What about band confusion ? ie having both types, I know they are supposed to have channel hopping capability, is that an issue adding a mesh and a standard in the same room ? Thanks for the vid info...
@TechOdyssey question, I live in a 2br apartment 1 floor, about 900-1000sq ft of size of the apartment. I stream for my TV and I have been doing some speed test for my internet. I found that I have better download speeds on WiFi than hardwired using my Android TV box. I only have about 6 devices connected to my wifi and I'm also using my ISP router which is not the greatest. My router is located in my living room and my streaming devices are in my bedroom which is roughly about 10-15ft away from the router. Would you recommend the TP link router for the best solution?
TP Link mesh setup has been a game changer. Old pre war house, not big but built like a tank. without the mesh only 1 floor had reliable internet. Now full coverage.
@@roarrrist It works but the router and extender placement matters. If the further device signal isn't weak enough it won't switch to the closer extender. But mostly the system does what I need.
@@roarrrist Deco setup requires that you use a tp-link cloud account to configure. OneMesh devices can be configured from the web portal on the device.
We just had fiber put in and they came and installed the modem today. We bought the TP-Link - Archer AXE7800 Tri-Band Wi-Fi 6E Router and set it up. Was super easy and OMG the speeds are so much faster than our old coaxial internet and modem/router setup. We're getting about 250 Mbps down and 250 Mbps up! Thanks for the tip on pointing the antennas. I adjusted them to point towards the areas of the house we typically use WiFi. I checked the signal strength on all three floors- it's 100% on the middle floor with the router and about 90% on the second floor and about 80% in the basement rooms on the 5 GHz channel. On the 2.4 GHZ it's 100% throughout the entire house. I haven't tested the 6G yet.
@@mykylc Correct, besides two blueish white lights denoting connectivity (two solid lights meaning connected status) there are none. I haven't found the lack of status lights to be an issue.
@@squaddingquadsI noticed that nobody answered your question. I’m currently living in Italy inside of a house with concrete walls. Personally, I would recommend the Orbi 960 Series Quad-band WiFi 6E. I have a lot more to say but tired and need to get some sleep before I go to work in a few hours. Let me know if you have questions.
I live in remote secluded area. Had no internet for 27 years and recently got starlink. It comes with a router but I think I need better saturation now. Trying to understand the tech as I move toward some smart home options. Thanks for the video
I bought a second router thing from Starlink. We have one on our top floor towards the back of the house (connected to the dish) and another on the lower floor at the front of the house. We were going to buy another to put in a shed 75 ft away, but we haven't yet. The range and performance is tremendous and seamless. We strapped the dish to our chimney. We live in the boonies. But, thanks to Biden's infrastructure bill, we are getting gigabit wired Internet THIS WEEK! Super excited. Rural America finally joining the rest of the world.
I have a shop in my backyard. I want to know if I can use the extender in the shop with the Wi-Fi in the house the house is 1800 ft.² and we use Comcast.
I've got a Orbi mesh setup.. the coverage is significant better than your standard wifi/extender setup. But it's not as spectacular as some make it out to be. But nevertheless it's the way to go IMO as long as you can find a good deal. I recommend getting the older Orbi wifi 5 system on sale for closer to $100 as best value if you don't wanna break the bank.
My house is full brick, no plasterboard or hollow walls anywhere so the signal to my bedroom doesn’t connect well as it’s on the other side of the house. So would the Deco6E be the best choice for me? I usually have to use 4G in my room and my pc Wi-Fi connection is horrible
I do not recommend DECO system. my experience has been terrible. the system has major flaw, they haven't fixed. ( Port Sensenig) fails and renders the unit useless.
Speaking of wifi, I've read that S23 Ultra users are experiencing wifi connectivity issues. I am as well. Using mobile data is just much faster. Sometimes, things won't load on wifi. It's rumored that the next monthly software update will fix this. I hope so because I really like the phone.
I saw something about this the other day. I haven't noticed any issues myself but hopefully we get a fix soon for people who are experiencing this problem.
@@brad0805 The speakers on the S23 Ultra are significantly better than the S22 Ultra. It's amazing!! That's one of my top 3 favorite things about the S23. But yeah! This wifi issue is reportedly exclusive to only thr Ultra model.
wait you said you got 300-400mbps/sec download on your 1giga bit which is the extent of my wireless plan?? what do you mean aren't you supposed to then get 1000mbps download speed? 4:15
There is one huge upside to using a Mesh WiFi setup over the normal style of WiFi Router we all know about. Let's say you own a TP-Link Deco Mesh system that comes with 3 devices. Now let's say the main Deco device that had the broadband modem connected to ended up dying therefore you lost internet access. You can simple move one of the other Deco devices to where the broadband modem is located and get it back up running. If have a normal style of WiFi Router if that thing quits working for some reason you can SOL until you get it replaced.
Help me out. I’ve got a brick home and my router is in our “office” in a separate building on the back of our garage. All WiFi therefore has to go through two brick walls to get in our one-story 3300SF house. I get a spotty or no WiFi signal at times even though I pay for 1G speed. Could I get a two-mesh system with one placed nearer the office and another further away? Would the one further away relay to the closer one which in turn relay to the router? Also I need a very basic lesson here. Is the router a modem and router combo?
Hello, interesting video, but I'm curious what you recommend for purchase for use in the house and of course another building, the garage and the rooms above it, or is it better to get the AX WIFI Router, maybe the AX WIFI Mesh, in which case it's better to buy both and somehow get rid of drilling holes and pulling the cable if that's not possible?
My experience with AXE 5400 has been 20kbps download speeds when 25feet from the meshed unit that’s literally 10feet above the one connect to the ONT box via cat8. These TP-Link mesh units don’t produce enough wifi to even download a 1GB update in under a day. DO NOT RECOMMEND!
Every single router, literally every single one, is apparently garbage! I've looked at all of the TP LINK, NETGEAR, ASUS, UBIQ and so on and each time there is someone or more than one stating how garbage it is. Something feels odd about that.
@@SL1PSTAR quality control across all goods has nose dived since 2020. The amazon reviews look great but one review explains the issue of the mesh not properly switching as you move away from a unit which may be something to do with the ai or too much interference from other nearby networks running similar equipment.
@@BuddMonster420 I will definitely avoid mesh systems going forward as they appear to pull in the most negative experiences. Access points is where I'm starting but I'm so tired of researching and getting nowhere. I totally agree with the Amazon point you make though. 2 out 3 products from Scamazon are either problematic, unwanted, misleading or just unreliable drop ship garbage.
