No Sandblaster No Problem! Do This for Remove Rust
Вставка
- Опубліковано 18 чер 2021
- Rusting of metals over time is a major problem. There are various ways to remove this rust, the most important of which is sandblasting with a sandblaster. However, a sandblaster can be expensive and take up a lot of space. Also, sometimes small metals are not cleaned with a sandblaster. You can watch how to remove rust without a sandblasting machine in the method in this video.
- Навчання та стиль
![ПОЛНАЯ ИСТОРИЯ ЭКЗОРЦИЗМА [Топ Сикрет]](http://i.ytimg.com/vi/qBySr6Bt0B8/mqdefault.jpg)
I was fascinated then horrified when you put the drill battery casing in the vice.. With Lithium batteries in it!!!! 💥💥💥💥
2:09 I wouldn't advise clamping your battery pack in a vice.
Given that the most expensive component in this set up is the battery and the cheapest are the nails I would recommend buying new nails and saving the battery's life for better projects.
Actually it does have a role. I restore vintage vehicles. Sometimes rare nuts and bolts of specific sizes may come in British Standard Whitworth sizes. That’s when abrading small quantities is useful. Having said that, I own a glass beads blasting cabinet
Nobody likes a critic, except another one. He applied critical thinking and built a inexpensive tool, that works ! You, not so much. Just saying 🖖🏻✌🏻
Agree with JL, its the concept thats being demonstrated.
I have that exact same stanley driver. Lasted now 6 years with the two original batteries, and no real degrading yet on them. Use it frequently.
This process might be OK for restoring small vintage motorcycle parts. But batteries are expensive.
Рассмешил до слёз
😅🤣😂😉
Я думал,что дураки только у нас...
Glad to see I'm not the only one silly enough to clamp my drill or belt sander or dremel into a vise. (The battery circ saw was a bit too sketchy to do a second time but I still have all ten fingers) lol
If your going to do this put the drill on its back so the jar is upright. This will be less strain on the bearings
Larger items just use a concrete mixer with a few shovels off ballast
Świetny pomysł w betoniarce jeszcze lepiej wyjdzie 😀😀😀👌pozdrawiam
I'd dangle the drill & jar combo over the edge of your bench, so jar is upright. Clamp or weight & support drill so it stays put, and use a spring clamp on the trigger for easy on and off. Great idea. Cheap and easy.
I have a old rock tumbler, but I use a vibratory tumbler for brass shell casing cleaning. You just have to use a more aggressive media than walnut shells to cut rust and you can add vinegar.
bag play sand from Lowes its cheap too
Это не пескоструй. Это называется ГАЛТОВКА.
Да это галтовка,но ведь и в ролике написано,что когда нет пескоструя
@@user-gk2vf4ho8b нет пескоструя? Галтуй!
Great now I just have to get a jar large enough to fit my car in. But I’m gonna save so much money from not having a sandblaster.
FULL ROTISSERIE!!!
That oversized drill might run you a few dollars also. Probably should avoid battery powered ones...
Just get a handblaster connected to an air compressor. We have some at work that are custom built by maint that are just vaccume fed from a 5 gallon bucket
А у нас в России есть магазины, в которых продаются гвозди, болты и шурупы ))))) приезжайте, закупайтесь)))))
Из-за трёх ржавых шурупов ушатать шуруповёрт...гениально👍👍👍
The before and after photos were taken at different exposures to make the result look better, but more importantly the drill would soon wear out running it constantly for that length of time.
the drill will become wobbly to. The main idea isnt bad
Only six out of ten items are shown at the end. Presumably four items were still too rusty to show.
Not just different exposures, different color temperatures too. I think the basic idea could work but it would take a lot longer than 2 hours and it would be a hell of a wear on a drill. Honestly I'd expect that the lid of the jar would fail from metal fatigue before the rust was gone. But using a rotary tumbler does work, if slowly.
