If this washer of mine stops halfway through a cycle because of the LC error code, is there a way to just override it with this? So i don't have to pull it out and reposition that leak sensor. I've cleaned out all the pipes and connections so there's no clogging anymore. I know it's just the sensor being so sensitive, I've fixed it being leaky, just some gunk was in the drain hose
I see videos on UA-cam about repositioning the leak detection sensors an inch or so off the bottom pan. But wanted to look into overriding this LC error code first
Yeah I did that also it seems to be doing something. I just bought it yesterday Samsung it ran once now won’t run again. It won’t lick in to cycle sound like it going to does the drain thing then looks like it going to work but never does just shuts off
@@rajanincanadaa for this error most of the time i replacedvthe case break assembly this is the part but you have to check with the model number amzn.to/3BdiIzD
The PC error code on a Samsung dishwasher indicates an issue with the Zone Wash function. This function allows you to clean dishes in a specific area of the dishwasher, rather than the entire rack. Here are some troubleshooting steps you can try: * Turn off the dishwasher and restart it. This can sometimes resolve temporary glitches. * Check if any buttons on the control panel are stuck. A stuck button could be preventing the Zone Wash function from working properly. * Run a normal wash cycle. If the PC error code only occurs during the Zone Wash cycle, try running a normal wash cycle to see if the dishwasher functions properly. * Contact Samsung customer support. If the error persists after trying these troubleshooting steps, you may need to contact Samsung customer support for further assistance.
@@How-123mine says "SC or 5c" in the middle of a cycle. I think I suppose mean drain problem, but I know the drain is fine, there was no water left at the bottom
Most likely is not getting water ,check the water line and the valve make sure is open,check power in the valve if there is power when you start the dishwasher replace the valve.
This worked, thank you 🙌
If this washer of mine stops halfway through a cycle because of the LC error code, is there a way to just override it with this? So i don't have to pull it out and reposition that leak sensor. I've cleaned out all the pipes and connections so there's no clogging anymore. I know it's just the sensor being so sensitive, I've fixed it being leaky, just some gunk was in the drain hose
I see videos on UA-cam about repositioning the leak detection sensors an inch or so off the bottom pan. But wanted to look into overriding this LC error code first
The switch is going to save you floor or cabinets,if you fix the leak is not going to happen again
I put mine in a ziploc bag and taped it shut because guess what? When I got the moisture code and opened up the bottom? No water anywhere. Bone dry.
Thank you!!!!!
Bottom of washer fills with water/steam but wont actually cycle/rinse while running. Any advice?
Check the drain and the heater if the machine is not getting hot or not draining is going to do exactly what you describe
@@How-123 it's getting warm and creating steam. But not draining or rinsing/cycling
Mine is doing the same. That's why I'm here looking also.
Hello, my diagnostic mode is 7C. Do you have an idea what that means? Thanks
@@kareemgrant5884 www.samsung.com/us/support/troubleshooting/TSG01001927/
@@kareemgrant5884 puh the arm in the bottom to the back slowly unplug and wait 5 minutes
How can i start it right away? No delays
This is for test only and is not 17 hours delay
Its on lock, find the lock icon and press 3 seconds to unlock
You make it
Yeah I did that also it seems to be doing something. I just bought it yesterday Samsung it ran once now won’t run again. It won’t lick in to cycle sound like it going to does the drain thing then looks like it going to work but never does just shuts off
Call Samsung service they will help you or replace the dishwasher if is broken 1-800-726-7864
I keep getting OC error when I do full cycle. If I do quick 1 hour wash it works
@@rajanincanadaa for this error most of the time i replacedvthe case break assembly this is the part but you have to check with the model number amzn.to/3BdiIzD
Hi I just bought Samsung dishwasher and after couple of use today I face blinking issue
How can I solve this issue?
Where is the blinking located under which section
Hi there. Thank u for ur video!
I followed ur instructions n it started blinking PC do u happen to know what that means?😁
The PC error code on a Samsung dishwasher indicates an issue with the Zone Wash function. This function allows you to clean dishes in a specific area of the dishwasher, rather than the entire rack.
Here are some troubleshooting steps you can try:
* Turn off the dishwasher and restart it. This can sometimes resolve temporary glitches.
* Check if any buttons on the control panel are stuck. A stuck button could be preventing the Zone Wash function from working properly.
* Run a normal wash cycle. If the PC error code only occurs during the Zone Wash cycle, try running a normal wash cycle to see if the dishwasher functions properly.
* Contact Samsung customer support. If the error persists after trying these troubleshooting steps, you may need to contact Samsung customer support for further assistance.
Thank u very much🎉
What does ot mean?
What do I do after this?
That depends on the issue with the dishwasher,what’s the problem with yours?
@@How-123 it shows PC error on diagnostic. So no water when running and the dishwasher tab doesn’t open. Thank you I appreciate your reply!!
@@Saywhatohno unplug the machine and press any button multiple times after that wait 5 minutes and try again
@@How-123 no that didn’t work.
Mine shows dC, please help.
Door is not closing right now check the alignment of the door and check the racks
So I did all of that… now what plz help 😅
What is the problem with the dishwasher?
@@How-123mine says "SC or 5c" in the middle of a cycle. I think I suppose mean drain problem, but I know the drain is fine, there was no water left at the bottom
@@dannyhou429 check the drain hose in the garbage disposal and check the pressure of the drain in a bucket
What about a 7e error code?
@@hotglassmcnash when the water wall deflectors is in the wrong position www.samsung.com/us/support/troubleshooting/TSG01001927/
Mine says 4c
Most likely is not getting water ,check the water line and the valve make sure is open,check power in the valve if there is power when you start the dishwasher replace the valve.
Im getting 3E
That is a leaking error
Most off the time the motor leaks sometimes the hose is broken-check under the dishwasher
@@How-123when you say motor, which motor do you mean
@@overydisc motor pump
SC1