I purchased it today and I think this is an awesome device. I used to have disconnection issues with the modem provided by my ISP even if it's just right in front of me. The deco m5 solved this problem. I can now play without any delays or disconnections.
I have to say I purchased a Deco M5 today and came across your review. This was a lot better than pretty much any review I’ve watched on here and quality and editing was spot on. Keep it up!
Question, If I connect the 2nd Deco while it's in the same room as the primary one and after the 2nd one is connected, Can i unplug it and take it upstairs and downstairs and connect it there? Will the two deco still be paired or will it lose connection and I'll have to connect them again when it's upstairs/downstairs.
Definitely the best review of this unit I've seen. I can see you're a serious PC user too from the great custom build in the background. Top notch mate! Thank you.
Just got a Deco M5 system, and reading the info from TP Support, Viewing other Vids, and scanning help Forums I was dreading setting this up (my tech knowledge is limited) until i came across your video. You knocked in in to a tin hat, plain and simple, and easy to follow. I feel more confident in giving this ago myself. So thank you and keep up the good work.
Gread tutorial. I have set up several of these systems so just letting those know, if you have devices such as computers/printers connected to the LAN ports on your current Modem/Router and want to keep your existing DHCP server from your current router assigning the same IP range so all devices 'talk' on the network - make sure you swap over to Access Point mode after setting up. Keeping it in Router mode means the Deco will assign new IP addresses on the new WiFi system to that of the current modem/router you already have and they won't 'talk' to each other.
After I installed this system yesterday night and connected my series X it encountered a error saying I had double NAT. But from watching this Im sure I have the answer to my problem. I will change the settings from router to access point.
Hello.I'm glad that there is someone here with the lights on. I bought an M5 and followed instructions. M5 connected to a port on my TP Link router. Your instructions are perfect and its running. Download speed test to my Android phone on wifi was 150mbps.....to my wife's Gateway laptop in another room with an M5 pod nearby was 100mbps download. We have Xfinity 1Gb internet. Wired computers get 900mbps download and 40mbps Upload. I'll take a W A G that if the M5 was connected to a MODEM that the real hi speed happens. I need a router for the setups of static addresses and ports I need opened to connect to servers over the interwebs...and ports opened for Xbox happiness...thanks
I consider buying this system. Just a question about setting up an additional pod. Does the location of the additional pod require a minimum internet speed at that location? If so, how do I know what it is?
Thanks so much for input on these devices. I was starting the process of ordering Deco M5s for my situation. I contacted TP Link to have them give me input and information to confirm my application and selection. This is my situation. I have a installation needing 3 devices. The base and a 2nd Deco some 30 ft apart in the main house (only 1 floor) and a 3rd Deco in my external shop which ii is about 100ft from the house. I currently use a wifi extender to provide wifi in the shop. After much discussion with TP Link support they would not recommend their product more than 50 ft from the main house. I told them I was testing this configuration with another supplier's equipment and it was connecting. Thus I don't see how to proceed with TP Link. I really wanted to use the Deco M5 devices. My question is do you see my configuration as not applicable for setting up 3 Deco M5s because of the 100ft distance of the third Deco ? Also I plan to setup my mesh in access point mode as I want to keep my modem/router configuration in service. Your input si greatly appreciated. Thanks.
Hey there. After setting up the 1st deco, can you move it to another spot away from the modem/router? Or it should always be connected to the modem/router as you showed in the initial setup??
It seems the videos I watched on the M5 have all setup the first pod with an existing router. I have an older Linksys 2500 router that I am reluctant to use as I think it may be a bottle neck for IPS speed. I believe I have the option to leave the old router out of the equation and connect the first pod directly to my modem. Is that accurate? The 1st Pod will then operate as my primary router? Because I have a need to plug in four ethernet cables at the location of my first pod I plan on purchasing the "TP-Link 3-packDeco M5 Mesh with 5 port Switch". So I assume that I would connect the 1st Pod to the Modem and then use the second port on the 1st Pod to attach the 5 port Switch. Is that also correct?
Looks like I'm a little late to the party but I just purchased a mesh deco Dx20 and I'm a little stuck on whether I need to remove my current router/modem? I'm in Australia and have an NBN box connected and then a wifi hub into that. I'm trying to read about bridging but unsure if I even need to do that. Or....should I call an expert to come in and set this up. I definitely want to make use of the parental controls etc.
I don't have any experience outside the US with an NBN, it may be worth getting some advanced knowledge to make sure it is setup correctly to use the parental controls as it does require to be in router mode.
Two problems I may have with this Deco M5 is range (not to be mistaken with coverage) my garden shelter (Den) is 25m from my nearest building. That would require a 490m2^ coverage device but it is outside so what is the range outside? Second point, would my Host router Virgin HUB 3 WiFi still be used in the network? Many thanks for video very comprehensive.
25m could be doable if you have minimal surface interference. I would place them as close as you can to each-other. You can still use your Host router.
Great video, two questions I set up 2 Deco M5 units today. I was surprised that while the Deco app does have a password, that it did not require a password for my router. Could not someone whom has a Deco app on their phone tap into my Deco system with their phone? Next question regards Alexa, they say works with Alexa. Does Alexa receive its wi-fi signal from the Deco, do you have to tell Alexa to find the Deco in order for her to receive the wi-fi signal from the Deco? Thanks
You created an account when setting up the deco. It attaches your devices to that account. So someone won't be able to walk in and access your devices unless you gave them your login. For Alexa, you will need to add the skill and link the 2 together.
Quick question! Can I connect both the main pod and 2nd pod to the modem/router using ethernet cable? Also, what happens to the original SSID from my ISP? Would it be replaced by that of Deco's? Or will it just co-exist?