I have an archer ax4400 that works fine for my house and attached garage but recently built a metal shop 100 feet away that has no signal. I ran a cat6 underground cable out to it. If i buy the deco will it mesh being plugged to the lan cable. I really don't want to add another router with a different name to have to switch back an forth between. Not very tech savvy. Thanks
Just bought the XE75 Pro 2 pack, one major issue is Deco does NOT support separate 2.4GHz and 5GHz SSIDs, I thought I saw in one of these videos that you can do that, but I guess that was a diff router, so now that you know this flaw, if you need this feature, the whole line of DECO is not for you.
one option is to enable guest network and set it to only 2.4Ghz, and then the main network set it as 5Ghz and effectively does the same thing, except the guest network will be isolated from the the main one
Hello sir sorry to bother ya, I have a question I have starlink it's great but I'm unable to reach my office in my barn that's about 75ft from the router in the house, I'm unable to get a signal out there to connect my computer and security camera, could you please advise me on what to do with the starlink stuff?
Hi, got a 4 bedroom house, 3 story house and one detached garage/home office. I'm thinking in 4 deco xe75 not sure if that's right. One in each story and another one in the office where I work. My main concern are the walls in the detached garage. The garage is 4m away from the house. Thanks
Great video, I have 1G fiber internet, Right now I have a Asus GT-AX 11000 pro for gaming and Wifi, I am looking to another Router, I was think of getting another Asus Ax11000 pro, Or 2 Asus zenwifi pro ET12, Which setup do you think will give me faster speeds with more courage?
I have Xfinity in my house. Dosen't work in my garage or outside . Do I need an Extender to reach those areas ? What kind ? How do ii hook it up ?. Wayne, Thanks
I’m undecided as to which route to go. Urgently, I have an Xfinity gateway in the basement and two xPods on the main floor at either ends of the house. I was thinking of getting the Deco XE75 Pro 2 Pack, but I’m und]sure if it will cover the main floor as I have some outside cameras. If I go the traditional route I expect to need range extenders and see that the AXE5400 with WiFi 6E costs quite a bit. I’m trying to stay around $200 as I want to return the rental equipment and have it paid for in a year. Any suggestions/considerations?
I have a small apartment 1100 sq ft one floor. My ring camera is having connectivity issues after 3 years of having no issues. Will a router and mesh be best? My ring camera is at my front door, but I’ve noticed there’s way more ring cameras now within my apartment complex. High end router or just go with mesh router?
How did you get the Deco's to connect to the router? I am thinking about doing this exact same setup, but nervous about compatibility. Would love some more information on this because the internet says they do not work in conjunction with each other.
question as you seem pretty knowledgable. I bought one x10 deco tp link mesh. My house is two floors. Starlink internet on the first floor. as a result second floor no internet at all. Now I noticed the deco x10 needs ethernet to connect to internet. isn't another way to connect it via wifi and put in the place where the internet kinda ends in order to extend the signal to the upper floor?
Thanks very much for this info. Husband and I are retired and def not tech savvy but can understand some. So here’s our question: if we get the mesh router, does it replace our current Century Link router? We’re looking into this bec our connection is very poor. Our Prime Videos buffer almost constantly.
Do both decos have a Ethernet connection cause the hook up in in our living room. I need this for my room. My ps portal won’t stay connected so I’m looking into the TP-Link Dual-Band AX1500 WiFi 6 Mesh Wi-Fi System (Deco X15) hoping that fixes it
Hi TechOdyssey, I have existing 3 AC2200 ( 1 connected to router 2 as extended nods for coverage purpose) connected to a high speed 2 bands router 4 years ago. Now I want to upgrade this wifi 6 Tplink AXE5400 router for wifi 6 and at least 1 or 2 pack XE75 as access nods and link all others deco M9+ into it, is this the right way to upgrade the speed to the network or is there another cost saving ways to improve coverage in my 5800sq ft home? Thanks😄
I already have this router , but my patio area is 450 feet by 80 feet and an extender will be helpful. Which one is the best to plug using cat 5e cable as a mesh
Can you assist with this set up with Starlink. I'm assuming I connect the starlink adapter and hook to the tp link router and bypass the starlink router. Set up the TP link router and the mesh nodes to "speak" with the router. Is this correct? I'm not tech savvy and anxious. I have purchased the TPlink AXE7800 & the AXE 5400 Triband Mesh wifi 6E system Deco XE75 Pro (3pack) - help
Did I understand you to say you had both the axe and the Deco operating at the same time? how does that work? Can I leave my existing Router and add the mesh?
Doesn't work that way. The one with the router is called OneMesh that only works with other routers and Wifi Extenders, so in that case you probably wouldn't need as "powerful" router as Archer AXE75, because it would be adviced to turn that Wifi off entirely if you want a Mesh that is supposed to work like a Mesh does. You can however plug in Deco devices to this router and play with the OneMesh and then get multiple Deco Mesh devices to each dead spot of your house, e.g. floor 1, 2, 3 and garage and they work. This is a shame in my opinion, since I really thought that Archer AXE75 would be in the same Mesh with Deco devices, but nope. This was a poor choice from TP-Link in my opinion.
My centurylink DSL router receives signal via phone line, we do not have cable,fiber where I live I live in the country. My router needs replaced “0ld” and not working properly and provides poor home coverage. So to go to a mesh system do I need to replace my old router/modem first ? Or do mesh systems have router built in?
I have wireless 5G Internet from ATT and want to add a router to create a static IP address for my Roku streaming. Hulu live tv gets confused with dynamic IP addresses causing the system to think I'm not at my home location. Don't need Mesh, so is it easy to do this with the router?
One question what are your walls made from, none of mine are plaster board (dry wall) , i'm in the UK, all my internal walls are brick 5ghz no chance, 2.4ghz stuggles, great video though
Do you have a video of how to connect the Deco as a wireless extender to the router? I purchased the exact same deco and router you used on this video but cannot figure out how to connect the deco as a wireless extender.
Hi, I have tplink archer ax73 but not sufficient for whole house. What can I do? Does onemech and decomesh work together? Can i connect Onemesh with deco mesh?
@@cristian.rengifo i think deco is easier to manage overall.. onemesh is good if u alrdy bought the non deco stuff like me.. cos u can mesh without purposely buying mesh.. but since i have both, id say deco is easier.. and heres a few positives: easier and faster to load and see things, has dark mode, has built in speed tester, has native protection..
