Your Mac is a beast! 555 is that 57cc, I have a 10-10s that I believe is 57cc also. I run the archer bar and chain combo on my pro mac 700 and 10-10s the 700 has the 28 full skip, the 10-10 20in, they seem to hold up really well, I actually prefer them to Oregon,I am currently waiting to test some Duke chain, cool video!!😊
Thanks! I have a few of the 10 series! I have the "Professional" 10-10 that's in beautiful shape, needs a tank gasket. That Archer bar was the only 28" I could find in the Husky small mount and it's a 3/8 full house. A skip would probably be a bit better! Thanks for watching!
That 359 good job. My go to fire wood saw. Yours sounds highly tuned that sound is unmistakable though. If you watch your new saw in action you can see it smoke when you cool it down before shutting off.
I also have the 359 Husqvarna. It has been running for 14 years without any problems. No repairs have been made to date. Great video thank you. Greetings from Germany Peter 😎 Husqvarna pit😊
Ok i thought so,i wanted one but couldn’t justify the cost for some branch take downs so bought a cheap knockoff on Amazon hopefully it will do the job thx 👍
Fantastic fun, i don'e have much experience with saws as i only started last year in the fall but i did manage to get the 051 running and cutting, so far my favorite saw i have ran, i heard you mention one early on that you had but did not take, yeah that 440 strong runner al your saws are good.
For a $200 amazon clone it seems to run pretty well. You commented on its fit & finish vs OEM but how would it compare to the fit & finish of your Famertec 440? PS - that 359 is down right nasty - nice work 👍👍
The Farmertec is impressive in that respect! The recoil is a bit janky, the plastic spool that hold the rope is thin. It's missing a small piece on the side wall of the spool but it's not affecting the function. The fits are much better and the color match is pretty good too! The 359 is a sweet saw! I still can't believe how well it runs! Thanks for watching and the comments! 🤙🏻
@@sawsonthefarm Yeah I've got a G372 Famertec and it's not a bad saw but... I went back on your channel to creep at your earlier 359 vids and you did a good job porting it - she pulls a long bar np problem. Nice work.
Also I love the full wrap bar on your Mac, did you custom make it, I don't see any o.e.m. full wraps for the smaller 10 series just the 82cc variants like the sp81,850,800.
That bar was made for a pro Mac 81 I believe. I just made a mount for it. Check my McCulloch playlist I did a video on it! And yes they are hard to find too. They did make a full wrap for the 10-10's as well but I've never found one.
Hey great videos brother, give ya a tip on the 372 clone which u already know now of course , put a real husky side cover and some real dawgs you can’t bend with your fingers , a good bar n chain and they are really not too bad man, let’s face it’s it will never be a real husky , and it could use a better carburetor but then your just gonna keep getting deeper in the ole wallet and closer to the price u could get a used husky for , but in my experience with the Amazon cloned 372 that side cover and bar n chain are terrible, chain tensioner is garbage , the solid nose bar (which is advertised as a sprocket nosed ) is junk and your correct it does say 25:1 fuel ratio online , I ran 50:1 like I do in all my saws , I know this is a long comment but I loved the video, be safe brother !!!
I completely agree, bar, chain, adjuster, general fit of plastics, carburetor... they are what they are! Basically a toy for me to play with! No I won't be throwing high dollar OEM components at it, just my time playing! I'd have to say what impresses me most is, for $170 delivered to my house I got a complete saw of that size that actually runs! It blows my mind. How? It's all in good fun! I'm good with the long comments, I do the same! Appreciate your words on all of it! Thanks for checkin out my videos! You stay safe as well my friend. 🤙🏻
@ thanks! I can't fall into that! They have their place and can be a lot of fun on the cheap! But I do truly believe they can't replace a factory saw for quality and reliability.
What a wonderful video. Love seeing the different saws in action.
Thanks for sharing
Stay sace
Thank you sir! We had a blast! There was eight of us there! Just an awesome day doing what I love with some family and friends!
@ that’s awesome, working and spending time with family, you can’t go wrong
Thanks for the video. Glad you had a great time with your son 🪵🪓
Thank you, I did!
Good time right there😎
Absolutely brother!
Your Mac is a beast! 555 is that 57cc, I have a 10-10s that I believe is 57cc also. I run the archer bar and chain combo on my pro mac 700 and 10-10s the 700 has the 28 full skip, the 10-10 20in, they seem to hold up really well, I actually prefer them to Oregon,I am currently waiting to test some Duke chain, cool video!!😊
Thanks! I have a few of the 10 series! I have the "Professional" 10-10 that's in beautiful shape, needs a tank gasket. That Archer bar was the only 28" I could find in the Husky small mount and it's a 3/8 full house. A skip would probably be a bit better! Thanks for watching!