Thanks very much - Best tutorial, very helpful. I had two units that displayed a red LED. Had to reset both! Working now.. I'm saving this link for future ref..
im confused, so once the main deco is connected to wifi, do I still have to have the ethernet cable connected to it or can i bring it somewhere else and plug in the power source there. Great video btw
@@enchantking no, with Mesh setup you no longer use the router's Wifi, that is how it can give you the seamless experience. That is how all Mesh nodes works.
Hello again, one more question please. I plan to replace my existing deco mesh m5 home WiFi network with a newer X20 WiFi 6 deco mesh system in order to upgrade internet speed and function. What should I do? Just add new my new devices into my existing network? An then remove my old ones? Or something else? Thank you.
Very informative video! I have a not so big apartment but large enough that the furthest room from the router has very weak signal and sometimes looses the signal completely, that is why im considering this product. Since the main device will be cabled, unless i get a pretty long ethernet cable, for this to work i should have a minimum of 2 devices? Hope you can reply. Thanks and stay safe.
If I already have a TP-Link router, do I have to substitute the router's WIFI by this mesh WIFI or is there any configuration all the mesh devices can connect wirelessly to my primary router? The think is that my router does not have enough strength to send good wifi to my 2nd floor, are this devices have more power than the router?
I had a question, im about to buy the Deco m5 off of Amazon. does it have to run on Ethernet or can it be run wireless through wifi only like a range extender?
Hi there, just curious, is the setup in your video in router mode or access point mode? I have an existing router/modem (2 in 1) and i am planning to get the deco as well to solve my bad wifi. I am worried if the access point mode wouldn't be as good as the router mode. Great video btw!
hi so i have gigabit internet, i get 780mbps beside my router but in my bedroom i only get 20 mbps. If i get this will i get high speeds? or will i need another mesh system to utilize my gigabit broadband? thanks
Hey, great review! I have question about Qos. Can I disable some websites on Deco? For example, I don't want to allow using of UA-cam, can I disable it? Or can I limit the speed for some specific websites?
Great informational review. I have been looking for a mesh system, and like the others said, came across your video and sold me on the TP Link Deco M5. I will be purchasing this today, and will use your video to help me get started. You gained another subscriber ( Me ) today. Thans for sharing the info. Be safe
@@HelpCloud hi i have a camera system connected to my modem , i have the deco m5 which i bought cause i saw your videos which are very interesting where do i connect that ethernet cable if the first deco goes connected to the modem can you please explain thank you
Yes you can! But the catch is it requires one of your other units to broadcast it. So, 2 would have to be plugged in to the router, 1 would broadcast one SSID, the other other to broadcast the other SSID. The 3rd pod could be link to either to extend it.
First, thanks for the great review. Second, I already have a 3 piece Deco set up and want to get a 4 additional extender for our basment. What do I buy? Lol, thanks in advance.
I tried to connect my printer to the DECO unit. I can ping the printer but the printer will not print the document sent. What is the issue here. Your advice is much appreciated
Thanks for the video. Just wondering if you need to change any settings on current router to stop the WiFi from that? Will it interfere with the deco system?
Great video. Main deco configured without issue. The two satellites are flashing blue indicating need for setup. I thought they would simply connect to the main deco. Appreciate any ideas.
Great video...mine is on it's way. Just a quick question...my router has no spare ethernet port available at present, do I unplug one to connect the Deco and then plug the lead that was plugged into the router into the other ethernet port on the Deco?? Thanks in advance
great video. I would like to know if I can conncet the main hub directly to ISP provided modem/ router or does it have to be a stand alone modem? thanks.
@@HelpCloud I'm still not sure about your answer to Nick's question. Do I shut off my ISP's router/modem by unpluging it's power source ? If so with no power how does the modem part continue to function ?
Hi great review but I do have a question that nobody seems to ask! I have a 9 deco system comprising of M4 & M5s. My Main Deco ( M5) Ethernet connected to router but it seems that most of the other decos are connecting to the Main even though there are several much closer and with a better signal? I know on the App somewhere there was a setting to toggle Auto on or off and when turned off you could tell a particular deco to connect to one of your choice ie closer or better signal. But can’t seem to find it again? Please help! Thanks once again for a informative video.
Very good review. Can I ask a question? Is it possible to connect primary deco to secondary via ethernet cable? and then from second to third deco also via ethernet? Thank you so much for answer.
@@wisemage0 Okay one more question each deco got only two ethernet ports, so I can't connect all three by wire, correct? Connect from modem to primary deco and then from primary deco the next two also by wire.
Correct me if I am wrong here. I place 1 deco next to my wireless router that has trouble reaching into the farthest room in the house. I place the 2nd deco in the problem room. How is that going to solve the issue? Whatever is blocking my routers wifi will now block the deco's wifi? Or do the decos talk to each other using the electric wiring in the house.
Deco 1 is WIRED to your router. Deco 2 and/or Deco 3 talked to the others via wireless to create a mesh like wifi structure. You will need to place the Decos as far as you can but still maintain a good signal strength.
I just got mine today, I just want to confirm something with it. Maybe you can help? Is it a must to have 1 connected wired and the rest wireless? I actually have a different modem router combo and it only has 1 Lan port working and I use it for work. Can I just use the Mesh as a wifi extender of some sort instead?
Great review! New sub. Introduced to this system a bit late via Primus internet. Thank you for describing the parental features...everything you shared convinced me to buy more pods. Would you still recommend the same model as of April 2023? Or is there a newer model you'd recommend? We also have a TPlink Archer 10 router. To be clear, is the Deco M5 system meant to fully replace this router...if we want to take advantage of parental controls in the app? Thank you:)
Hi, i have a modem/router with 4 ethernet ports (pc, xbox, tv are plugged in) one is free. Can i still use a deco (for better wifi) without any change to my cable plugged devices in router/modem?
I only have the main mesh. I'm planning to use long lan cable maybe about 20 meters so that I can put the main mesh between the main router and my bed room. Is my set up good or it is not ok to use long cables for the extender... Thank you...