Noob question but need help🙏🏻 I am moving to a new house and currently own one "TP-Link Talon AD7200 Multi-Band Wi-Fi Router" as well as 3 "Linksys WHW0101 Velop Whole Home Mesh WiFi System". The house is quite big and was wondering if i connect the 3 Velops via ethernet cables to the TP link, will it be one connection across the whole house and nodes being used as extenders??? Is setting it up easy?? Sorry if question sounds dumb and thanks in advance
One thing that constantly pushes me away from mesh systems is how limited their admin pages are. Right now I have the eero devices since that's what my ISP provides and whenever I want to tinker around on my home network I constantly find myself annoyed at how limited the functionality is for the eero devices. I was looking into these deco devices but apparently it's the same story with them as well :( I've considered just having one main router for the top floor of my house and one main router as a subnet for the bottom floor of my house but I'm a little hesitant on doing this as well because then my phone won't auto switch between the two routers
my house has a long corridor each room has thick concrete walls and the signal cant go through all those walls. would putting a mesh in each room help penatrate each wall or should i try more routers?
Hello! I have Verizon Fios and I using Verizon Router CR1000A and Extender E3200 include. My question is can I stay with Verizon Fios or get my own router and extended, which one you recommend. Thank you very much.
I have a Verizon router modem combination. But there is coax cable hooked up to the router. I bought the Deco mesh system and my house is only 2000 ft.² I have plugged it into every outlet. I have upstairs and downstairs and my ring cameras which are 2.5 and five are not working properly. Do you have any idea what is going on?
I'm in an apartment where the Internet comes into a bedroom closet that backs onto the kitchen wall where the microwave is installed. I'm not sure how much signal degradation there is. I own an Archer AXE5400 as well as a DECO M9 Plus 2 unit Mesh units. I don't have any WIFI 6E devices yet. Do you know of a detailed installation video with the detailed router settings to create a MESH network. I have ethernet capability in the office area which is the farthest area from the router closet. Apologies for the long description.
I use a WiFi Router and some Wifi APs, but connected by Ethernet. Sadly the "Mesh" functionality doesn't work perfectly on the ones I have, but it's good enough I guess.
Hi, I wanted to build a setup like this with my existing AX73 and 2x deco M4. For now my AX73 is at G floor and my RE705 is at middle of 2nd floor. The AX73 and RE705 is using a Onemesh setup. The 3rd floor seems not getting optimum connection as sometimes my iPad M1 experience in Wi-Fi drop. For your setup, do you have a different SID for AXE75 and Deco XE75?
I'm in a 2 bedroom apartment my router is in the living room and 20 ft away are the rooms which my PlayStation is in and the connection drops crazy bad like every few minutes, would you suggest the archer or the mesh?
Can you add the mesh to your existing network with a modem/router combo? Or do you need to get a modem and remove the existing combo unit? I want to add mesh, but I can't figure out if I can just add it to my existing network...
What to do when my mesh in my bedroom upstairs only reaches 4mbps while the router and mesh downstairs have 90+mbps? Doesnt that defeats the purpose of a mesh to begin with?
Hello! Great video! I have a 4-story townhouse. 4,500 Sq ft. I plan on getting the router/modem and mesh network. How many of the wifi mesh do you think I should get? I'm thinking 3 minimum.
@@TechOdyssey cause I have a mesh system and I'm not impressed with it. Two BE95's On the 6ghz band I barely get 90 mbps sitting 6 ft away the 5ghz band used to give me 800+ and now it's dropping after only using them 2 weeks constantly to less that 500mbps yet my hard wire is always 970mbps. I think the WiFi is failing.
Why do people still use gaming as an excuse for recommending wifi setups? Seriously if you need low latency just buy a long ethernet cable and some cable clips / raceway. WiFi is for watching tv, phone stuff or browsing stuff you don't care if it takes a fifth of a second shorter, not gaming at the level that latency that you need the peformance low latency gives you. Great video though. Perfectly explained
wire Mesh vs wireless Mesh for 3 Storey house currently i am using Nanostation m2 and powerline m5 as soho router with wire they suport 100 mbps and 150 mbps and our ISp are providing over than their capacity like 200+mbps
I am struggling to get 70mbps on my Sky ISP, Meant to be superfast as well I think, lol, So I got the TP-Link AX3000 AX55 Router, For the VR, I am a Sim Racer who races online in AMS 2, But when there is a bust track of cars, Then I am getting stuttering going on, Making my gaming crap, I have issues with Virtual Desktop wireless, And I am paying for a Sky WiFi booster too, lol, I rang Sky earlier to be told I have to wait for an engineer to get a Router I bought working, lol, It is nuts, Why can't I just plug the Router in and it work like the Sky router does, I got the Router tether working on my phone so the Router is configured but it is not letting the ISP connection go through to the Router, I can't even fix it on the Sky help thing or self fix part, I tried by no luck, I am gutted coz the Sim Racing helps with Anxiety I suffer from, But when the Sim racing isn't very smooth and it stutters it makes me look like a terrible driver when I am not, lol, 6.06 in the MP4 McLaren on the Nordsliefe in AMS 2 ain't too shabby, Just the online experience isn't up to scratch, Why Sky is still using old tech in the routers is being me, WiFi 7 is coming soon, And Sky still rolls out 5ghrtz, Not even WiFi 6, They would charge extra for that lol, Sky does an upgrade on the Routers but you needs certain package, I cannot get, lol, So this Router is my only option, lol, What would be the problem where the ISP light isn't coming on, Or internet isn't coming into the Router when everything is set up how I think it should be, lol..... Is there any vids of people fixing connection issues why Sky as the ISP provider, Who uses Open Reach, That is fixing the issue of no internet coming into the Router,. I have internet but not with the AX3000 AX55 Archer Router, lol, Can anyone help me fix my connection problems, Or have I got to wait for an Engineer to sort it out....
@@TechOdyssey Thanks for clarifying. Also, if my main router is AC1200 with one gigabit port, do i have to change the router or just plug the mesh to the gigabit port and have all the devices connect to the mesh?
Dude, are we the same person? I have the same 3 piece canvas in your background. I got the S23U. I have the same exact router. And I just bought the same mesh network lol
i have a main tplink archer router, i bought a the deco s4 3pack thinking it would be like extenders - now the main deco is taking over as the main router and my speeds have dropped tremendously- any advice ?