With a battery that size, wouldnt last that long
if a new drill they normally have a years manufacture warranty problem solved
Si alguien quiere probarlo ya le aviso, el taladro se para por seguridad a los pocos minutos y el tape del bote se acaba rompiendo por el borde de la arandela por sobreesfuerzo
Make that hole slightly off center and you might get better results? Might give it a lil oomph. But it's gotta be just slightly off center so you don't shake the whole thing apart.
Sir, I would like to beg you, on behalf of the battery pack, to please mount the drill into the vise using the grip part of the drill and NOT the battery pack. If the battery pack gets damaged it can not only be costly, but you can end up with a fire situation that is nearly unstoppable until the lithium is fully consumed by a very hot, very sparky, and very nasty dribbles below it, and very nasty fumes and gases which are not only unpleasant, but also not conducive to human life. For this purpose, I would employ a cheap corded drill. Also sir, if you would read the manual again, I bet you would find some small print that states that running your nice Stanley cordless drill at lower than full speed for an extended period of time will damage it. Specifically the switch and speed control circuit. The lower speeds are only for starting drilling and starting the insertion of a fastener, but never for very long at the slower speeds. Yes, I'm one of those geeks/nerds who reads every word of my instruction manuals. It saves me money in the long run from not having to fix or replace my tools. I make my money repairing things, much of the time because they never read the manual. Oh, I would bet good money that the Stanley drill is actually a Dewalt with the Stanley name on it. After all, Black and Decker, Dewalt, and Stanley are all under the same corporate roof, the same company. That is, unless it is counterfeit, but even then, even the real ones are made in China too, so go figure.
Thank you fire marshal bill! 😂
It's a good idea to mix the three components properly you need for mixing black powder.
This is a display of how well a Stanley drill is made. I would have expected smoke to be coming out after two hours!!!
If the drill won't last 2 hrs it's a piece of shit obviously you don't use battery tools very much go back to your Lego 🤫🤫🤫💯🇦🇺
use an old rock tumbler. you can plug it in and let it run for a day
Oddly some of the components were eaten entirely by the sand, whilst it made some extra different ones. I think you’d have to be reclaiming a LOT of nails to make the effort worth while…plus of course once the dreaded red rot has a hold it always returns in short order.
Уникально! Сейчас подыскиваю большой шуруповёрт и банку чтоб жигуль поместился
Тоже об этом подумала, но мне шурик поменьше надо - у меня Ока))
Ребят! У меня хаммер H2 что мне делать?
@@crazytravel2925 высади его в грядку, поливай почаще, не скупись на удобрения - может чего доброго из него и вырастет?)))
@Volodymyr L хмм... буква "Z" настолько животворящая, что удаляет ржавчину? Или помимо этого еще и предовтращает появление новой?
The DIY Rust Removal idea is a pretty good one but I wouldn't use a Glass Bottle for obvious reasons. Maybe I'd even use a larger Plastic Liter Bottle instead. You get more space for more stuff and you Won't have to worry about breaking the Glass....
Knights servents used to clean the chain mail armor this way 1000 years ago.
Didn't have a drill but rolling a drum with the armour and sand in it did the job.
Fantastic. i loved the clamping of the battery :)
Вот просто интересно... Какой дурак пескоструит гвозди и болты? 😮
Может просто для примера.
awesome! and use washer for larger stuff.
Cool good idea great for hard to find bolts
Super gelöst - erst die Mitte genau anzeichnen und dann daneben bohren...😁
Quick and dirty yet effective.
Good concept. Half-assed execution.
Идея норм, но шурик жалко)
i hope this is a joke ,you wasted 2 hours worth of battery power , where you could have just used a wire wheel attachment on the drill that would have taken 2 minutes to clean them parts .
