Isn’t polyfiller what we call spackle in the states? If so, isn’t the stuff a bit brittle? Won’t the different expansion and contraction rates of the window versus the wall cause that filler to crack over time? I would think some type of sealant (we call it all caulk over here) would be more rubbery and flexible.
Polyfilla isn't brittle it's quite soft, it probably won't crack itself but there will always be a crack around the window frame because the pvc expands quite a bit in the sun. And from opening and closing the window. I'd use a polymer/acrylic sealant now while it's all clean and smart rather than having to do it in 6 months just to save the upheaval.
Hi P&D, hope you are well. If only they'd removed the film immediately. Nice clean job as usual. I enjoy watching a professional at work, lots of tips to pick up. Have you ever done a video about spray foam, when/how to use, guns, etc. I'd be keen to see that. I saw a chippie once put his foam canisters in a basin of warm water (don't know why). Saw him take a part used can off the gun then seal the can with saliva? He wasn't keen to give away his 'secrets'. Thanks for sharing. Stay safe and keep up the good work. PS. Need to get myself a rotary cutter now. :)
The modern version is a £20 gun, it will be made of stainless steel but coated in teflon, you can use a can as required, keep the can on the gun if you don't use it all and it will stay fresh for 2 years. if you do use it all simply put another can on right away. Only if you store the gun without a can on do you need to clean it between uses.
It happened on one of my jobs plasterer plastered over the new fitted windows with the film stuck on. Customer refused to take it off and then blamed me for the cracking. I did dig most of the plastic out but the customer was to blame I walked off the job he was that bad as did all the other tradesmen lol. Been having problems with zinzer 1-2-3. I have been preparing the string on staircases using foam and fill technique and then been sealing the filler with the primer when dry and it hasn’t been adhering to it. Was wondering if anyone else thinks 1-2-3 is getting worse and not priming stuff it should be priming or it’s lost it’s edge? BIN has been fine but the 1-2-3 has been hit and miss just wondering if anyone else has been having an issue with it
Well worth trying toupret tx110, this is my go too. In truth though most people tend to stick to one filler as you get to know the drying times etc, the polyfiller certainly isn't bad.
@@paulf2529 I’ve always struggled with mixing the toupret, lovely to sand and not having to prime it is great though. I often first coat with easi fill then topcoat with a thin coat of toupret. The ready mixed stuff is good too
Depends what the customer wants.. but generally estimate a price.. usually stick to it.. always finish on time.. occasionally you may have hidden problems. Thanks
I'm not sure about the neater. Personally I don't like the look. Also there is no such thing as too much work if it's what the client wants and in any case this is hardly adding anything anyway.
How is it neater than a well cut in colour up to the frame? If anything it’s exactly the same. P&D does a proper repair every time, hence the time and effort of what he did, rather than sticking a trim over dodgy silicone
Expanding foam to the rescue again…love it…!
I normally use acrylic frame sealant which is paintable. Always served me well .
Good, neat job! Thank you for sharing some decorating tips
Thank you your welcome.
Isn’t polyfiller what we call spackle in the states? If so, isn’t the stuff a bit brittle? Won’t the different expansion and contraction rates of the window versus the wall cause that filler to crack over time? I would think some type of sealant (we call it all caulk over here) would be more rubbery and flexible.
Polyfilla isn't brittle it's quite soft, it probably won't crack itself but there will always be a crack around the window frame because the pvc expands quite a bit in the sun. And from opening and closing the window. I'd use a polymer/acrylic sealant now while it's all clean and smart rather than having to do it in 6 months just to save the upheaval.
@@TomTomTomTom538 I wonder what the equivalent of pollyfilla is in the states. Sounds like an elastomeric spackle.
We use foam then powder filler on top . Foam acts like a shock absorber helping to reduce the chance of cracks. Thanks
Hi P&D, hope you are well. If only they'd removed the film immediately. Nice clean job as usual. I enjoy watching a professional at work, lots of tips to pick up. Have you ever done a video about spray foam, when/how to use, guns, etc. I'd be keen to see that. I saw a chippie once put his foam canisters in a basin of warm water (don't know why). Saw him take a part used can off the gun then seal the can with saliva? He wasn't keen to give away his 'secrets'. Thanks for sharing. Stay safe and keep up the good work. PS. Need to get myself a rotary cutter now. :)
Thanks.. we use all in one trigger and can.. not used a cartridge gun yet. But will get on e at some gap..
The modern version is a £20 gun, it will be made of stainless steel but coated in teflon, you can use a can as required, keep the can on the gun if you don't use it all and it will stay fresh for 2 years.
if you do use it all simply put another can on right away. Only if you store the gun without a can on do you need to clean it between uses.
Cowboy installation, It gets me so mad that simple tasks are not carried out.
Especially when it states “take off immediately after installation “ lazy buggers…
Nice job and as you have said before minimum disturbance.
Thank you.
Very good job. Thanks
Thank you..
Great stuff.
Thank you.
Nice work!
Thank you
I have had to poly filler a large area of wall after sanding it down does it sealing with something prior to painting or wallpaper going on top of it
You can seal it using diluted paint or PVA. PVA like milky water so it soakes in. Thanks
How do you keep the expanding foam reusable so it doesn't set in the tube ? Cheers
I think there is a video showing this on his channel somewhere
What about if it’s come unstuck from wall new windows install kind regards
It happened on one of my jobs plasterer plastered over the new fitted windows with the film stuck on. Customer refused to take it off and then blamed me for the cracking. I did dig most of the plastic out but the customer was to blame I walked off the job he was that bad as did all the other tradesmen lol. Been having problems with zinzer 1-2-3. I have been preparing the string on staircases using foam and fill technique and then been sealing the filler with the primer when dry and it hasn’t been adhering to it. Was wondering if anyone else thinks 1-2-3 is getting worse and not priming stuff it should be priming or it’s lost it’s edge? BIN has been fine but the 1-2-3 has been hit and miss just wondering if anyone else has been having an issue with it
I think Zinzer cover stain is better and its oil based dries in no time . 123 is water based as far as I remember never liked the 123 .
Do you buy wet Polyfilla or the powder? I recently tried the powder and it seemed much better.
Mostly use powder filler.. although sometimes on a large job with small numerous holes, it's good to have a tube of ready mixed in your pouch. Thanks
Well worth trying toupret tx110, this is my go too. In truth though most people tend to stick to one filler as you get to know the drying times etc, the polyfiller certainly isn't bad.
@@paulf2529 I’ve always struggled with mixing the toupret, lovely to sand and not having to prime it is great though. I often first coat with easi fill then topcoat with a thin coat of toupret. The ready mixed stuff is good too
I've never asked you, do you get paid by the hour or the job?
Depends what the customer wants.. but generally estimate a price.. usually stick to it.. always finish on time.. occasionally you may have hidden problems. Thanks
@@PaintingandDecorating ok thanks for replying 👍
👍👍👍
After 8 minutes I had to switch this off!!! I get it it's stuck to the plastic film!! It only takes 30 seconds to show this not 16 bloody minutes
🙂👍👍
Thank you..
To much work just get 10cm strip finishing plastic go all the way round window much neater when decorating
Yes but the plastic is not needed and changes the whole look of a neat flat wall.
That or a pvc quadrant moulding works nicely.
I'm not sure about the neater. Personally I don't like the look. Also there is no such thing as too much work if it's what the client wants and in any case this is hardly adding anything anyway.
How is it neater than a well cut in colour up to the frame? If anything it’s exactly the same. P&D does a proper repair every time, hence the time and effort of what he did, rather than sticking a trim over dodgy silicone
cowboy