To be honest if you are using a TP-Link Deco system you should not need a standard router. Just place the Deco's evenly throughout the house as you can and you should be golden. At that point each device will use the Deco that offers the best WiFi signal. Myself I have the TP-Link W4500 Mesh system that comes with 3 devices. One of them is at one end of the home with the broadband modem which is where my desktop is located which is wired to that Deco. The other two Deco's are placed evenly throughout the house as I could and my WiFi signal's are great so is the speeds. Got quite a few smart devices like light bulbs plus other things and they tend to connect to the closest Deco.
Have a nighthawk wireless router and home built with concrete floor and ceilings. Having bad wifi within room to room and nevertheless on the ground level. Any suggestions to have better wifi for laptop, phones and TV and the ground floor electronics-any tips are appreciated.
Great video but I’m not sure if I want to stay with TP link I purchase in 2019 archer multi band gaming router, which worked really good but just stopped working and TP link will not replace it spent $600 on it from Best Buy. Crazy company does not stand behind their product.
Please help. I am using Tp link Deco M4 for the past 2 years. It suddenly stopped working. The main deco which is kept downstairs is working but the other 2 Decos on the top floor are not giving internet. The deco app shows no error. But the internet keeps on disconnecting every 5 to 10 seconds or it just stops. The wifi signal is there but no data on the top floor Decos. I have not changed the positions of the Decos. Have done nothing new. Why would this happen, what should i do ?
Although on Google website, Google claimed that Google Nest Wifi Pro support Wifi 6E, but in reality it’s not. My Pixel 7 Pro still using 5Ghz to connect wirelessly to Google Nest Wifi Pro. #Google: fix this problem please.
If i want to install Deco Mesh should i connect it to my router or can i just put it on 2nd floor then connect them through wifi connection? i need some help hahaha
@@chris_schenkel what’s really sad is how pathetic you are as a human being. I was asking for clarification so I could make sure I answered his question appropriately. You’re just scum.
Yes. It will still depend on how strong the signal is between nodes. If nodes are connected via ethernet backhaul, then there won’t be any signal issues/lag.
Really enjoyed your explanation. You are the first person that I could actually understand what you were saying. I have att all in one router/modem and I have a Decx20 wifi 6 plugged into it, but I am still having problems getting signals to the back of my house. My house is 2200 and it is a perfect square. My base deco is only 20 feet from the first pod and is going through one wall, I am getting good speed there, but the other pod, which is about 20 feet or less is sending the signal through 3 walls and I cannot faster than 70 mbps. I checked the att apps for signal strength and it telling that the signal is week. DO you have any suggestions? Should I get rid of the att router? Thank you
Bypass the att router use mesh to assign ips etc …att 320-505 modem/router wifi sucks…at least in my opinion and house, and I only have a 1300sq ft single story
Morning Adam just a question I have Xfinity internet will that replace the router they give us and will that help eliminate them from throttling us / we pay for the 119mb speeds but can't stream vids very good over 480p ???
@@gregoryaul2005 have you done a speed test to see what actual speeds you're getting over wifi? You can do a simple test by googling speed test and using the test there.
@@TechOdyssey yes I have it's close to what it should be but when I use cinama hd can't barley stream over 480p movies it buffers every 2 to 3 minutes for 5 to 7 sec.
Links and Promo Codes:
Archer AXE75: Use code 10ODYSSEY at amzn.to/40V7PuG
Deco XE75, 2-pack & 3-pack: Use code 10ODYSSEY at amzn.to/3RORYJU
Deco XE75 Pro (2-pack): amzn.to/3ZjKild
Deco XE75 Pro, 3-pack (Amazon): amzn.to/3ZjKild
Deco XE75 Pro, 3-pack (Best Buy): bit.ly/3EW8nHp
What about band confusion ? ie having both types, I know they are supposed to have channel hopping capability, is that an issue adding a mesh and a standard in the same room ? Thanks for the vid info...
@TechOdyssey question, I live in a 2br apartment 1 floor, about 900-1000sq ft of size of the apartment. I stream for my TV and I have been doing some speed test for my internet. I found that I have better download speeds on WiFi than hardwired using my Android TV box. I only have about 6 devices connected to my wifi and I'm also using my ISP router which is not the greatest. My router is located in my living room and my streaming devices are in my bedroom which is roughly about 10-15ft away from the router. Would you recommend the TP link router for the best solution?
@@Darylbnet67Ouch. The UA-camr does not respond.
TP Link mesh setup has been a game changer. Old pre war house, not big but built like a tank. without the mesh only 1 floor had reliable internet. Now full coverage.
I completely agree!
How’s this compare with eero
And how long did it last? 😂
There is a third, "hybrid" option. You can go with a conventional TP-link router, and add extenders in OneMesh mode. That's what I opted for.
That is what I am planning to do.
Is it better?
@@roarrrist It works but the router and extender placement matters. If the further device signal isn't weak enough it won't switch to the closer extender. But mostly the system does what I need.
@@roarrrist Deco setup requires that you use a tp-link cloud account to configure. OneMesh devices can be configured from the web portal on the device.
@@EvilGav i have a question can the main node be in the 2nd floor in a 3 story home?
We just had fiber put in and they came and installed the modem today. We bought the TP-Link - Archer AXE7800 Tri-Band Wi-Fi 6E Router and set it up. Was super easy and OMG the speeds are so much faster than our old coaxial internet and modem/router setup. We're getting about 250 Mbps down and 250 Mbps up! Thanks for the tip on pointing the antennas. I adjusted them to point towards the areas of the house we typically use WiFi. I checked the signal strength on all three floors- it's 100% on the middle floor with the router and about 90% on the second floor and about 80% in the basement rooms on the 5 GHz channel. On the 2.4 GHZ it's 100% throughout the entire house. I haven't tested the 6G yet.
hello , ihave the at&t fiber and was told cany use a different router than the 320 fiber router which came with my at&t, does not support, please help
Is it better than having mesh?
Am I correct that the AXE7800 does not have any at a glace status lights for internet, wifi, ports, usb, etc?
@@mykylc Correct, besides two blueish white lights denoting connectivity (two solid lights meaning connected status) there are none. I haven't found the lack of status lights to be an issue.
@@frostystearn Use a router your ISP recommends. It is true that any router might work, it is also true that all routers might not work.
They need longer names for these routers.
If needed, would you recommend adding the decos to the TP or just using the decos on their own?
I've heard good things about the deco 75. Right now I'm still running an older Nighthawk router and looking to upgrade soon.
If you have a long property, then multi mesh is the way to go with 3 units. Line of sight in a fairly straight line gives the best results.
What about a 2 story stone building with dead spots on the second floor at the "back" of the home wrih the router on the 1st floor at the "front"
this or you can connect the mesh using UTP, not Wireless.