🙈🙊🙈🙈🙊😂😂😂😂😂🙈🙈🙈🙈🙈It's a joke for me
Уже давно придумали преобразователь ржавчины! Но поржал не слабо)))
I like how you made everyone comment on the danger of the battery,,i can tell you have the same middle name as i do,, DANGEROUS
i would have taken a metal can.
even though glass can be as hard as steel, it can still break without warning, posing a risk of injury.a friend used an old concrete mixer.
I use a cheap $25 kids Rock Tumbler and the clean bag play sand from Lowes and you dont have to worry about a drill battery running down, and you can let it go all night
Ridiculous result after 2 hours hard work for the poor driller.
Great video
drill a hole sandwiched between to bits of scrap wood. no burrs. no rough edges, Savvy.
Ill give you points for ingenuity. However, you made a complicated solution for a simple problem. You would have been better off just using rust remover or a small, cheap sonic cleaner and would have gotten better results in less time.
Exactly what this guy said 👆
Free though.
Put the Bit in your pocket. The rusty stuff in the shitcan. Punch Out! Go home. We don't have time to do this.
Ni cerca a un sandblasting, posiblemente se daña mas rapido el taladro
If you reload ammo, use your case tumbler and an abrasive media such as sand, rice, small ball bearings . . . whatever. Wonderful for cleaning fasteners and small parts.
Good plan.
Идея, конечно, хорошая...
Так не только ржавчину, так и заусенцы снимать можно. И называется сей процесс - галтование, а банка в данном случае играет роль галтовочного барабана.
Ось вращения желательно сделать тоже с перекосом.
Но... Я бы не стал для этого шуруповёрт использовать, да и зажимать инструмент в тиски за аккумулятор - тоже идея так себе...
Это идея?такая идея стара как мир и в таком исполнении вообще недопустима,с такими боковыми нагрузками шурик умрёт, а за 2 часа обычным ёжиком можно в 20 раз больше болтов зачистить,эти самодельщики уже не знаю из чего контент выжимать идей 0 ,а ролики штопают пачками
Пусть яйца свои так галтуют!
Чтоб блестели, как у кота!
👻👻👻👻👻👻
Good idea ! Works ! 🖖🏻👍🏻
Bella idea, anche se io non la farei mai visto la probabilità alta di danneggiare il mandrino del trapano...
Спасибо! Поржал! Лайк однозначно.
Excellent. Can you kindly let me know what substance was poured into the bottle. Thank you
Nice idea
Есть два ящика ржавых гвоздей , почистите ?
может лучше керосином залить ??
Heroic!
OK good result. Well done! Nice tip.
If you add vinegar it will go faster
Just put vinegar in the jar and put the lid on, wait 24 hours and rinse. Those will be shiny new!
I do as you mentioned (using white vinegar) which is a great way to remove rust. Only drawback I find is the surface finish becomes dark grey after treatment.
@@SadAnorak Depending on level of rust you might need to give it a quick brushing and rinse with water.
Prima Idee. 😄 👍🏻 Und mit was wurde poliert? Quarzsand? Welche Körnung?
Not a bad idea,but for brackets and more intricate parts submerging in a product like Por 15 metal prep over night will do the best job ever ☺️👍🏻
itu serbuk yg d pakai serbuk apa pak ?
походу один шуруп, один болт и одна бита сгалтовались в пыль))))))))))))))))))))
Более тупой вещи трудно себе представить.
I’de just use either battery acid or Muriatic Acid “ hydrochloric” used fir swimming pools. Leave uncovered and away from all sparks as it will give off hydrogen gas. Then thoroughly flush with a mixture of water and baking soda. Probably less than 30 min and better results. However dealing with dangerous acid, take all necessary actions to protect eyes, skin, clothing and don’t breath fumes which are irritating and explosive and give off heat. I would suggest outside in heavy steel container or glass jar, maybe even put in ice water bath so the heat doesn’t cause it to ignite and blow up in your face if you are near it when bubbling.