With this deco I have a modem/router combo. Will this still work and if so would the wifi I used to be on that is with the modem/router would that be still working? When I make the account and set up the wifi name and password what happens to the wifi that I used to be on?
When you disable the router wifi it still has ethernet --right? Ethernet still goes to the router ports and to the Deco. The Deco wifi takes over and you just don't use the router's wifi. @@HelpCloud
Does it make sense that I now have 3 networks? My modem gives me a 2.4G and 5G network, and now I have my Deco network. Should I pick and choose what devices connect to which? Or do I need to name my Deco SSID to copy my modems network?
Thanks for the great review. One question about network setup - if I connect the main deco to the ROUTER and there are other devices ( like printer and another PC that runs media server) connected via LAN to the router, will I have 1 SINGLE network if I configure deco to run in Access Point mode? Will I have access to the wired connected printer from wirelessly connected device ? Are they both in the same network ?
Question: I have roughly 40 devices (Computer, phone, TVs, smart lights and assistants) connected to my current modem/router, give or take. Would this cause any problems like dropped internet because too many things are connected? I saw on the Amazon page they can have about 100 devices attached. Very informative video, if this can still work with all the smart devices and everything else I have, then I am getting this.
You bet! They do make a Wifi 6 version in the Deco system that is deigned for IoT(Internet of Things) and congestion, may be worth investing a bit more. I would try this system out, if it fails for that reason, send it back and snag the upgraded version.
For that speedtest, was the other node only connected wirelessly to the main node? If not, how was the speed difference between the main node and other node (wireless backhaul)?
Only the main node was wired, the other 2 are wirelessly connected to the main node. I don't have exact numbers however the download has been great regardless of which node I am connected to.
Deco M9 with tri-band or deco x20 with wifi 6. We have one device capable of wifi 6 everything else is 5. Wondering about speed/throughput/ capability while handling smart TVs and three xboxs? We are running the AX 1500 right now and while the 5ghz is awesome, the 2.4 is terrible and really bad range. I have to utilize and extended just 20 feet from the router to get a better reception. 1700 sq ft single story cheaper home too. Nothing drastic. Our ac1200 broadcasted way better but was slower within range. Just wondering what you’d do, M9 or deco with wifi6? Thanks and great video!
Wifi 6 is best for smarthome with lot of congestion. I have the M5(Wifi 5) with a tons of smarthome devices setup and it does very well. The Deco M9 should work well.
@@HelpCloud thanks for the reply. We don’t have many smart items. Just our TVs, cell phones, gaming consoles, kindles. I think I’ll lean on the tried and true M9 and wait for a decently priced 6 with tri-band. Though, tp-link did just release the x68 but I’ve learned not to buy anything new from them after this ax1500.
may i asked... Did I always need to connect it to the modem by network cable after setup? If yes, then I should buy a cable or can it connect thru wifi after?
It will depend on your setup. I currently run mine in AP mode and let my router assign the IPs. If this mode is selected, you do lose features like parental controls.
Hi nice video. i am planing to buy deco which will be located near my router. and i have tplink wifi6 range extender AX1500 will that connect with each other ? and advice
Great video!...how far can I install the main and the slave deco each other. I have a large yard and thinking to install one near the end(indoor of course).
If i want to set this as an extender for my upper rooms, i need to configure it as AP mode? And to setup i still need to use LAN cable connected to exiating router? Tq
What if you wifi network is called I.e. funhouse5G I saw you named the deco network to something. That means my devices will be connecting to different network names in my house?? Or can I can the decos the same as my network. Kinda like a router? Thanks!
Hey nice tutorial, off subject what are the machine specs of the machine behind you. Do you have a build tutorail on it can I get the parts list if you dont have a build video looks great.
At the time of this video, it was a AMD 3900x, 64 GB Ram, 5900XT Thicc 3 Card and a variety of m.2 drives in a Corsair 4000x case. The card has since been replaced with a Nvidia 2080 Super FTW.
Great explanation. I'm looking to purchasing this as my wifi is awful. By adding the Decos, will I see another wifi network in addition to my existing one? Or would I have to try to put my modem to bridge mode to not see the existing wifi? The wifi signal on the modem is awful. Thanks.
What I would do is disable the wifi network from your modem/router. Set this up and you will have 1 SSID(Wifi Name) for roaming and 2.4/5ghz network. The connected device will auto swap between 2.4 or 5ghz and to the closest node for best connection.
What speeds to you get from you provider? I am wondering how much speed is lost when you use the mesh system? ie if you pay for 150 Mbps and get 100 Mbps with the mesh system. How much speed is lost when using the system?
@@HelpCloud thanks for the quick reply! So what is your speeds, exactly (1000 mbps? 800 mbps?) coming in from your ISP and what speeds do you get with the routers? I am wondering what percentage of your speed is lost when you use your system (10% loss, 40% loss?)? Thanks for your help :) I have 500 mbps download and about 10 upload and want to know, with my numbers, about how well these systems will translate my speeds across my home :)
It depends on the time, on average I see about 900 up/down at any given moment. Through the deco app speed test I am seeing 600 down and 900 up on my Samsung Phone. Your speed may vary with certain wall types, and general interference from other wireless networks from neighbors etc. With a 500 down and 10 up, I would bet you would get full speeds or close to it.
Great review! I do have problems with my Deco setup. The other Deco connects to the main Deco however when im near the secondary Deco it doesn't provide internet connection. Does it mean my secondary Deco is broken?
looks like we have to sacrifice one device judging by the comments down below, it is fine though but kinda...eh. So yeah looks like one needs to be hooked up...
Does one of the Deco M5 devices need to remain connected to either the Modem or Router? I have a TP Link AC1750 Router connected to my modem in my basement. I get very poor signal upstairs. Can I not just get 1 Deco M5 device, place it upstairs and connect via wifi to extend my routers signal? Do I have to have two instead? One downstairs wired to the router, and the other upstairs to boost the signal?