Too bad they don't make weatherproof ones for properties
@@squaddingquadsI noticed that nobody answered your question. I’m currently living in Italy inside of a house with concrete walls. Personally, I would recommend the Orbi 960 Series Quad-band WiFi 6E.
I have a lot more to say but tired and need to get some sleep before I go to work in a few hours. Let me know if you have questions.
I live in remote secluded area. Had no internet for 27 years and recently got starlink. It comes with a router but I think I need better saturation now. Trying to understand the tech as I move toward some smart home options. Thanks for the video
Did you try it and did it work?
@@gabrielbaker3188 Haven't done anything else yet. Still trying to decide on a security system and network options. The starlink router isn't bad.
Welcome to the internet age courtesy starlink 😂
I bought a second router thing from Starlink. We have one on our top floor towards the back of the house (connected to the dish) and another on the lower floor at the front of the house. We were going to buy another to put in a shed 75 ft away, but we haven't yet. The range and performance is tremendous and seamless.
We strapped the dish to our chimney. We live in the boonies.
But, thanks to Biden's infrastructure bill, we are getting gigabit wired Internet THIS WEEK! Super excited. Rural America finally joining the rest of the world.
I have a shop in my backyard. I want to know if I can use the extender in the shop with the Wi-Fi in the house the house is 1800 ft.² and we use Comcast.
So which one would you connect first to your internet. Archer or Deco. I have both AEX75 and DECO XE75.
I ordered the Wifi 6E. Thanks for the video
I've got a Orbi mesh setup.. the coverage is significant better than your standard wifi/extender setup. But it's not as spectacular as some make it out to be. But nevertheless it's the way to go IMO as long as you can find a good deal. I recommend getting the older Orbi wifi 5 system on sale for closer to $100 as best value if you don't wanna break the bank.
I’ve heard good things about Orbi.
I’m going to return my orbis today. They pushed an update recently that’s made my satellites so unstable it’s not even worth it anymore
@@sqielyr try resetting your router and ENTIRE network, not just orbi. And change wifi PW. I had to do that and its back to normal.
My house is full brick, no plasterboard or hollow walls anywhere so the signal to my bedroom doesn’t connect well as it’s on the other side of the house. So would the Deco6E be the best choice for me? I usually have to use 4G in my room and my pc Wi-Fi connection is horrible
What did you go with? I guess he doesn’t answer questions 🙃
These are the ABSOLUTE BEST budget mesh system out there.These paired together with Ethernet or MOCA backhaul is a super solid setup.
It’s a good setup for sure.
I do not recommend DECO system. my experience has been terrible. the system has major flaw, they haven't fixed. ( Port Sensenig) fails and renders the unit useless.
Can you use both efficiently together?
Speaking of wifi, I've read that S23 Ultra users are experiencing wifi connectivity issues. I am as well. Using mobile data is just much faster. Sometimes, things won't load on wifi. It's rumored that the next monthly software update will fix this. I hope so because I really like the phone.
I saw something about this the other day. I haven't noticed any issues myself but hopefully we get a fix soon for people who are experiencing this problem.
I have noticed some issues but for as long as I had it, 6E does cut out but this happened to me like twice I had it since February 23rd.
I haven't had any issues with my s23 ultra and my deco wifi 6 mesh network. The radio on this phone is MUCH better than the s22 + as well!
@@brad0805 The speakers on the S23 Ultra are significantly better than the S22 Ultra. It's amazing!! That's one of my top 3 favorite things about the S23.
But yeah! This wifi issue is reportedly exclusive to only thr Ultra model.
@@cordovanhobbyist895 I have the s23 ultra, and I agree with you about the speakers!👌 I don't have any of the wifi issues though.
wait you said you got 300-400mbps/sec download on your 1giga bit which is the extent of my wireless plan??
what do you mean aren't you supposed to then get 1000mbps download speed? 4:15
You said you use the Archer and the Deco in conjunction. I though the two mesh technologies are incompatible? AI-Driven Mesh vs OneMesh
Hi, can you use the router (e.g. AXE75) as the centre of a mesh setup? (e.g. 3xXE75)
There is one huge upside to using a Mesh WiFi setup over the normal style of WiFi Router we all know about. Let's say you own a TP-Link Deco Mesh system that comes with 3 devices. Now let's say the main Deco device that had the broadband modem connected to ended up dying therefore you lost internet access. You can simple move one of the other Deco devices to where the broadband modem is located and get it back up running. If have a normal style of WiFi Router if that thing quits working for some reason you can SOL until you get it replaced.
Help me out. I’ve got a brick home and my router is in our “office” in a separate building on the back of our garage. All WiFi therefore has to go through two brick walls to get in our one-story 3300SF house. I get a spotty or no WiFi signal at times even though I pay for 1G speed. Could I get a two-mesh system with one placed nearer the office and another further away? Would the one further away relay to the closer one which in turn relay to the router?
Also I need a very basic lesson here. Is the router a modem and router combo?
I just bought this axe5400. Can I just buy one of the mesh devices to save money or do I need the base unit as well ?
Hello, interesting video, but I'm curious what you recommend for purchase for use in the house and of course another building, the garage and the rooms above it, or is it better to get the AX WIFI Router, maybe the AX WIFI Mesh, in which case it's better to buy both and somehow get rid of drilling holes and pulling the cable if that's not possible?
My experience with AXE 5400 has been 20kbps download speeds when 25feet from the meshed unit that’s literally 10feet above the one connect to the ONT box via cat8. These TP-Link mesh units don’t produce enough wifi to even download a 1GB update in under a day. DO NOT RECOMMEND!
Every single router, literally every single one, is apparently garbage! I've looked at all of the TP LINK, NETGEAR, ASUS, UBIQ and so on and each time there is someone or more than one stating how garbage it is. Something feels odd about that.
@@SL1PSTAR quality control across all goods has nose dived since 2020. The amazon reviews look great but one review explains the issue of the mesh not properly switching as you move away from a unit which may be something to do with the ai or too much interference from other nearby networks running similar equipment.
@@BuddMonster420 I will definitely avoid mesh systems going forward as they appear to pull in the most negative experiences.
Access points is where I'm starting but I'm so tired of researching and getting nowhere.
I totally agree with the Amazon point you make though. 2 out 3 products from Scamazon are either problematic, unwanted, misleading or just unreliable drop ship garbage.