Or you could just use a wire wheel on a bench grinder
And get a much better result, wasted several minutes of my life watching this crap.
vnteresting, I have 2 questions
What rotation time did you use on the cordless drill?
on electric drill, faster, have you tried?
if so, with what results?
2 Heures de rotation c écrit dans la vidéo à 2min39 . Pas très rentable mais c mieux que rien si ont à pas de sableuse . Une bétonnière peut aussi faire l'affaire pour une + grande quantité de pièce à dérouillé .
@@rorodu5510 merci bien,
je vais essayer la perceuse électrique
If I had an idea like that I wouldn't tell anybody and I certainly wouldn't film and post it on UA-cam.
Excelente idea, pero si no quieres hacerlo con arena también lo puedes hacer con WD-40 😉
How am I suppose to fit my truck into that jar??.....I guess I need to pop in the movie "Honey I shrunk the Kids" to build a reducer machine!!.....But that will be more expensive than buying a Harbor Freight sandblaster unit!!.....Scratching my head here on this design!!
Молодец! Вот только мне нужно было, отпескоструить автомобильные диски, как думаешь, твой метод подойдёт?
Судно конечно уважуха.
3 screws disappeared to nirvana, was the blast so powerfull????
My 15,000 gallon pickle jar broke after the C10 cab rolled over after 9 turns. I lost 8,000 lbs. of media on the driveway and took a 4 days to clean it and glass up. Drill quit working! Bigger bolt?
Bravo
How long does one battery run on a charge?
Найти бы банку под Ролс-Ройс, да шуруповерт приличный, а уж камаз песка найдем! )))
my only comment.. WHY use a glass jar?if you want to make a parts tumbler, make it with something that wont shatter when you accidently depress the trigger of the drill and send jar, lid, and metal parts flying all over the place?
Just buy some new bolts it would be quicker and cheaper. Stay safe and well, ICAN, cheers, Schnuz.
Mejor los remojas en un poco de coca cola y listo, así evitas dañar con el tiempo tu taladro
The best part was when you used the angle to mark the center of the jar ,
10 seconds with a sand blaster vs 2 hours with a glorified rock tumbler
One minute with a wheel this is made by a total looser he probably showers with dust he's that wet he MUST get plenty of laughs 🥱🥱🥱🥱💯🇦🇺
Шуруповёрт долго не проживет, нужен отдельный привод.
Two minutes with a wire wheel on a bench grinder would have required a lot less time and work for that few items.
Yaaaaay! I'm going to make 1 of these and throw my rock tumbler away!
Dos horas un taladro encendido para lograr un resultado tan pobre.
Yeah, with electricity prices this winter better do by hand. 🤪
Super idée sa va me servir merci
There isn't anyway in hell that the drill battery would last that long on one duration
I'd be curious how long the drill itself would last. Two hours continuous drilling represents a whole lotta holes drilled.
Not what I was expecting, thought it was going to be a sandblaster.
Use a shop vac. Fill with sand and parts and turn on. Its like a tornado inside a vacuum. Just like its a vacuum inside a tornado. 😅
Ну и как в багку засунуть раму газ 53.
great video but what good is it if we don`t know what you put in the jar. was it coffee or breakfast cereal or what
sand
good battery
Impressive! Imagine a sand blasting machine where you don't have to do it yourself.
Wow !! Absolutely awesome how they never altered, even after 2 hours, pmsl. Don't make any more videos, please 🙏
pure lemon juice + salt and 15 minutes, and ready. Jugo de limón puro + sal y 15 minutos, y listo.
Invece di fare tutto questo traffico e magari danneggiare il trapano, immergi gli oggetti per una nottata nell'aceto puro e vedi i risukltati ancora migliori.......
Exacto!
Well, that’s about 3 1/2 minutes I’ll never get back.
so sydykovs solution: get a plastic peanut butter jar - add rusted nails bolts etc.. add sand..
shake vigorously...
Из раздела когда делать нечего коту
I would not fancy putting my battery in a vice.