I must say, You've inspired me to restore that jerky, rusty, and Old Vespa counting its days in my Garage, I now see that Machine with a whole new sight and am hoping to restore it to its glory, Its's a Vespa Select II Night Visio, I'd be very happy if you could suggest me anything regarding my new journey. Thank you for this great content.
I have a vespa px125 that has been stood for many years. I have replaced the carburettor due to the old one being gummed up. But now I can not get the engine to run unless the choked is engaged Any ideas?
Edit:@ 0:39, the tilting of scooter while starting after a longer period has to do with fuel cut off due to positioning of the petrol tank with reference to the carburetor. It has little correlation with your carb's setting or jet cleaning. **apologies**
Build it Ride it, so to confirm, the idle screw on the top you tighten fully in (so it stops turning) and the the mixture/air screw at the back is roughly 1 turn out to start the process? Yes?
Please do it gently. Do NOT tighten the idle or mixture screw in too tight (just until you feel it stop). Unfortunately I have seen so many mixture and idle screws driven in their seats and ruined by over tightening. (61 years as a Vespa mechanic).
I have a PX-200 Vespa.rear shock gets stuck with the rear wheel while moving vespa. What is the solution--details can be useful through video. Thanks.Iam waiting for this.
@@BuilditRideit Unfortunately that is an uncalled for over reaction. I definitely will not watch this channel again. I'll add the !!!'s just so you see how it feels!!!!
LML scooters will always be one of my favourite 2stroke machines ever.... Wish I had access to one of these...
I love your channel and videos! You have a really comfortable and caring vibe. Thank you!
I must say, You've inspired me to restore that jerky, rusty, and Old Vespa counting its days in my Garage, I now see that Machine with a whole new sight and am hoping to restore it to its glory, Its's a Vespa Select II Night Visio, I'd be very happy if you could suggest me anything regarding my new journey. Thank you for this great content.
Lovely!! I have extensively covered most of the basic maintenance part, hope it helps you.✨
Thanks alott brother ...helped me a lot this lockdown.. when I was free tried to start our old LML NV. Used the same trick to start the scooter
I have a vespa px125 that has been stood for many years. I have replaced the carburettor due to the old one being gummed up. But now I can not get the engine to run unless the choked is engaged
Any ideas?
Very informative. Thanks for making it so clear.
Thank-you
Edit:@ 0:39, the tilting of scooter while starting after a longer period has to do with fuel cut off due to positioning of the petrol tank with reference to the carburetor. It has little correlation with your carb's setting or jet cleaning.
**apologies**
With the choke, that's not needed.
@@AmolAmrit yep
Sir will this trick also work for increase mileage
How many turns to mixer screw
Hi, i don't have that screw in the back of the carburetor Whenever i set my vespa 150 px to a stop it turns off.
How many turns u turn sir
Great work man
Just what I needed..TY🇬🇧
Great vid really helped me thanks. I have just bough an lml nv spl, what are the fuel tap positions please
The fuel tap will have markings of the tip it self, when its turned towards left, its off, if upright then on, and if towards left then reserve.
@@BuilditRideit no markings on mine but thanks for reply, are those positions as I sit on it yes?
Hi my tap has an R on left side and C on right side.
@@scoffs8919 Just follow along with the markings, It should be as it denotes.
Does both jets are completely tight?
Best video
Hi, can you confirm? Did you tighten the top screw completely (firmly) before starting the process?
If you are talking about idle screw, then yes I did tighten that.
Build it Ride it, so to confirm, the idle screw on the top you tighten fully in (so it stops turning) and the the mixture/air screw at the back is roughly 1 turn out to start the process? Yes?
Please do it gently. Do NOT tighten the idle or mixture screw in too tight (just until you feel it stop). Unfortunately I have seen so many mixture and idle screws driven in their seats and ruined by over tightening. (61 years as a Vespa mechanic).
What is the adjustment screw under the rubber plug in the carb cover for, please?
@@robertdillahayii4763 it’s used for tick-over idle adjustment. You can slow or increase the tick over speed with a screw driver.
Perfect video 👍🏻
Thankyou😊
Engine ki speed chlte chalte jayda ho jati hai to kaya kare
It looks like the outside of your carb is really oily and dirty. Subsequently, there's probably crud in your jets, too.
Yep, that time it had overflow issues, now it's solved.
Please help me how to clean the carburettor, also I have only 6v power, please show videos for this & to increase to 12v.
Best regards
Imtiaz
Do you happen to have a source where i can buy bnew lml star 4t accessories and parts?
Unfortunately, they no longer are sold at any outlets here.
Buenos días amigos porfavor pueden pasar lo en Castellano porfavor 😢
Whats should be approximate mileage
I am getting around 30-35
Relly helpful
I have a PX-200 Vespa.rear shock gets stuck with the rear wheel while moving vespa. What is the solution--details can be useful through video. Thanks.Iam waiting for this.
SIR JI MIXTURE KO FULL TIGHT KARNE KE BAAD KITNE ROUND ANTI CLOCK WISE KHOLNA HA
Bro carburettor ache se fit nhi ho rha
You should have pulled choke to start without tilting ur scootee
Yep learnt it😉
simple way is just tighten mixture screw totally and then loosen anti clockwise 1 and half turns
Great!! Now do a video about it
Bro pickup low trick please
try cleaning the jets or adjust to richer mix n higher idle rpm i guess
SIR JI SCOOTER KO GAALI NAHI DIJIYE
1st
I almost always wait for your comment.Thankyou😊
@@BuilditRideit hahaha tnx
Hi sir Aap hindi me video banao mujhe english samajh me nahi Aata
Jaroor umakant ji, me koshis karunga ki hindi me bhi video banau.
Sujhao k liae dhanyawad.
Hindi me baat kr leni thi ya konsi America me ata h
Hindi video dekh Leni chahiae thi, konsi mene kanpati pe banduk taan rakhi thi.
@@BuilditRideit Sahi hai , mere ko kaun sa necessary tha ke me Hindi video dekhu ,but comment awesome tha
@@BuilditRideit thug life 🤣👌
J koi cheej dsni hove ta punjabi ja Hindi ch boli da hunda ta Jo saria nu samj aa ske
ਸਾਰੇ ਪੰਜਾਬੀ ਹਿੰਦੀ ਨਹੀਂ ਜਾਣਦੇ ਦੋਸਤ
Please use a tripod!
Thanks
THANKS TO GOD KI KAOYO KE PAAS YEH BHI NAHI HOGAA
You speaking in hindi you are a Hindustan I.
Jogesh ji, Shayad agli video hindi me hi aaye, aap dekhte rahen
It's not a proper explanation, it's a confusing, why I ideal screw rotated in the middle of the video ?????
Great, why don't you create a video and help the community by sharing it!!
@@BuilditRideit thank you for the attitude
@@BuilditRideit Unfortunately that is an uncalled for over reaction. I definitely will not watch this channel again. I'll add the !!!'s just so you see how it feels!!!!
Not explaining properly
May be it's a learning deficiency.🙂
That’s typical of a person who lack of the knowledge, trying to explain thinking that you know it perfectly
Go ahead read the comments, your type( impaired brain functioning) seems to be a minority.