I have an archer ax4400 that works fine for my house and attached garage but recently built a metal shop 100 feet away that has no signal. I ran a cat6 underground cable out to it. If i buy the deco will it mesh being plugged to the lan cable. I really don't want to add another router with a different name to have to switch back an forth between. Not very tech savvy. Thanks
What's the advantage over a regular WiFi booster?
Just bought the XE75 Pro 2 pack, one major issue is Deco does NOT support separate 2.4GHz and 5GHz SSIDs, I thought I saw in one of these videos that you can do that, but I guess that was a diff router, so now that you know this flaw, if you need this feature, the whole line of DECO is not for you.
they have auto detect for that the devices that support 5gh will automatically connect to that
one option is to enable guest network and set it to only 2.4Ghz, and then the main network set it as 5Ghz and effectively does the same thing, except the guest network will be isolated from the the main one
Hello sir sorry to bother ya, I have a question I have starlink it's great but I'm unable to reach my office in my barn that's about 75ft from the router in the house, I'm unable to get a signal out there to connect my computer and security camera, could you please advise me on what to do with the starlink stuff?
Hi, got a 4 bedroom house, 3 story house and one detached garage/home office. I'm thinking in 4 deco xe75 not sure if that's right. One in each story and another one in the office where I work. My main concern are the walls in the detached garage. The garage is 4m away from the house. Thanks
Great video, I have 1G fiber internet, Right now I have a Asus GT-AX 11000 pro for gaming and Wifi, I am looking to another Router, I was think of getting another Asus Ax11000 pro, Or 2 Asus zenwifi pro ET12, Which setup do you think will give me faster speeds with more courage?
I have Xfinity in my house. Dosen't work in my garage or outside . Do I need an Extender to reach those areas ? What kind ? How do ii hook it up ?. Wayne, Thanks
I’m undecided as to which route to go. Urgently, I have an Xfinity gateway in the basement and two xPods on the main floor at either ends of the house. I was thinking of getting the Deco XE75 Pro 2 Pack, but I’m und]sure if it will cover the main floor as I have some outside cameras. If I go the traditional route I expect to need range extenders and see that the AXE5400 with WiFi 6E costs quite a bit. I’m trying to stay around $200 as I want to return the rental equipment and have it paid for in a year. Any suggestions/considerations?
I have a small apartment 1100 sq ft one floor. My ring camera is having connectivity issues after 3 years of having no issues. Will a router and mesh be best? My ring camera is at my front door, but I’ve noticed there’s way more ring cameras now within my apartment complex. High end router or just go with mesh router?
How did you get the Deco's to connect to the router? I am thinking about doing this exact same setup, but nervous about compatibility. Would love some more information on this because the internet says they do not work in conjunction with each other.
question as you seem pretty knowledgable. I bought one x10 deco tp link mesh. My house is two floors. Starlink internet on the first floor. as a result second floor no internet at all. Now I noticed the deco x10 needs ethernet to connect to internet. isn't another way to connect it via wifi and put in the place where the internet kinda ends in order to extend the signal to the upper floor?
Thanks very much for this info. Husband and I are retired and def not tech savvy but can understand some. So here’s our question: if we get the mesh router, does it replace our current Century Link router? We’re looking into this bec our connection is very poor. Our Prime Videos buffer almost constantly.
Do both decos have a Ethernet connection cause the hook up in in our living room. I need this for my room. My ps portal won’t stay connected so I’m looking into the TP-Link Dual-Band AX1500 WiFi 6 Mesh Wi-Fi System (Deco X15) hoping that fixes it
Hi TechOdyssey, I have existing 3 AC2200 ( 1 connected to router 2 as extended nods for coverage purpose) connected to a high speed 2 bands router 4 years ago. Now I want to upgrade this wifi 6 Tplink AXE5400 router for wifi 6 and at least 1 or 2 pack XE75 as access nods and link all others deco M9+ into it, is this the right way to upgrade the speed to the network or is there another cost saving ways to improve coverage in my 5800sq ft home? Thanks😄
I already have this router , but my patio area is 450 feet by 80 feet and an extender will be helpful. Which one is the best to plug using cat 5e cable as a mesh
Can you assist with this set up with Starlink. I'm assuming I connect the starlink adapter and hook to the tp link router and bypass the starlink router. Set up the TP link router and the mesh nodes to "speak" with the router. Is this correct? I'm not tech savvy and anxious. I have purchased the TPlink AXE7800 & the AXE 5400 Triband Mesh wifi 6E system Deco XE75 Pro (3pack) - help
Thanks for the video. Can you tell me the difference between the XE75 and W7200 ? Appreciate the help.. Thanks!
How do you connect the mesh system to the internet? Dont you need a traditional router as well?
Did I understand you to say you had both the axe and the Deco operating at the same time? how does that work? Can I leave my existing Router and add the mesh?
Doesn't work that way. The one with the router is called OneMesh that only works with other routers and Wifi Extenders, so in that case you probably wouldn't need as "powerful" router as Archer AXE75, because it would be adviced to turn that Wifi off entirely if you want a Mesh that is supposed to work like a Mesh does. You can however plug in Deco devices to this router and play with the OneMesh and then get multiple Deco Mesh devices to each dead spot of your house, e.g. floor 1, 2, 3 and garage and they work.
This is a shame in my opinion, since I really thought that Archer AXE75 would be in the same Mesh with Deco devices, but nope. This was a poor choice from TP-Link in my opinion.
My centurylink DSL router receives signal via phone line, we do not have cable,fiber where I live I live in the country. My router needs replaced “0ld” and not working properly and provides poor home coverage. So to go to a mesh system do I need to replace my old router/modem first ? Or do mesh systems have router built in?
I have wireless 5G Internet from ATT and want to add a router to create a static IP address for my Roku streaming. Hulu live tv gets confused with dynamic IP addresses causing the system to think I'm not at my home location. Don't need Mesh, so is it easy to do this with the router?
Great video. However I’m looking for a video how to install either of the products to a Comcast Gateway. Thanks
One question what are your walls made from, none of mine are plaster board (dry wall) , i'm in the UK, all my internal walls are brick 5ghz no chance, 2.4ghz stuggles, great video though
Looking for a router that supports WEB wireless Security instead WPA2 I want option please. I have AX6000 TP LINK
Do you have a video of how to connect the Deco as a wireless extender to the router? I purchased the exact same deco and router you used on this video but cannot figure out how to connect the deco as a wireless extender.
super helpful bro. as a fellow spectrum customer this was extremely helpful
Hi, I have tplink archer ax73 but not sufficient for whole house. What can I do? Does onemech and decomesh work together? Can i connect Onemesh with deco mesh?
