mouse or desk. I wanted to do this same thing but I'm to tall for every chair in existence :(
PS. I have not tried chairs that cost more than 1k.
pps. that mouse u have is a good option but I like using my 14+ buttion mouse('s)
Cool idea!
It's great. Well done. You could take it to a tech exhibition so people can try it out.
Good idea!
Its cool that you managed to make this, am curious what's the advantage's vs an height adjustable desk
I use standing desk too. This one is more relaxing.
Oh wow I might actually have to try this myself
Sure! Before you do, please watch my 2nd gen design here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I recently had a herniated disc in my neck that causes severe nerve damage. Just got that disc replaced. During that time and even now i wish i had this setup. I wish it was all made as a kit vs separate parts. I might start with the chair… any reason you picked that one specifically?
This video is sponsored by Hbada (I mentioned it in the video)
He also stated that this was only viable due to the style of the chair as well…arm rests move w motion of the backrest
@@waynesandoval4493 that’s right if you can find any other chair that has arms move with the back support, the same design applies.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
My friend, that is my dream.
Coding in C++, Game dev, some anime, Jazz, and that setup, thats the dream :D
Please watch my second design: 2nd Recliner Workstation Design with Sihoo Doro S100 Ergonomic Office Chair
ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Решение эксперементальное. Осталось выяснить для каких дел, игр, отдыха подойдёт такое кресло
See the 2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
А теперь налейте себе кофе и попробуйте поработать за этим столиком
@@oleg-s5s я художник фантазий, практиковал чтение на природе, на пляжах... И на стуле это делать комфортно.
Can you share how you made the wooden table for laptop 💻 ? Would be really helpful on the measurements !
It’s a recycled piece of door
@@ToolsElectroDIY 🤗
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Really well done! A desk chair is the way to go. That chair looks so flimsy though. Each adjustable click makes me think it's gonna break.
Watch durability test: ua-cam.com/users/shorts9NwJBc8BK_g?feature=share
ver nice, but why lights above the display?
It's a review unit from BenQ. I'm testing it too.
Great consept to work long time .Still human beings have to move every 30 minutes ideally. This will help a lot. Wish you the best for you and your channel
Thanks, you too!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Look into trackballs ‘ trackpads track point for pointing device. Do share open source your diy.
Good idea
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Awesome project, Im in love with your work :)
Could you please tell me which is the aprox measurement/ height from the sitting area to the top of the arme rests? Because I would need them to go under the desk to work comfortably with my chest near the desk side. 😅
The chair size info can be found on the product page, link in video description, thanks for your support!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Home Office at its finest
Thanks, pls also watch the 2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Seeing my dream come true 😂 great work
Thanks 😅 you can do it too.
one word: genius
Thank you. I'm designing the 2nd gen recliner workstation. See latest updates on my Instagram page, or UA-cam Shorts.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
woooow!, i'm watching while feeling my neck pain during studying
really?
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Please share all the dimensions of the desk.
34" x 13.5"
It would be perfect if the table top swiveled away to get out vs off like medical or tv chairs have. With my injury i would not want to lift a table onto a chair
@@jissanhuq3792 that would be the 2nd Gen.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
The perfect blend of style and comfort! 😍 This office chair not only looks sleek but also offers great back support. Add a few accents from home kit decor to elevate your office vibe! 💪🖥
I’m glad you like it!
Leg knee support needs to be bended so the knee will not stay too long straightened. Monitor should be higher and in center so when it is fully reclined eyes to monitor is aligned and no need to bend down the neck or head.
Thank you. I'm designing the 2nd gen recliner workstation. See latest updates on my Instagram page, or UA-cam Shorts.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Having back problems, it looks like a good relief for the back…or am I wrong?
You are correct.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Cool project! Clever simple solution.
Thanks for your kind comment!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
What came to my mind when I saw the thumbnail of the video, before even watching it, is the GIF "shut up and take my money", just like the person whose message we see in 0:30
Yes, haha thanks!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Yes, this is what I needed.
Thanks you can also watch my 2nd design here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
@@ToolsElectroDIYoh man, you’re awesome 👏
I totally need to do this!
Don't do it until you watch the 2nd gen design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
@@ToolsElectroDIY Wow. Such a quick response! Thank you, good sir!
I live in a small RV so I will have to consider both options. Again thank you for sharing your DIY!