Wifi mesh are great at dead spot but my problem is the other Decos are not as good as the main Deco. The internet speed is cut by half. Is there a way to connect other decos via ethernet and have all decos the same internet speed? e.g. 100 Mbps
Hi, i have a question, based on your video, even if i have a modem and router, its alright to skip the steps when it ask to turn off the modem and router?
Nice video , very informative! Keep it up 😊 I have a question if you can answer me . I bought a deco today and the guy at the store told me that it works like access point. But it only works when it’s connected to my modem/rooter via Ethernet. I want to put it to another room .. Do I have to buy a second deco device? Thanks you in advance 🙏🏻
Will this improve my connection to my ps5? Currently have 100mbps plan but my ps5 is only getting 50mbps download, 10mbps upload.. using wired connection
Hey thanks for the vid - one question pls .. if we connect the main or first one to the modem/router can we extend the remaining 2 of them as wired extensions instead of WiFi ? (Was looking to get a total of 4 of them for the entire house) Thanks in advance
Yes, although it will need to be in access point mode, in AP mode, you will lose the extra features like parental controls, pausing devices etc. www.tp-link.com/us/support/faq/1794/
Just got the M5 today. Was setting it up when I came across your video. Appreciate the info and have a question. My router gives me 2 WiFi names, 1 which is 2.4g and the other which is 5G. While I am in the setup process can I select the 5G wifi name and move ahead.
One of my deco has an issue, no matter how many times I factory reset the faulty one whenever I set it up it only has 5ghz connection. I checked if my connection's only 5 ghz but 2.4 ghz and 5 ghz are both on. I turned off the 5 ghz connection then tried to setup the faulty one then I couldn't set it up. Hope you could help.
I purchased it today and I think this is an awesome device. I used to have disconnection issues with the modem provided by my ISP even if it's just right in front of me. The deco m5 solved this problem. I can now play without any delays or disconnections.
It is a fantastic system and I highly encourage people that are having issues to snag something like it.
So can I connect my fiber cable directly into it ? Or do I need a router for it ? Could you please help?
@@nannypannyy you will need to hook it up to the modem the rest can be configured using the app.
I have to say I purchased a Deco M5 today and came across your review. This was a lot better than pretty much any review I’ve watched on here and quality and editing was spot on.
Keep it up!
Great to hear! Thanks for the feedback!
How do you like the M5?
i have been using the M5 for about 3 years now. still working awesome. easy to setup and ultra reliable. Never have a issue.
Question, If I connect the 2nd Deco while it's in the same room as the primary one and after the 2nd one is connected, Can i unplug it and take it upstairs and downstairs and connect it there? Will the two deco still be paired or will it lose connection and I'll have to connect them again when it's upstairs/downstairs.
@@asif8440 yes. it will reconnect to the deco system once you setup initially.
Definitely the best review of this unit I've seen. I can see you're a serious PC user too from the great custom build in the background. Top notch mate! Thank you.
I appreciate it, I love my games haha!
Just got a Deco M5 system, and reading the info from TP Support, Viewing other Vids, and scanning help Forums I was dreading setting this up (my tech knowledge is limited) until i came across your video. You knocked in in to a tin hat, plain and simple, and easy to follow. I feel more confident in giving this ago myself. So thank you and keep up the good work.
Gread tutorial. I have set up several of these systems so just letting those know, if you have devices such as computers/printers connected to the LAN ports on your current Modem/Router and want to keep your existing DHCP server from your current router assigning the same IP range so all devices 'talk' on the network - make sure you swap over to Access Point mode after setting up. Keeping it in Router mode means the Deco will assign new IP addresses on the new WiFi system to that of the current modem/router you already have and they won't 'talk' to each other.
Correct! Like stated in the video, when you do swap over to Access point mode, you do lose the parental control features.
When you put it in access point mode, do you use the old Wi-Fi or the new Deco Wi-Fi?
Best review I've seen yet! Thanks man, I can't wait to try this thing out.
After I installed this system yesterday night and connected my series X it encountered a error saying I had double NAT. But from watching this Im sure I have the answer to my problem. I will change the settings from router to access point.
Hello.I'm glad that there is someone here with the lights on. I bought an M5 and followed instructions. M5 connected to a port on my TP Link router. Your instructions are perfect and its running.
Download speed test to my Android phone on wifi was 150mbps.....to my wife's Gateway laptop in another room with an M5 pod nearby was 100mbps download. We have Xfinity 1Gb internet. Wired computers get 900mbps download and 40mbps Upload. I'll take a W A G that if the M5 was connected to a MODEM that the real hi speed happens. I need a router for the setups of static addresses and ports I need opened to connect to servers over the interwebs...and ports opened for Xbox happiness...thanks
I consider buying this system. Just a question about setting up an additional pod. Does the location of the additional pod require a minimum internet speed at that location? If so, how do I know what it is?
Thanks so much for input on these devices. I was starting the process of ordering Deco M5s for my situation. I contacted TP Link to have them give me input and information to confirm my application and selection.
This is my situation. I have a installation needing 3 devices. The base and a 2nd Deco some 30 ft apart in the main house (only 1 floor) and a 3rd Deco in my external shop which ii is about 100ft from the house. I currently use a wifi extender to provide wifi in the shop.
After much discussion with TP Link support they would not recommend their product more than 50 ft from the main house. I told them I was testing this configuration with another supplier's equipment and it was connecting. Thus I don't see how to proceed with TP Link. I really wanted to use the Deco M5 devices.
My question is do you see my configuration as not applicable for setting up 3 Deco M5s because of the 100ft distance of the third Deco ? Also I plan to setup my mesh in access point mode as I want to keep my modem/router configuration in service.
Your input si greatly appreciated. Thanks.
Thanks Alot, just impressed my BOSS after configuring his Deco Router i think i might get a promotion
Great to hear! Good luck!