Buy one piece onemesh extender or onemesh router
@@Blackbind01 so onemesh is better than deco?
@@cristian.rengifo i think deco is easier to manage overall.. onemesh is good if u alrdy bought the non deco stuff like me.. cos u can mesh without purposely buying mesh.. but since i have both, id say deco is easier.. and heres a few positives: easier and faster to load and see things, has dark mode, has built in speed tester, has native protection..
Noob question but need help🙏🏻 I am moving to a new house and currently own one "TP-Link Talon AD7200 Multi-Band Wi-Fi Router" as well as 3 "Linksys
WHW0101 Velop Whole Home Mesh WiFi System".
The house is quite big and was wondering if i connect the 3
Velops via ethernet cables to the TP link, will it be one connection across the whole house and nodes being used as extenders??? Is setting it up easy??
Sorry if question sounds dumb and thanks in advance
One thing that constantly pushes me away from mesh systems is how limited their admin pages are. Right now I have the eero devices since that's what my ISP provides and whenever I want to tinker around on my home network I constantly find myself annoyed at how limited the functionality is for the eero devices. I was looking into these deco devices but apparently it's the same story with them as well :(
I've considered just having one main router for the top floor of my house and one main router as a subnet for the bottom floor of my house but I'm a little hesitant on doing this as well because then my phone won't auto switch between the two routers
my house has a long corridor each room has thick concrete walls and the signal cant go through all those walls. would putting a mesh in each room help penatrate each wall or should i try more routers?
Thank you for the great information! New router needed.
i live in a 4 Story home my router is at the ground floor and my pc is at 4th floor i barely have wifi
Move that router to a middle floor and split the difference
Does the mesh hub give you the same speed as you can get when you are right next to your router
Hello! I have Verizon Fios and I using Verizon Router CR1000A and Extender E3200 include. My question is can I stay with Verizon Fios or get my own router and extended, which one you recommend. Thank you very much.
I have a Verizon router modem combination. But there is coax cable hooked up to the router. I bought the Deco mesh system and my house is only 2000 ft.² I have plugged it into every outlet. I have upstairs and downstairs and my ring cameras which are 2.5 and five are not working properly. Do you have any idea what is going on?
I'm in an apartment where the Internet comes into a bedroom closet that backs onto the kitchen wall where the microwave is installed. I'm not sure how much signal degradation there is. I own an Archer AXE5400 as well as a DECO M9 Plus 2 unit Mesh units.
I don't have any WIFI 6E devices yet. Do you know of a detailed installation video with the detailed router settings to create a MESH
network. I have ethernet capability in the office area which is the farthest area from the router closet. Apologies for the long description.
What devices are you using for it and if you aren't going to use 6E or upgrade your devices to use it, what's the motivation?
I use a WiFi Router and some Wifi APs, but connected by Ethernet. Sadly the "Mesh" functionality doesn't work perfectly on the ones I have, but it's good enough I guess.
Thank you TechOdyssey!
great video, cleared all my doubts and helped me make a right informed decisoin,
Glad I could help!
Hi, I wanted to build a setup like this with my existing AX73 and 2x deco M4. For now my AX73 is at G floor and my RE705 is at middle of 2nd floor. The AX73 and RE705 is using a Onemesh setup. The 3rd floor seems not getting optimum connection as sometimes my iPad M1 experience in Wi-Fi drop. For your setup, do you have a different SID for AXE75 and Deco XE75?
I'm in a 2 bedroom apartment my router is in the living room and 20 ft away are the rooms which my PlayStation is in and the connection drops crazy bad like every few minutes, would you suggest the archer or the mesh?
Archer is fine. Plus more LAN plugs if you need them.
@TechOdyssey so router for small house is enough?
Can you add the mesh to your existing network with a modem/router combo? Or do you need to get a modem and remove the existing combo unit? I want to add mesh, but I can't figure out if I can just add it to my existing network...
Yes, just put the modem/router combo in bridge mode and connect your mesh system
@@MrPontiac005 thanks
Will this boost my signal through the powerline down my garden room 25m away from house?
So, can you hard wire in the deco extender and then feed off of that to a switch to plug more things hard wired?
Hi
I have tplink ax55 wifi 6 router connected to the ISP modem. But i want to use the deco x55 mesh router. How can i utilize both?
Could I add the Deco to the axe5400 and have them mesh?
What to do when my mesh in my bedroom upstairs only reaches 4mbps while the router and mesh downstairs have 90+mbps? Doesnt that defeats the purpose of a mesh to begin with?
Does the mesh system slow down download speeds if you have 3 of them all synced to the same network?
Hello! Great video! I have a 4-story townhouse. 4,500 Sq ft. I plan on getting the router/modem and mesh network. How many of the wifi mesh do you think I should get? I'm thinking 3 minimum.
Can i use 3 of the routers and make them a mesh of their own? Also can i add decos to a tp link router?
Why would you do that?
@@TechOdyssey cause I have a mesh system and I'm not impressed with it. Two BE95's On the 6ghz band I barely get 90 mbps sitting 6 ft away the 5ghz band used to give me 800+ and now it's dropping after only using them 2 weeks constantly to less that 500mbps yet my hard wire is always 970mbps. I think the WiFi is failing.
Is it a good idea to have my traditional router connected to my mesh? If yes how to I set that up? Thank you
Which would you recommend for a mobile home
Why do people still use gaming as an excuse for recommending wifi setups? Seriously if you need low latency just buy a long ethernet cable and some cable clips / raceway. WiFi is for watching tv, phone stuff or browsing stuff you don't care if it takes a fifth of a second shorter, not gaming at the level that latency that you need the peformance low latency gives you.
Great video though. Perfectly explained
wire Mesh vs wireless Mesh for 3 Storey house
currently i am using Nanostation m2 and powerline m5 as soho router with wire
they suport 100 mbps and 150 mbps
and our ISp are providing over than their capacity like 200+mbps
I am struggling to get 70mbps on my Sky ISP, Meant to be superfast as well I think, lol, So I got the TP-Link AX3000 AX55 Router, For the VR, I am a Sim Racer who races online in AMS 2, But when there is a bust track of cars, Then I am getting stuttering going on, Making my gaming crap, I have issues with Virtual Desktop wireless, And I am paying for a Sky WiFi booster too, lol, I rang Sky earlier to be told I have to wait for an engineer to get a Router I bought working, lol, It is nuts, Why can't I just plug the Router in and it work like the Sky router does, I got the Router tether working on my phone so the Router is configured but it is not letting the ISP connection go through to the Router, I can't even fix it on the Sky help thing or self fix part, I tried by no luck, I am gutted coz the Sim Racing helps with Anxiety I suffer from, But when the Sim racing isn't very smooth and it stutters it makes me look like a terrible driver when I am not, lol, 6.06 in the MP4 McLaren on the Nordsliefe in AMS 2 ain't too shabby, Just the online experience isn't up to scratch, Why Sky is still using old tech in the routers is being me, WiFi 7 is coming soon, And Sky still rolls out 5ghrtz, Not even WiFi 6, They would charge extra for that lol, Sky does an upgrade on the Routers but you needs certain package, I cannot get, lol, So this Router is my only option, lol, What would be the problem where the ISP light isn't coming on, Or internet isn't coming into the Router when everything is set up how I think it should be, lol.....