@@darthslackus499 3rd design coming soon, stay tuned :)
@@ToolsElectroDIY Will do!
I'm looking to buy a new chair that reclines. My back needs a lot of support and I work 8+ hours as a designer. Which chair and desk do you recommend for being the most comfortable most ergonomic for long hours?
This chair I'm featuring is great! But expensive...
@ToolsElectroDIY thanks, I got the Newtral Magic model with full back coverage and footrest. I love it. I use the tray for wireless keyboard, wireless trackpad, and Logitech mouse. I can recline while viewing the large monitor on my regular electric standing desk.
How cool! This is genius
Thanks! The 2nd design is here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
This is super cool and has inspired me to make a custom desk myself, thank you
Please also watch the 2nd design before you build one ua-cam.com/video/1qWVdLeWo_M/v-deo.html
My neck is paining after sitting on my dumb chair i think this a perfect product where to place order?
Link in video description
WE ARE COMING UP ON SOME WALL-E SHIIIIEEET
cool check my 2nd design
Nah I would actually like more info on building the board (any links?) and the type of four 9-inch pieces.
Scrap wood recycled furniture door LOL
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Where can I find the wood desk? Or you make it by yourself?
Repurposed old door
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Dude that's so awesome
See the 2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
This is exactly what I need!
Link in video description :)
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Genius DIY❤❤❤
My 2nd design is here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Why didn't you mount the battery underneath? Looks like there's clearance even when it's sitting on the table.
I'd like to see the battery status screen.
@@ToolsElectroDIY mount it under and add a cutout window, so the led battery screen is flush with the desk....
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
What’s the dimensions of the desk? Or perhaps of the original door
34" x 13.5" -- but it doesn't matter, you can cut it to any size you want, as long as it is stable.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Hey, very nice video. But honest and just curious Question: Did you buy it or did you got the char sponsored?
Sponsored. Not sure if you washed my full video I thought I said that the beginning it was sponsored.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Thank you 👍🏻
My pleasure
What are those sliders called you use to hold the power bank?
It is amzn.to/4531jED (affiliate link, Power Strip Holder, 5 Pack Self Adhesive Power Strip Holder)
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
You need to add motorized wheels for chair, so you can go to kitchen get a beer w/o getting off. McDonalds DriveThrough is also an option.
thanks for your feedback
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Does this recliner go into a zero gravity position? It looks VERY promising.
not entirely flat.
You should put a patent on this because someone is gonna to steal your idea and mass produce it, or you can mass produce by designing an adjustable bottom holder to snap onto the arm chair rest
Thanks I may work on it.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Great video. what's the width of the mount below desk which you can place it on the arms of chairs?
The width does not matter. Don't measure, just fit them and put on screws. And you can adjust the tightness / friction easily, which is very hard to do by measuring.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Good Job! It looks awesome!
Thanks!
@@ToolsElectroDIY here can I contact you? I am trying to find your contact. I dont want to give it away, except to you! its related but you can be the boss of it. C-Chair
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Nice setup. What to use so the laptop is not moving and where to buy it? And why do I need the hiercol? Is the powerbank not enough for all? I didn’t understand that part.
The components list is in the video description. You don’t have to get the USB-C hub. I use it because it avoids many connections to the laptop.
@@ToolsElectroDIY which one is to stop the laptop from moving?
@@AbeliKure I don’t have a link to that one, but you can use any tape or cable management cubes
@@ToolsElectroDIY i dont understand can you link it please? How would it stop it from moving.
@@ToolsElectroDIY please answer
This is nice
!
Thanks! Check my latest video for new ideas!
I want to ask, how to build it with an added of display pen tab for digital art that attached to laptop / pc? Is it possible to make the desk longer? Or make another layer of the desk for display pen tab?
1. use magnets. 2. yes, but need a different and stronger mounting brackets .
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
The Wall E chair has arrived
2nd design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Do you know a budget version of the chair with reclining arm rest? As far as I remember, other chair doesn't do that.
I don't know a budget version of this.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I need that desk attached to the chair you did not show that anywhere no link
If you paid attention to the video, you probably will notice I spend a minute or two showing how it was made. Also read my video description. Thanks.