That 359 good job. My go to fire wood saw. Yours sounds highly tuned that sound is unmistakable though.
If you watch your new saw in action you can see it smoke when you cool it down before shutting off.
Thanks! I love running that thing!
I also have the 359 Husqvarna. It has been running for 14 years without any problems. No repairs have been made to date. Great video thank you. Greetings from Germany Peter 😎 Husqvarna pit😊
That's awesome! Good to hear it's got longevity!
@@sawsonthefarm Yes, it's really good.
Greetings from Germany
@@naturundhund Yes. It is just strong. Revs high and light to use. Just have to clean air filter every time as it is a bit small.
Great video just wondering what top handle saw is that on the bench by the wood stove thx.
Thanks! That's an Echo CS-341, nice little saw!
Ok i thought so,i wanted one but couldn’t justify the cost for some branch take downs so bought a cheap knockoff on Amazon hopefully it will do the job thx 👍
@ I'm sure it will work just fine!
Fantastic fun, i don'e have much experience with saws as i only started last year in the fall but i did manage to get the 051 running and cutting, so far my favorite saw i have ran, i heard you mention one early on that you had but did not take, yeah that 440 strong runner al your saws are good.
That's awesome! A very good saw! Thanks for watching!
51 rancher classic
@@Arkansasfestus I was talking about a stihl 051 but have heard of the rancher 51
51 is still a good saw! They all have their uses!
@@diggindiggenit6540 excuse me feller
For a $200 amazon clone it seems to run pretty well. You commented on its fit & finish vs OEM but how would it compare to the fit & finish of your Famertec 440? PS - that 359 is down right nasty - nice work 👍👍
The Farmertec is impressive in that respect! The recoil is a bit janky, the plastic spool that hold the rope is thin. It's missing a small piece on the side wall of the spool but it's not affecting the function. The fits are much better and the color match is pretty good too! The 359 is a sweet saw! I still can't believe how well it runs! Thanks for watching and the comments! 🤙🏻
@@sawsonthefarm Yeah I've got a G372 Famertec and it's not a bad saw but...
I went back on your channel to creep at your earlier 359 vids and you did a good job porting it - she pulls a long bar np problem. Nice work.
Do you make your own pipe for your chainsaw
Yeah, I've made a couple full pipes and a bunch of muffler mods.
Chain 😮
Yeah pretty loose!
Also I love the full wrap bar on your Mac, did you custom make it, I don't see any o.e.m. full wraps for the smaller 10 series just the 82cc variants like the sp81,850,800.
That bar was made for a pro Mac 81 I believe. I just made a mount for it. Check my McCulloch playlist I did a video on it! And yes they are hard to find too. They did make a full wrap for the 10-10's as well but I've never found one.
Hey great videos brother, give ya a tip on the 372 clone which u already know now of course , put a real husky side cover and some real dawgs you can’t bend with your fingers , a good bar n chain and they are really not too bad man, let’s face it’s it will never be a real husky , and it could use a better carburetor but then your just gonna keep getting deeper in the ole wallet and closer to the price u could get a used husky for , but in my experience with the Amazon cloned 372 that side cover and bar n chain are terrible, chain tensioner is garbage , the solid nose bar (which is advertised as a sprocket nosed ) is junk and your correct it does say 25:1 fuel ratio online , I ran 50:1 like I do in all my saws , I know this is a long comment but I loved the video, be safe brother !!!
I completely agree, bar, chain, adjuster, general fit of plastics, carburetor... they are what they are! Basically a toy for me to play with! No I won't be throwing high dollar OEM components at it, just my time playing! I'd have to say what impresses me most is, for $170 delivered to my house I got a complete saw of that size that actually runs! It blows my mind. How? It's all in good fun! I'm good with the long comments, I do the same! Appreciate your words on all of it! Thanks for checkin out my videos! You stay safe as well my friend. 🤙🏻
Me too brother ! I got mind for under 200$ bucks to my front door !!! It’s a lot of cheap fun ! Thanks
That clone saw the exhuast stinger is the size of a weed wacker!
That's the first thing that's gonna go. It's terrible!
I put a 10 10s long block in my 10 10, my 54cc i think is snapper then the the 10 10s
👍
My Stihl 044 puts all these to shame
I would hope so, yours is a factory saw! These clones just aren't the same.
@@sawsonthefarmglad to hear some honesty, lot of lads on UA-cam spewing about clones, you got a subscriber
@ thanks! I can't fall into that! They have their place and can be a lot of fun on the cheap! But I do truly believe they can't replace a factory saw for quality and reliability.
😊
its hot like were in the desert here in nz
Send a little a that here please! I'm ready to roll right into spring!
You really spend a lot of time
Standing tapping the throttle
Before actually cutting. Is this
Just a bad habit or are you
Trying to juice the saw?
Just warming it up, and probably some habbit! lol!