Is there any vids of people fixing connection issues why Sky as the ISP provider, Who uses Open Reach, That is fixing the issue of no internet coming into the Router,. I have internet but not with the AX3000 AX55 Archer Router, lol, Can anyone help me fix my connection problems, Or have I got to wait for an Engineer to sort it out....
Is it better to get the deco mesh, or buy two of the same router and mesh them together? or they both the same?
Basically the same. Get whichever is cheaper
@@TechOdyssey Thanks for clarifying. Also, if my main router is AC1200 with one gigabit port, do i have to change the router or just plug the mesh to the gigabit port and have all the devices connect to the mesh?
Dude, are we the same person? I have the same 3 piece canvas in your background. I got the S23U. I have the same exact router. And I just bought the same mesh network lol
We’re twins!
i have a main tplink archer router, i bought a the deco s4 3pack thinking it would be like extenders - now the main deco is taking over as the main router and my speeds have dropped tremendously- any advice ?
To be honest if you are using a TP-Link Deco system you should not need a standard router. Just place the Deco's evenly throughout the house as you can and you should be golden. At that point each device will use the Deco that offers the best WiFi signal.
Myself I have the TP-Link W4500 Mesh system that comes with 3 devices. One of them is at one end of the home with the broadband modem which is where my desktop is located which is wired to that Deco. The other two Deco's are placed evenly throughout the house as I could and my WiFi signal's are great so is the speeds.
Got quite a few smart devices like light bulbs plus other things and they tend to connect to the closest Deco.
Have a nighthawk wireless router and home built with concrete floor and ceilings. Having bad wifi within room to room and nevertheless on the ground level. Any suggestions to have better wifi for laptop, phones and TV and the ground floor electronics-any tips are appreciated.
Avoid net gear routers. They all suck for concrete houses
Stupid question, but can one of the mesh units act as the primary router or are they just for the mesh?
The main one can.
How well does it work, Att fiber optic modem
Works great with cable, fiber, etc…
Great video but I’m not sure if I want to stay with TP link I purchase in 2019 archer multi band gaming router, which worked really good but just stopped working and TP link will not replace it spent $600 on it from Best Buy. Crazy company does not stand behind their product.
Would a mesh system/router be able to power ethernet ports throughout my home?
It has ethernet ports on it so yes. If you need more you can connected a switch.
Is it possible to connect mobile hotspot to wifi mesh and then share internet?
Please help. I am using Tp link Deco M4 for the past 2 years. It suddenly stopped working. The main deco which is kept downstairs is working but the other 2 Decos on the top floor are not giving internet. The deco app shows no error. But the internet keeps on disconnecting every 5 to 10 seconds or it just stops. The wifi signal is there but no data on the top floor Decos. I have not changed the positions of the Decos. Have done nothing new. Why would this happen, what should i do ?
I'm having the same issue with my M4 Decos after upgrading our router to the AXE75
good info thanks for the information very well presented
You're welcome. Glad I could help. Thanks for watching.
Although on Google website, Google claimed that Google Nest Wifi Pro support Wifi 6E, but in reality it’s not. My Pixel 7 Pro still using 5Ghz to connect wirelessly to Google Nest Wifi Pro.
#Google: fix this problem please.
The nest wifi speed caps are terrrrrrible
If i want to install Deco Mesh should i connect it to my router or can i just put it on 2nd floor then connect them through wifi connection? i need some help hahaha
It has to be connected to a lan cable with Internet
@@TechOdyssey So you connect your mesh with lan cable to the router then connect the other mesh with wifi connection later on? is that correct?
@@Z0FFY512 correct. The main unit connects to the internet and sends it to the other ones.
@@TechOdyssey Alright thanks man, so excited to setup my mesh
Did you wire to any of the mesh or were they all completely wireless?
What do you mean?
@@TechOdysseyi think he means Ethernet Backhaul. Using wired connection between your mesh nodes instead of wireless backhaul.
@@chris_schenkel what’s really sad is how pathetic you are as a human being. I was asking for clarification so I could make sure I answered his question appropriately. You’re just scum.
Sir can i plug a Playstation on the 2nd deco Lan port to play online?thanks
Yes. It will still depend on how strong the signal is between nodes. If nodes are connected via ethernet backhaul, then there won’t be any signal issues/lag.
Do they work together with each other?
Can you install a Nord Vpn to the TPLINK router?
Really enjoyed your explanation. You are the first person that I could actually understand what you were saying. I have att all in one router/modem and I have a Decx20 wifi 6 plugged into it, but I am still having problems getting signals to the back of my house. My house is 2200 and it is a perfect square. My base deco is only 20 feet from the first pod and is going through one wall, I am getting good speed there, but the other pod, which is about 20 feet or less is sending the signal through 3 walls and I cannot faster than 70 mbps. I checked the att apps for signal strength and it telling that the signal is week. DO you have any suggestions? Should I get rid of the att router? Thank you
Bypass the att router use mesh to assign ips etc …att 320-505 modem/router wifi sucks…at least in my opinion and house, and I only have a 1300sq ft single story
Morning Adam just a question I have Xfinity internet will that replace the router they give us and will that help eliminate them from throttling us / we pay for the 119mb speeds but can't stream vids very good over 480p ???
Is yours an all-in-one modem/router that is supplied to you by Xfinity?
@@TechOdyssey yes they charge 13$a month rental
@@gregoryaul2005 have you done a speed test to see what actual speeds you're getting over wifi? You can do a simple test by googling speed test and using the test there.
@@TechOdyssey yes I have it's close to what it should be but when I use cinama hd can't barley stream over 480p movies it buffers every 2 to 3 minutes for 5 to 7 sec.
@@TechOdyssey I use the Huawei p20 desktop mode to stream movies 👍