Can I connect the pods to one another via ether et? I'm not sure if I will be able to get a wireless signal. I've already got the cable prerun.
Worked great. I can even fly my drone outside.
Great 👍!
Hey there. After setting up the 1st deco, can you move it to another spot away from the modem/router? Or it should always be connected to the modem/router as you showed in the initial setup??
It seems the videos I watched on the M5 have all setup the first pod with an existing router. I have an older Linksys 2500 router that I am reluctant to use as I think it may be a bottle neck for IPS speed. I believe I have the option to leave the old router out of the equation and connect the first pod directly to my modem. Is that accurate? The 1st Pod will then operate as my primary router?
Because I have a need to plug in four ethernet cables at the location of my first pod I plan on purchasing the "TP-Link 3-packDeco M5 Mesh with 5 port Switch". So I assume that I would connect the 1st Pod to the Modem and then use the second port on the 1st Pod to attach the 5 port Switch. Is that also correct?
great review! very helpful and now I know what to expect tomorrow when my m5’s arrive.. thanks!!
Glad I could help!
does the master deco needs to be kept connected to the modem via Lan cable, or is it only during the setting up in the beginning?
Looks like I'm a little late to the party but I just purchased a mesh deco Dx20 and I'm a little stuck on whether I need to remove my current router/modem? I'm in Australia and have an NBN box connected and then a wifi hub into that. I'm trying to read about bridging but unsure if I even need to do that. Or....should I call an expert to come in and set this up. I definitely want to make use of the parental controls etc.
I don't have any experience outside the US with an NBN, it may be worth getting some advanced knowledge to make sure it is setup correctly to use the parental controls as it does require to be in router mode.
Two problems I may have with this Deco M5 is range (not to be mistaken with coverage) my garden shelter (Den) is 25m from my nearest building. That would require a 490m2^ coverage device but it is outside so what is the range outside?
Second point, would my Host router Virgin HUB 3 WiFi still be used in the network?
Many thanks for video very comprehensive.
25m could be doable if you have minimal surface interference. I would place them as close as you can to each-other. You can still use your Host router.
Great video, two questions I set up 2 Deco M5 units today. I was surprised that while the Deco app does have a password, that it did not require a password for my router. Could not someone whom has a Deco app on their phone tap into my Deco system with their phone? Next question regards Alexa, they say works with Alexa. Does Alexa receive its wi-fi signal from the Deco, do you have to tell Alexa to find the Deco in order for her to receive the wi-fi signal from the Deco? Thanks
You created an account when setting up the deco. It attaches your devices to that account. So someone won't be able to walk in and access your devices unless you gave them your login. For Alexa, you will need to add the skill and link the 2 together.
Quick question! Can I connect both the main pod and 2nd pod to the modem/router using ethernet cable?
Also, what happens to the original SSID from my ISP? Would it be replaced by that of Deco's? Or will it just co-exist?
You can plug each one in with the ethernet cable if you see fit. As far as your other wifi, they will co-exist if you choose to not disable it.
Great video !!! Is the M5 still worth buying in 2024 please?
Also can I mix a Deco Wifi 5 with Deco wifi 6 ?
Best Deco M5 review ever!
I have 6 deco m5
2 set of 3
Can I connect all device same deco?
Means... 1 Deco through LAN and another 5 using wifi???
Great video and gave me all the steps to add another node to my setup. Thank you SO MUCH!
You're welcome!
Thanks very much - Best tutorial, very helpful. I had two units that displayed a red LED. Had to reset both! Working now.. I'm saving this link for future ref..
You're welcome!
im confused, so once the main deco is connected to wifi, do I still have to have the ethernet cable connected to it or can i bring it somewhere else and plug in the power source there. Great video btw
The main deco is connected to the Ethernet cable, the other 2 decos are connected via wifi to the main deco.
@@HelpCloud can you not connect the main deco through wifi instead?
@@enchantking no, with Mesh setup you no longer use the router's Wifi, that is how it can give you the seamless experience. That is how all Mesh nodes works.
You can use the internet from your phone and connect to other devices in your house through the mesh?
Hello again, one more question please. I plan to replace my existing deco mesh m5 home WiFi network with a newer X20 WiFi 6 deco mesh system in order to upgrade internet speed and function. What should I do? Just add new my new devices into my existing network? An then remove my old ones? Or something else? Thank you.
You can setup the new system with the same info and all the devices should just connect.
Very informative video! I have a not so big apartment but large enough that the furthest room from the router has very weak signal and sometimes looses the signal completely, that is why im considering this product.
Since the main device will be cabled, unless i get a pretty long ethernet cable, for this to work i should have a minimum of 2 devices?
Hope you can reply. Thanks and stay safe.
Yes, you will need at least a 2 pod system.
If I already have a TP-Link router, do I have to substitute the router's WIFI by this mesh WIFI or is there any configuration all the mesh devices can connect wirelessly to my primary router? The think is that my router does not have enough strength to send good wifi to my 2nd floor, are this devices have more power than the router?
The Deco system can be its own router. You can disable your main routers wifi and use the deco system.
I had a question, im about to buy the Deco m5 off of Amazon. does it have to run on Ethernet or can it be run wireless through wifi only like a range extender?
Hi there, just curious, is the setup in your video in router mode or access point mode? I have an existing router/modem (2 in 1) and i am planning to get the deco as well to solve my bad wifi. I am worried if the access point mode wouldn't be as good as the router mode. Great video btw!
The is in the default router mode. I used both modes and saw no difference in WiFi covereage!
hi so i have gigabit internet, i get 780mbps beside my router but in my bedroom i only get 20 mbps. If i get this will i get high speeds? or will i need another mesh system to utilize my gigabit broadband? thanks
I have a gigabit connection as well, this one won't get you the full bandwidth but I am able to get around 700mbps on my wireless devices.