@@ToolsElectroDIY I was looking for quick info its true i didnt fully watch your video, i am looking for that desk why would i sit here and watch this video fully for only a desk i am looking for
Cool concept but i'll stick with my hammock + support for mouse and 55 tv as monitor its even more comfy trust me, just be careful against falling asleep on it lol
Watch my 2nd design: ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Great idea! Thanks for listing all the part. By the way, where did you buy the desk from?
It’s a recycled repurposed furniture door
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
That is really amazing. Could you tell me your height? My height is 163cm, and I'm worried if the chair will fit well for women too.
I'm 168cm. Not much taller than you :)
@ToolsElectroDIY Thanks!👍👍👍
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
My new workstation! I’ll be soooo productive.
After 10 minutes: zzZZZzzZzZzzzz
The 2nd gen design is here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
You are a genius!
Thanks. Check out the latest video update: ua-cam.com/users/shortsqLCI9_5S7Xk
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
My girlfriend has rheumatoid arthritis and she cannot use Laptop the traditional way.
This could be a life changing invention.
good to know, also watch my 2nd design!
Where can I buy this
Links in description
ive been trying this too from a while.. but only at a personal level.. the thing is i have a workstation.. and i put it at back.. and 2x 32" screens, but my chair was steelcase.. i could share my design with habata, but disclaimer.. my product is for professional and professionally finished.. sub for mre
good to know, please post a video, thanks!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Would love to order this chair, but this company doesn't reply to may email?!?!?! Any advice, as the chair is out of stock and they don't reply?!
no idea.
I have always thought this is the future of workstations. The modern office needs an ergo redesign.
2nd gen design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
I use my recliner, wireless keyboard and mouse, super easy. With my mounted TV on the wall
Good to know
If sitting is the new smoking, this is even better
See my 2nd design here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Can I rise table higher?
Yes
@@ToolsElectroDIY I can’t find to buy table I find chair everywhere but not table
Do you make the desk on demand basis along with chair?
I don' have plans to sell the desk yet. But you can find the chair link under my video
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Impruve Aluminum table or fyberglass
ok
Nicely done! To hold bigger monitors look at the #HermanMiller #EnvelopDesk it’s basically what you have here with more capacity with the Herman Miller #EmbodyChair
Mouting regular large monitors on the chair will make it top heavy. They need to be mounted somewhere else.
@@ToolsElectroDIY yeah, the Herman Miller envelop desk and embody chair work in concert together, where when you lean back in the embody chair, the desk follows the same curvature because you can pull the top of the desk toward you and it articulates and curves kind of like how you have your chair set up with the wood top on top of the armrest
@@TheCouplesTakeOn Yes, that's my planned design with the existing standing desk at home. Dual monitor setup.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
😲 I need this!
sure. The 2nd gen design is also available on my YT channel.
Thats awesome 👍
Thanks 👍 The 2nd design is available here ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Hello can you please tell me brand of powerbank or where to buy?
Good question. The components list is in the video description. Dedicated power bank review on my UA-cam channel.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Reminds me of the Pixar movie, Wall-E
sounds good
The cost?
Links in video description
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Fun stuff!
Haha yes!
listen guys. You dont need the table to "recline with the chair". I am using a simple gaming chair with a recline funktion like this for years.
recline your chair und get close to the "normal" desk.
I use monitor arms to bring the monitors closer and adjust the angle.
Rest your arms on the desk.
as simple as that just try it
Yes, I already created 2 short videos on that topic a few weeks ago.. See ua-cam.com/users/shortsc5OlG2HHNeY?feature=share
ua-cam.com/users/shortsNK4TIfadSiY?feature=share
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
As much as i love the idea, i think you didn't look at the worst designed tool that we use everyday: the keyboard.
There are many new ergonomic keyboard designs. It's kinda hard to get into split keyboards, choosing how many keys you need, finding a way to learn the layout, but man it's worth it. You should look into it.
Yes I have tons of ergo keyboards and mouses from ProtoArc. I may do a review soon. Stay tuned.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
This is amazing!
Thank you!
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
Could you share the dimensions of your mini desk ?
It’s in the video description
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
How much?
Link in description
love u! I will do it !
Don't do it before you watch my 2nd Gen design ua-cam.com/video/1qWVdLeWo_M/v-deo.html
try a trackball ergo m575, love the cat cameo :p
sounds good
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html
How do you hold the MacBook?
it's in the video. rubber stopper.
Watch the 2nd Gen design video ua-cam.com/video/1qWVdLeWo_M/v-deo.html