@@HelpCloud Right thats perfect thanks
@@HelpCloud How much do you get normally from gigabit? How much speed is lost?
Hey, great review! I have question about Qos. Can I disable some websites on Deco? For example, I don't want to allow using of UA-cam, can I disable it? Or can I limit the speed for some specific websites?
This point you in the right direction
www.tp-link.com/us/support/faq/1598/
Sadly its not working anymore after the firmware update. I blocked tiktok using the add website function but in some kind of bugged, it disappeared!
Great informational review. I have been looking for a mesh system, and like the others said, came across your video and sold me on the TP Link Deco M5. I will be purchasing this today, and will use your video to help me get started. You gained another subscriber ( Me ) today. Thans for sharing the info. Be safe
Glad it was helpful! Appreciate the support, let me know if I can answer any other questions!
@@HelpCloud ok will do 👍
@@HelpCloud hi i have a camera system connected to my modem , i have the deco m5 which i bought cause i saw your videos which are very interesting where do i connect that ethernet cable if the first deco goes connected to the modem can you please explain thank you
Great video. One question, if I use access point mode can I create another SSID and password? Thx
Yes you can! But the catch is it requires one of your other units to broadcast it. So, 2 would have to be plugged in to the router, 1 would broadcast one SSID, the other other to broadcast the other SSID. The 3rd pod could be link to either to extend it.
First, thanks for the great review.
Second, I already have a 3 piece Deco set up and want to get a 4 additional extender for our basment. What do I buy? Lol, thanks in advance.
You can buy the deco individually. How large is the basement? You may only need a couple more.
@@HelpCloud Thanks. only a few hundred sq ft. Just got one and ready to set up. thanks!
hi. instead of connecting them Wireless, can I connect each deco via LAN????
I tried to connect my printer to the DECO unit. I can ping the printer but the printer will not print the document sent. What is the issue here. Your advice is much appreciated
Thanks for the video. Just wondering if you need to change any settings on current router to stop the WiFi from that? Will it interfere with the deco system?
It will not!
Great video. Main deco configured without issue. The two satellites are flashing blue indicating need for setup. I thought they would simply connect to the main deco. Appreciate any ideas.
You need to go into the app and "Add the decos" this is demonstrated in the video. Let me know how it goes.
is it possible to connect a deco unit to another via wire?
Great video...mine is on it's way. Just a quick question...my router has no spare ethernet port available at present, do I unplug one to connect the Deco and then plug the lead that was plugged into the router into the other ethernet port on the Deco?? Thanks in advance
Yes, you will need a free ethernet port on your router.
Amazing review mate thx❤
great video. I would like to know if I can conncet the main hub directly to ISP provided modem/ router or does it have to be a stand alone modem? thanks.
Yes, I have mine connected to my router then I shut off my main routers Wi-Fi and running everything through the Deco.
@@HelpCloud I'm still not sure about your answer to Nick's question. Do I shut off my ISP's router/modem by unpluging it's power source ? If so with no power how does the modem part continue to function ?
Hi great review but I do have a question that nobody seems to ask! I have a 9 deco system comprising of M4 & M5s.
My Main Deco ( M5) Ethernet connected to router but it seems that most of the other decos are connecting to the Main even though there are several much closer and with a better signal? I know on the App somewhere there was a setting to toggle Auto on or off and when turned off you could tell a particular deco to connect to one of your choice ie closer or better signal. But can’t seem to find it again? Please help! Thanks once again for a informative video.
Very good review. Can I ask a question? Is it possible to connect primary deco to secondary via ethernet cable? and then from second to third deco also via ethernet? Thank you so much for answer.
Secondary decos only connect to the primary deco.
Meaning that you can add multiple ones in _different directions;_ but you can't daisy chain them.
@@wisemage0 Okay one more question each deco got only two ethernet ports, so I can't connect all three by wire, correct? Connect from modem to primary deco and then from primary deco the next two also by wire.
Correct me if I am wrong here. I place 1 deco next to my wireless router that has trouble reaching into the farthest room in the house. I place the 2nd deco in the problem room. How is that going to solve the issue? Whatever is blocking my routers wifi will now block the deco's wifi? Or do the decos talk to each other using the electric wiring in the house.
Deco 1 is WIRED to your router. Deco 2 and/or Deco 3 talked to the others via wireless to create a mesh like wifi structure. You will need to place the Decos as far as you can but still maintain a good signal strength.
Awesome review! Bought 2 and works perfectly! Cheers
Great to hear!!
I just got mine today, I just want to confirm something with it. Maybe you can help? Is it a must to have 1 connected wired and the rest wireless? I actually have a different modem router combo and it only has 1 Lan port working and I use it for work. Can I just use the Mesh as a wifi extender of some sort instead?
The first does have to be wired.
Thank you, Great review. I'm strongly considering this system and appreciate the info you provided.
Glad it was helpful!
Great review! New sub. Introduced to this system a bit late via Primus internet. Thank you for describing the parental features...everything you shared convinced me to buy more pods. Would you still recommend the same model as of April 2023? Or is there a newer model you'd recommend? We also have a TPlink Archer 10 router. To be clear, is the Deco M5 system meant to fully replace this router...if we want to take advantage of parental controls in the app? Thank you:)
Hi, i have a modem/router with 4 ethernet ports (pc, xbox, tv are plugged in) one is free. Can i still use a deco (for better wifi) without any change to my cable plugged devices in router/modem?
Yes!
I only have the main mesh. I'm planning to use long lan cable maybe about 20 meters so that I can put the main mesh between the main router and my bed room. Is my set up good or it is not ok to use long cables for the extender... Thank you...
That will work just fine!
Will this reduce my internet bandwidth by half? Thanks..
With this deco I have a modem/router combo. Will this still work and if so would the wifi I used to be on that is with the modem/router would that be still working? When I make the account and set up the wifi name and password what happens to the wifi that I used to be on?
Yes you can still use one of these. You can leave the wifi on the router on or disable like I have done.
When you disable the router wifi it still has ethernet --right? Ethernet still goes to the router ports and to the Deco. The Deco wifi takes over and you just don't use the router's wifi. @@HelpCloud
Does it make sense that I now have 3 networks? My modem gives me a 2.4G and 5G network, and now I have my Deco network.
Should I pick and choose what devices connect to which? Or do I need to name my Deco SSID to copy my modems network?
It does, I too had this and shut off my networks broadcast from my modem.
@@HelpCloud should I shut off modem network completely or put it in bridge mode?
Finally best tutorial ever great job bro
Appreciate it! Thanks for watching and commenting.
Thanks for the great review. One question about network setup - if I connect the main deco to the ROUTER and there are other devices ( like printer and another PC that runs media server) connected via LAN to the router, will I have 1 SINGLE network if I configure deco to run in Access Point mode? Will I have access to the wired connected printer from wirelessly connected device ? Are they both in the same network ?
You will need to run AP mode, otherwise the deco will assign out IPs and the printer/pcs won't be able to "talk" with each other.
@@HelpCloud thanks. If I run in AP mode, will all my wirelesly AND wired (to the router!!! ) connected devices be in the same network?
I just got these today should I turn off the WiFi on my router? Or will they not clash together?
I would turn it off to reduce interference but you can have them both on too.
Question: I have roughly 40 devices (Computer, phone, TVs, smart lights and assistants) connected to my current modem/router, give or take. Would this cause any problems like dropped internet because too many things are connected? I saw on the Amazon page they can have about 100 devices attached. Very informative video, if this can still work with all the smart devices and everything else I have, then I am getting this.
I have roughly the same amount of devices and it has worked very well.
@@HelpCloud Good to know, thank you very much.
You bet! They do make a Wifi 6 version in the Deco system that is deigned for IoT(Internet of Things) and congestion, may be worth investing a bit more. I would try this system out, if it fails for that reason, send it back and snag the upgraded version.
For that speedtest, was the other node only connected wirelessly to the main node? If not, how was the speed difference between the main node and other node (wireless backhaul)?
Only the main node was wired, the other 2 are wirelessly connected to the main node. I don't have exact numbers however the download has been great regardless of which node I am connected to.
Deco M9 with tri-band or deco x20 with wifi 6. We have one device capable of wifi 6 everything else is 5. Wondering about speed/throughput/ capability while handling smart TVs and three xboxs? We are running the AX 1500 right now and while the 5ghz is awesome, the 2.4 is terrible and really bad range. I have to utilize and extended just 20 feet from the router to get a better reception. 1700 sq ft single story cheaper home too. Nothing drastic. Our ac1200 broadcasted way better but was slower within range.
Just wondering what you’d do, M9 or deco with wifi6? Thanks and great video!
Wifi 6 is best for smarthome with lot of congestion. I have the M5(Wifi 5) with a tons of smarthome devices setup and it does very well. The Deco M9 should work well.
@@HelpCloud thanks for the reply. We don’t have many smart items. Just our TVs, cell phones, gaming consoles, kindles. I think I’ll lean on the tried and true M9 and wait for a decently priced 6 with tri-band. Though, tp-link did just release the x68 but I’ve learned not to buy anything new from them after this ax1500.
may i asked... Did I always need to connect it to the modem by network cable after setup? If yes, then I should buy a cable or can it connect thru wifi after?
The main(first) pod has to remain connected to the router/modem.
Thanks for the video! But I have a question, which is better AP mode or router?
It will depend on your setup. I currently run mine in AP mode and let my router assign the IPs. If this mode is selected, you do lose features like parental controls.
Hi nice video. i am planing to buy deco which will be located near my router. and i have tplink wifi6 range extender AX1500 will that connect with each other ? and advice
Yes it will!
Great video!...how far can I install the main and the slave deco each other. I have a large yard and thinking to install one near the end(indoor of course).
That is something you will need to test as your environment will yield different results from mine due to different walls/interferences.
If i want to set this as an extender for my upper rooms, i need to configure it as AP mode? And to setup i still need to use LAN cable connected to exiating router? Tq
You can leave as router mode, 1 pod connected to the router and the other 2 pods in their respective rooms.
What if you wifi network is called I.e. funhouse5G
I saw you named the deco network to something. That means my devices will be connecting to different network names in my house??
Or can I can the decos the same as my network. Kinda like a router?
Thanks!
When setting this up, you can choose the same name or choose a different name to use for the wifi network.
Do i have to setup an ethernet cable for this? Im thinking of plainly just do it wireless, or is that redundant?
The first pod will need to be wired, the other 2 are wireless.
Can you move the original deco or does that one have to stay connected to the Router
Hey nice tutorial, off subject what are the machine specs of the machine behind you. Do you have a build tutorail on it can I get the parts list if you dont have a build video looks great.
At the time of this video, it was a AMD 3900x, 64 GB Ram, 5900XT Thicc 3 Card and a variety of m.2 drives in a Corsair 4000x case. The card has since been replaced with a Nvidia 2080 Super FTW.
Great explanation. I'm looking to purchasing this as my wifi is awful. By adding the Decos, will I see another wifi network in addition to my existing one? Or would I have to try to put my modem to bridge mode to not see the existing wifi? The wifi signal on the modem is awful. Thanks.
What I would do is disable the wifi network from your modem/router. Set this up and you will have 1 SSID(Wifi Name) for roaming and 2.4/5ghz network. The connected device will auto swap between 2.4 or 5ghz and to the closest node for best connection.
@@HelpCloud Hey I would like to dp this but my system has both a modem & router in - and I am unable to disable the network
What speeds to you get from you provider? I am wondering how much speed is lost when you use the mesh system? ie if you pay for 150 Mbps and get 100 Mbps with the mesh system. How much speed is lost when using the system?
I have a Gigabit connection. Speed loss can be determined by many factors.
@@HelpCloud thanks for the quick reply! So what is your speeds, exactly (1000 mbps? 800 mbps?) coming in from your ISP and what speeds do you get with the routers? I am wondering what percentage of your speed is lost when you use your system (10% loss, 40% loss?)?
Thanks for your help :) I have 500 mbps download and about 10 upload and want to know, with my numbers, about how well these systems will translate my speeds across my home :)
It depends on the time, on average I see about 900 up/down at any given moment. Through the deco app speed test I am seeing 600 down and 900 up on my Samsung Phone. Your speed may vary with certain wall types, and general interference from other wireless networks from neighbors etc. With a 500 down and 10 up, I would bet you would get full speeds or close to it.
I appreciate the review. It looks easy, do you have to have a router? My router has a static id address and I don't know how to set this up...
My T-Mobile gateway modem has a built in battery that is not removable - What do I do now?
I have the 4 3 pc we had a service outage and i had to factory reset mesh now i cant add the other 2,pieces .... any ideas?
Brilliant review and walkthrough!
Thank you!
Great review! I do have problems with my Deco setup. The other Deco connects to the main Deco however when im near the secondary Deco it doesn't provide internet connection. Does it mean my secondary Deco is broken?
Even if I'm near to the secondary Deco, I cant connect to it. I'm always connected to the main deco.
I would reset and re-setup the 2nd deco pod.
Hi there, will the first unit that is connected via Ethernet cable would remain hooked up?
I was wondering this issue too, I hope he reply to this
looks like we have to sacrifice one device judging by the comments down below, it is fine though but kinda...eh. So yeah looks like one needs to be hooked up...
Yes the first Deco has to remain hard wired to your router/modem. This ensures a reliable connection when the other Decos are paired.
Thanks you convinced me to buy and subscribe.
You will like it alot. I haven't had any issues with it. Thanks for the sub!
Can you wire all 3 units?
Does one of the Deco M5 devices need to remain connected to either the Modem or Router? I have a TP Link AC1750 Router connected to my modem in my basement. I get very poor signal upstairs. Can I not just get 1 Deco M5 device, place it upstairs and connect via wifi to extend my routers signal? Do I have to have two instead? One downstairs wired to the router, and the other upstairs to boost the signal?
One of them does need to remain connected via hardwired. For that scenario, you will need at least a 2 pod system.
@@HelpCloud thank you for the response!
You bet!
Wifi mesh are great at dead spot but my problem is the other Decos are not as good as the main Deco. The internet speed is cut by half. Is there a way to connect other decos via ethernet and have all decos the same internet speed? e.g. 100 Mbps
Yes, you can connect the other decos with ethernet as well.
Can you setup VLAN on all the deco's? or just the M5? I can't see the option under "advanced" for the model Deco i'm looking at which isn't the M5
I am not sure, what Deco system are you looking into?
You plug it into the modem, then select i don't have a modem? I consider myself a fairly advanced user but have no idea what you mean by that.
Correct, once you click " I don't have a modem", you will see the next steps.
Does the first deco always have to be connected to the router with the Ethernet cable or can you move the first deco about ? Brilliant review btw!
Yes it does, that is what creates the solid foundation for the mesh system.
Great video, very informative. 👍🏼
Glad it was helpful!
Hi, i have a question, based on your video, even if i have a modem and router, its alright to skip the steps when it ask to turn off the modem and router?
Yup! That is how mine is setup.
Nice video , very informative! Keep it up 😊
I have a question if you can answer me . I bought a deco today and the guy at the store told me that it works like access point. But it only works when it’s connected to my modem/rooter via Ethernet. I want to put it to another room .. Do I have to buy a second deco device?
Thanks you in advance 🙏🏻
For AP mode, you will need an ethernet cable from the router/modem to the pod. Then go into the app and set to access point mode.
Will this improve my connection to my ps5? Currently have 100mbps plan but my ps5 is only getting 50mbps download, 10mbps upload.. using wired connection
If you are wired, you are most likely getting the best you can.
Is there any advantage in connecting to the existing WiFi router over the modem?
I haven't seen a difference on mine, however that will depend on your router and it's specs.
Thank you - just set up using your video
Fantastic!!
So would i have to connect it to my modem with the ethernet or can i just connect it to my router. Also i am on spectrum would this still work?
Do you have anything plugged into the router?
@@HelpCloud just an ethernet cable connected to my playstation but i will be unplugging it
@@HelpCloud also an ethernet connected to our security camera
can i install this deco even though i already have an existing secondary router?
Yes you can, I would plug it into the main router.
Hey thanks for the vid - one question pls .. if we connect the main or first one to the modem/router can we extend the remaining 2 of them as wired extensions instead of WiFi ? (Was looking to get a total of 4 of them for the entire house) Thanks in advance
Yes, although it will need to be in access point mode, in AP mode, you will lose the extra features like parental controls, pausing devices etc.
www.tp-link.com/us/support/faq/1794/
I have a Deco W2400, I have tried everything but can't get it to connect to my Wi-Fi, please help
Just got the M5 today. Was setting it up when I came across your video. Appreciate the info and have a question.
My router gives me 2 WiFi names, 1 which is 2.4g and the other which is 5G. While I am in the setup process can I select the 5G wifi name and move ahead.
The Deco M5 will combine 2.5Ghz and 5Ghz networks into a single SSID. Devices that support a 5Ghz connection will auto connect to that band.
One of my deco has an issue, no matter how many times I factory reset the faulty one whenever I set it up it only has 5ghz connection. I checked if my connection's only 5 ghz but 2.4 ghz and 5 ghz are both on. I turned off the 5 ghz connection then tried to setup the faulty one then I couldn't set it up. Hope you could help.
If you still can send it back I would. Sounds like a defective unit.